Fluke 2AC VoltAlert Voltage Detector (200-1000V) Details
Low cost, pocket-sized and found in toolkits worldwide, the Fluke 2AC is a quick, accurate and safe way verify the presence of AC voltage from 200 to 1000V.
Thanks to low power consumption and always-on technology, the 2AC is ready when you are and doesn't require switching on. Just hold it near to a suspected voltage source and if voltage is detected, the tip of the detector will glow red.
Unique to this detector is a special battery testing mode that ensures the internal battery is in good condition. It's also CAT IV 1000V rated for user protection and has a clip for easy storage in your pocket.
The Fluke 2AC is supplied as standard with two batteries (AAA).
- Technical Specs
Fluke 2AC Technical Specifications
|Operating Principle||Senses the steady state electrostatic field produced by AC voltage through insulation
without the need to make contact with a bare conductor. Red glow at tip indicates voltage
|Safety Compliance|| Meets IEC 61010-1: 2001, UL 61010-1 (2nd. ed.), CAN/CSA-C22.2 No. 61010-04, ISA-82.02.01
Pollution degree 2
|EMC Compliance||Meets IEC 61326-1: 2006|
|Operating||200V AC to 1000V AC, CAT IV 1000V rated|
|Temperature||Operating 10 to 50°C (-14 to 122°F)
Storage -10 to 50°C (14 to 122°)
|Humidity||0 to 95% (0 to 30°C)
0 to 75% (30 to 40°C)
0 to 45% (40 to 55°C)
|Altitude||2000m (CAT IV 1000V)|
|Cleaning||Clean with a damp cloth|
|Battery Life||Typical battery life greater than one year|
|Warranty Period||Two years|