Transmille 17th edition test equipment calibrator for testing calibration of 17th edition test equipment

Click image to enlarge

The Transmille 2080 unit is a purpose built unit to assist electricians with the requirement of the NICIEC to calibrate all of their 17th Edition Equipment.

Tests...

• Insulation & Continuity Testers

• RCD Testers

• LOOP Testers

• Combined Installation Testers



A fully featured test box for use in testing electrician’s equipment, the 2080 provides a fast solution for the requirement of regular verification of electrical test equipment.



Designed with low cost and portability in mind, the use of the 2080 provides on or off site verification of RCD Testers, LOOP Testers, Continuity and Insulation Testers.



The 2080 is simple to use and provides the following functionality :
2080 - GENERAL



Checking of Insulation Testers

• 3 high value resistors (1MW, 9.9MW & 99MW) for testing the resistance measurement function.

• LED indication of test voltage at 100V • 250V • 500V • 1000V

• 3 low value resistors ( 0.5W, 2W & 10W) for testing the continuity function.

• AC line voltage output for testing voltage measurement

Checking of RCD Testers

• Dedicated 13A socket provides functional check of RCD tester operation

• 3 selectable ranges : 10mA@150ms • 30mA@150ms • 150mA@30ms

• Indicators for Ready • Tripped • Overcurrent

Checking of LOOP Testers

A functional check of LOOP Testers, allowing direct measurement of supplied loop impedance and supplied loop impedance + 1W via a dedicated 13A socket.

Wiring Check

When connected, the 2080 checkbox will indicate voltage between the following wires *

P-E (Phase to Earth) • P-N (Phase to Neutral) • N-E (Neutral to Earth)

* Does not detect Neutral to Earth reversal

Certification



Calibration Certificates traceable to UK National Standards or UKAS are available.

2080 - SPECIFICATIONS SUMMARY

LOOP Testers

Supply Loop • Supply Loop + 1W : 5%


--------------------------------------------------------------------------------

Insulation Testers

1MW : 9.9MW : 99MW : 1%

Max. Test Voltage 1.2kV


--------------------------------------------------------------------------------

Continuity Testers

0.5W : 2W : 10W : 1% ± 20mW

Max. Current 300mA


--------------------------------------------------------------------------------

RCD Testers

10mA (Nominal) @150ms

30mA (Nominal) @ 150ms

150mA (Nominal) @30ms