Seaward IR800 Hand Held Installation Tester

Click image to enlarge

Hand-Held Insulation Tester

The IR800 is the latest hand – held, battery operated insulation tester incorporating resistance and continuity ranges from the Seaward range. Once again the Seaward range offers a number of unique features, including voltage measurements up to 1000AC or DC, a dual safety rating, extensive and a unique robustness, which provides a unique and safer feel.

IR800 is an Electrical Insulation Tester and performs the following measurements:

Insulation Resistance from 0.001M Ohms to 2000M Ohms.

Low resistance, up to 20 Ohms, with a resolution of 0.01 Ohms, to meet Part 4 of EN61557.

Resistance, with short/open beeper actuated below 30 Ohms in a 2000 Ohm range.

Voltage measurement up to 1000V AC or DC


Features

Regulation Compliance – EN61557 and EN1010 standards. Also, Safety, Environmental and EMC requirements.

Rotary Knob – to select:Insulation Resistance, Continuity, Resistance, Voltage, Battery Check.

Meets requirements of EN61557-4.

Resistance Function – When the unit is placed on ‘Ohms’, the initial mode will be a 2000Ohm range, with short/open bleeper for resistances 30 Ohms.

Battery Life is presented on the primary display as a percentage. It is checked using simulated load condition per EN61557.

A simple to use, multiple use, lock button is located on the front of the unit.

A unique backlight is part of the LCD display and has an on/off button.

The tester will auto shut off after 10 minutes, or 30 minutes under locked conditions.

The tester will ‘wake-up’ following a number of commands.

A beeper is incorporated to let the user know of several conditions during operation, including: detection of voltage AC or DC, the lock feature is activated, a Short/Open beeper will sound during resistance testing when selected and, a single beep will sound during a Test Lead Zero sequence.

A ‘Lightening strike’ icon blinks on the display when voltages 30V AC/DC are detected at the inputs in any function.



Technical Specification
Insulation Resistance: 2.000M Ohms, 20.00M Ohms, 200.0M Ohms, 2000M Ohms
Resolution: 0.001M Ohms on 2.000M Ohms range max
Accuracy: 2% + digits, 2.000M Ohms, 20.00M Ohms,200.0M Ohms range
Analog Bar Graph: 0 to 1 G Ohms, and infinity
Bar Graph Accuracy: 10%
Test Voltage: 250V; 500V; 1000V
Accuracy: +20% - 0%
Nominal Current: 1mA minimum per EN 61557
Input Protection: 1000V
Voltage Sensing: 0 to 1000V AC/DC to 400 Hz
Audible/ Visable Warning: 30 V AC or DC at inputs
Circuitry protection: Inhibited if 3oV AC or DC at inputs

Lo Ohms
Accuracy: 2% + 2 counts
Resolution: 0.01 Ohms
Open Circuit Test Voltage: 4V DC nominal
Test Current: 200mA, 0 to 2 Ohms
Input protection: 1000v
Circuitry Protection: Inhibited if 30 AC or DC inputs
Accuracy: 5% + 2 counts

Resolution
Resolution: 1 Ohm
Test Current: 25mA nominal
Input Protection: 1000V
Voltage sensing: 0 to 100 V AC/DC to 400 Hz
Accuracy: 2% + 2 counts
Audible/Visible Warning: 30 V AC or DC inputs