Metrel TEK1307 Solar Power Irradiance Meter

Click image to enlarge

Wanting a handheld device to help establish the efficiency of solar installations? This Metrel Solar power irradiance meter has been designed for high accuracy solar measurement, which makes it an ideal purchase for solar power engineers.

Rapid sampling is possible with this irradiance meter which has a sampling time of 0.25 seconds with a measurement range from 0 to 1,999w/m² or 0 to 634BTU/(ft²*h).

The TEK1307 is packed with useful features including a data hold function, a min/max hold function and a 50mm LCD screen for clear, accurate display of results.

A low battery indication is given when it is time to recharge or replace the batteries for the Solar power meter.

Included with the solar power meter is an impact resistant ABS carry case for storage, a protective lens cap for the device and an instruction manual.

High levels of safety are guaranteed with this irradiance meter which is compliant with the EN 61010-1 safety standard.

Metrel TEK1307 Solar Power Meter Key Features:
• Solar measurement up to 0 to 1,999w/m² or 0 to 634BTU/(ft²*h)
• High-accuracy and rapid response sampling
• Sunlight silicon photo diode sensor
• 50mm LCD display with Backlight and function indicators
• Data Hold function to hold measurement values
• Minimum and Maximum values
• Low Battery indication
• Impact-resistant ABS case
• Supplied with protective lens cap, and battery

Metrel TEK1307 Solar Power Meter Specification:
• Range: 0 to 1,999w/m² or 0 to 634BTU/(ft²*h)
• Resolution: 1w/m², 1BTU
• Accuracy: ±10 w/m², ±3BTU
• Power: 4 x 1.5V AAA Alkaline Batteries (ALR-3)
• Dimensions: 162 x 63 x 28mm
• Weight : 250g

Take a look at these other solar devices we supply:
Kewtech KEWPV1 Solar Irradiance Meter,  Seaward Solar AC/DC Clamp

Or visit our Solar PV category for our full range of Solar testing equipment.