Martindale CP201 250V Industrial Check Plug
Whether you’re in large or small premises, it’s important that you know if all of your mains sockets are working properly and safely. If you fail to check your sockets, and they turn out to be wired incorrectly, then you could soon find yourself in an awful lot of difficulty. With badly-wired sockets, you will be at a huge risk of an electrical fire, and at risk of electrocution every time you plug something into your mains socket. This is where the Martindale CP201 250V Industrial Check Plug comes in. This handy little device is a great way of ensuring that your mains socket is working properly and that all the wiring is working safely. The device works by simply plugging in the Martindale plug device into your socket.
The Martindale check plug will then automatically start testing the socket and let you know if there are any problems. There are LEDs on the front of the device, which will let you know if there are any problems with the socket. When there is a problem, you will see a red LED light showing. There will also be a warbled buzzing tone, which is also there to alert you to a problem. The orange light is also there to alert you to a problem. If, however, the Martindale CP201 250V Industrial Check Plug shows a green light and emits a constant tone, then you can be sure that the device has clarified that the industrial socket is working the way it should and is safe.
In the same way as the classic check plug device does, this can provide you with the knowledge that your industrial sockets are safe and that all workers are not going to be at risk of harm when working with the equipment.
• For use in factory industrial or maintenance applications
• Standard blue, 250V, 16A, BS 4343/IEC309, round 3 pin plug
• Identifies faulty socket wiring
• Simple three light system