http://www.pat-services.co.uk Portable Appliance Safety Services Ltd, the UK's leading online retailer of electrical test equipment, PAT testing products and accessories. We supply the latest PAT Testing equipment from manufacturers such as Megger, Robin and Seaward. Express delivery to the UK, Europe, Ireland and the USA. We also offer on-site PAT Training Courses. en info@pat-services.co.uk 2010 Portable Appliance Safety Services http://www.pat-services.co.uk/seaward-bluetooth-thermal-printer-1553.htm Seaward Bluetooth Thermal Printer Seaward Electronic's Bluetooth Printer is a small, lightweight portable thermal printer. The printer is powered via a large capacity Lithium-ion rechargeable battery allowing for extensive printing through a long life printer head. Clip it to your belt and Go! Seaward Bluetooth Thermal Printer key features Power on/charging LED indication Bluetooth LED indication Require 50mm diameter paper roll Weighs 380g Fully charged in 3 hours Line feed and on/off switches RS232 serial interface port Belt Clip PAT Tester Accessories http://www.pat-services.co.uk/seaward-bluetooth-thermal-printer-1553.htm http://www.pat-services.co.uk/martindale-cm51-mini-clamp-meter-1551.htm Martindale CM51 200A Mini Clamp Meter, small enough to fit in your pocket! The Martindale CM51 Clamp Meter is a budget meter with useful features like display hold, autoranging and auto power off. When measuring 40A and lower currents, this clamp meter changes resolution from 100mA to 10mA. Two ranges and autoranging makes sure that the most suitable range is used when carrying out your testing. Small jaws make sure the Martindale CM51 Mini Clamp Meter is easy to use within the 200A AC range, covering most applications. Martindale CM51 200A Mini Clamp Meter key features 3 1/2 digit LCD display Display hold DH button Display update 25 times per second Auto power off Low battery warning Overrange indication Martindale CM51 200A Mini Clamp Meter Specification AC A: 10mA to 200A, autoranging (2 ranges) (40Hz to 500Hz) Max Conductor: 27mm Operating Temperature: 0C to 40C at <80% RH Dimensions: 150 x 52 x 24mm Weight: 110g Overvoltage: Category III, 300V Martindale CM51 200A Mini Clamp Meter kit includes Martindale CM51 Mini Clamp Meter Instruction Manual Soft Case Carry Strap Battery Current Clamps Meters http://www.pat-services.co.uk/martindale-cm51-mini-clamp-meter-1551.htm http://www.pat-services.co.uk/metrel-a1002-tip-commander-1549.htm Metrel A1002 Tip CommanderReplacement Metrel A1002 Remote Probe for Metrel Installation Testers.  Have you lost or damaged your Metrel probe? No need to spend a fortune getting it repaired, simply replace it. Metrel A1002 Tip Commander for use with Metrel EuroTest Easi Metrel EuroTest 61557 Metrel EuroTest AT Metrel EuroTest XA Metrel SmarTEC range Metrel InstalTest range Please call us on 0800 247 1600 if you need a replacement probe for your Metrel tester. Sale & Offers http://www.pat-services.co.uk/metrel-a1002-tip-commander-1549.htm http://www.pat-services.co.uk/kewtech-kewcheck-105-socket-tester-1547.htm Kewtech Kewcheck 105 Socket TesterA Kewtech Kewcheck 105 Socket Tester is an ideal accessory for any PAT Tester. It is designed to identify a variety of faults with socket wiring, but most commonly used to reveal sockets with poor earth. Simply use your PAT Tester to test one socket of an extension lead and use the Kewtech Kewcheck 105 Mains Wiring & Socket Checker to test the rest! A Socket Tester really speeds up PAT Testing.Kewtech Kewcheck 105 Socket Tester key features Tri-colour LEDs with audible indication and self-check feature Error free indication of socket status Indicate 18 wiring conditions Patented fault locate shows actual position of pin Live, Neutral or Earth Audible fuse finding facility Drop proof from 1 metre Tests BS 1363 sockets 2 year unconditional guarantee Sale & Offers http://www.pat-services.co.uk/kewtech-kewcheck-105-socket-tester-1547.htm http://www.pat-services.co.uk/metrel-easi-a1214-ring-adaptor-1545.htm Metrel A1214 Ring AdaptorThe Metrel A1214 Easi Switch Adaptor allows for automatic R1 + R2 measurements (i.e. no need to swap leads over or use connectors).  When paired with a Metrel MI3101 EuroTest AT, Metrel MI3125B EuroTest Combo or Metrel MI3105 EuroTest XA, the Metrel A1214 Switch Adaptor connects to all the wires of the ring circuit at the distribution board and is operated by the Metrel tester. This is a cost effective and time reducing way to carry out ring circuit testing. Metrel A1214 Easi Switch Adaptor key features Easy to operate and connect Automatic R1 + R2 tests for dead circuits (i.e. circuits with no voltage) Simple one-touch button operation for live, neutral and PE resistance tests Once setup, theres no need to swap leads until all continuity tests are carried out When coupled with a Metrel EuroTest AT MI3101, Metrel MI3125B EuroTest Combo or Metrel EuroTest XA MI3105 the Metrel A1214 Ring Adaptor can automatically calculate R1 + R2) Metrel A1214 Easi Switch Adaptor kit includes Metrel A1214 Easi Switch Adaptor Metrel A1214 Soft Carry Bag Metrel A1214 Instruction Manual 2 x Crocodile Clips (Black) 2 x Crocodile Clips (Green) 2 x Crocodile Clips (Blue)Calibration certificate is included. Accessories http://www.pat-services.co.uk/metrel-easi-a1214-ring-adaptor-1545.htm http://www.pat-services.co.uk/testo-875-2-professional-set-1541.htm This excellent value thermal imaging camera set includes a telephoto lens and additional battery for professional thermal surveying.Testo 875-2 Thermal Imaging Camera kit includes: Testo 875-2 Thermal Imager Testo 875-2 Transit case 2GB SD data storage Testo IR software USB cable Li-on battery Mains adaptorTesto 875-2 Professional Set also includes: Additional battery Fast charger Sunshield 9 degree telephoto lens The universal Testo 875-2 Thermal Imaging Camera is suitable for HVAC, electrical, mechanical and building surveying; as well as a huge range of other applications.All objects with a temperature over absolute zero, (approx 273C), emit infrared radiation which cannot be seen by the human eye. The Testo 875-2 Infrared Camera converts infrared radiation into electrical signals and renders it visible with a thermal image.The Testo 875 Thermal Imager discovers anomalies and weak spots in buildings and industrial maintenance quickly and non-intrusively. Other methods may have involved taking apart pipeline systems or stopping production lines, with an infrared camera simply point and view.Use the Testo 875 Thermal Imaging Camera to detect energy loss, reducing costs to your customer or find problematic areas in electrical items before malfunction and risk of fire.Even small changes in temperature can be detected with the accurate thermal sensitivity of the Testo 875. Optional extras include a range of high quality lenses that ensure whatever you are shooting is in frame.Use the integrated digital camera to create reports for documentation, ideal for viewing back at the office and producing thermal imaging surveys. All Testo 875-2 Thermal Imaging Cameras include: Professional analysis software - Analyse and create reports from thermal images. Soft-case for your thermal imager - Keep your imager safe when on the job. Exchangeable lenses for more flexibility - Theres a wide range of lenses available. Intuitive menu - Easy-to-use menus with one-hand operation motor focus. Testo 875-2 Thermal Imaging Camera key features:High image quality - Small temperature differences can be seen due to the Testo 875-2 Thermal Imagers 80 mK thermal sensitivity.Detection of mould risk spots - Find areas in risk of mould by manually inputting the ambient temperature and air humidity of a room to calculate dewpoint. The Testo 875 Thermal Imaging Camera visualises risk spots there and then on the thermal image.Integrated digital camera - The Testo 875 Thermal Imaging Camera comes with an integrated digital camera for further analysis and documentation of a thermal image.Automatic hot/cold spot recognition - Critical temperature measurements are shown within the automatic spot recognition. Error localisation can therefore be seen on site, eliminating the need for repeat visits. Auto Hot/Cold Spot Recognition is great for reviewing surveys at a later date on a PC.Building Thermography uses -- Test heating systems and electrical installations- Detect pipe ruptures- Find construction faults and building quality- Prevent mould growth- Localise roof leaksIndustrial Thermography uses -- Regular electrical maintenance checks- Preventative maintenance- Reliable quality assurance and production monitoring- Fast and easy monitoring of filling levels- Reliable high-temperature measurement- Ensuring power generation- Superheating analysis of circuit boards Testo 875-2 Thermal Imaging Camera specification: High-quality wide-angle lens 32 with F1-optic (provides a wider viewing field) Minimum focus distance 10cm Detector 160 x 120 pixels, interpolating to 320 x 240 pixels Hi-res 3.5" LCD Display NETD < 0,08C (80mK thermal sensitivity) Refresh frequency 9 Hz Swapable Lenses (model dependant - 875-2) Auto hot/cold spot detection on screen Focusing by hand In-built digital camera (model dependant - 875-2) 2GB SD memory card (approximately 800 - 1000 images) Adjustable emissivity Display of surface moisture distribution (model dependant - 875-2) Wide temperature range (-20 to +280C) Weighs 900g Average 4 hours battery use Testo IR PRO reporting software included 2 year warranty     Electrical Applications http://www.pat-services.co.uk/testo-875-2-professional-set-1541.htm http://www.pat-services.co.uk/testo-875-2-thermal-imager-1539.htm Suitable for HVAC and all types of electrical/building surveys, the Testo 875-2 combines two thermal imaging cameras into one.Infrared radiation generated from objects with a temperature above zero (about 273C) cannot be detected by the naked eye. The Testo 875-2 Thermal Imager transforms infrared radiation into electrical signals which are converted into a thermal image.A Testo 875 Infrared Camera offers the user non-intrusive technology to detect weak areas in buildings and industrial areas. The beauty of a thermal imaging camera is the time and money it saves - No need to take pipelines to pieces or stop work on production lines, just aim the camera and let it do all the work.The Testo 875 two-in one Thermal Imager can detect energy lost through poor insulation or find overheating electrical faults before become a risk.Detect even the smallest fluctuation in temperature with the Testo 875 Thermal Imagers precise 80 mK thermal sensitivity. Additional accessories include high quality telephoto lenses, tripods and much more.Take a photo of what you are surveying with the built-in digital camera and then analyse the results away from site. All Testo 875-2 Thermal Imagers include: Testo IR Pro Software - For analysis and report creation of thermal images. Soft carrying case - Keep your thermal camera looking good for years. Replaceable lenses - Additional lenses ensure the right tool for the job. Simple menu system - Easy to navigate menus with one handed motor focus. Testo 875-2 Thermal Imaging Camera key features:Amazing image quality - See small temperature variations with the Testo 875-2 Thermal Imaging Cameras 80 mK sensitivity.Detect areas in risk of mould - Manually enter the ambient temperature and air humidity of a room to calculate dewpoint. The Testo 875 Thermal Imager then identifies areas where there is a risk of mould appearing.Inbuilt digital camera - An inbuilt digital camera allows you to take pictures on site which can be incorporated in to reports or analysed at a later date.Auto hot/cold spot detection - Vital temperature readings are shown in the Testo 875s automatic spot recognition. Any potential dangers can be seen there and then, saving time and money for yourself and/or customer. Automatic hot and cold detection is ideal for reviewing surveys at a later time on your computer.Building Thermography uses -- Test heating setups and electrical installations- Detect burst/damaged pipes- Find building faults and verify new constructions- Prevent mould and damp patches- Localise roof leaksIndustrial Thermography uses -- Regular checking of electrical objects- Preventative maintenance- Reliable quality assurance and production monitoring- Monitoring of unseen filling levels- Trustworthy high-temperature readings- Ensuring correct power generation- Avoiding damage from over-heating circuit boards Testo 875-2 Thermal Imaging Camera specification: High-quality wide-angle lens 32 with F1-optic (provides a wider viewing field) Minimum focus distance 10cm Detector 160 x 120 pixels, interpolating to 320 x 240 pixels Hi-res 3.5" LCD Display NETD < 0,08C (80mK thermal sensitivity) Refresh frequency 9 Hz Swapable Lenses (model dependant - 875-2) Auto hot/cold spot detection on screen Focusing by hand In-built digital camera (model dependant - 875-2) 2GB SD memory card (approximately 800 - 1000 images) Adjustable emissivity Display of surface moisture distribution (model dependant - 875-2) Wide temperature range (-20 to +280C) Weighs 900g Average 4 hours battery use Testo IR PRO reporting software included 2 year warranty Testo 875-2 Thermal Imaging Camera kit includes: Testo 875-2 Thermal Imager Testo 875-2 Transit case 2GB SD data storage Testo IR software USB cable Li-on battery Mains adaptor     Electrical Applications http://www.pat-services.co.uk/testo-875-2-thermal-imager-1539.htm http://www.pat-services.co.uk/testo-875-1-thermal-imager-1537.htm Designed for surveying buildings, HVAC, electrical item maintenance and production lines, the Testo 875-1 incorporates two thermal imagers into one.All objects above zero degrees Fahrenheit (about 273C) emit infrared radiation that cannot be seen by the human eye. The Testo 875-1 Infrared Camera converts this radiation into electrical signals which are used to create a thermal image on screen. Old methods of detecting electrical faults or weaknesses in buildings/industrial areas involve taking things to pieces or a lot of time consuming searching. A Testo 875 Thermal Imager allows you to non-intrusively check production lines, pipelines, energy loss and a lot more with minimal downtime and cost to you or your customer.Many people use the Testo 875 Thermal Imaging Camera for preventative maintenance. This means finding problems before they turn into large costs or problems e.g. poor insulation or superheating electrical items.An 80 mK thermal sensitivity allows the Testo 875-1 Thermal Imager to find even the smallest change in temperature. Additional accessories include sun shied, tripods and much more. All Testo 875 Infrared Cameras include: Testo IR Pro Software - For analysing and creation of professional reports. Soft carry case - Keep your thermal imager safe when on site. Easy-to-use menu system - Simple menu setup with one hand focus trigger.Testo 875-1 Testo 875-1 Thermal Imaging Camera key features:Quality image results - See even the smallest change in temperature with the Testo 875 Thermal Imagers fantastic 80 mK thermal sensitivity.Find damp/mould risk areas - The Testo 875-1 Thermal Imager can easily find areas at risk of mould and display it on screen. Simply enter the ambient room temperature and air humidity into the camera to automatically calculate the dewpoint.Auto hot and cold spot detection - Automatic spot recognition allows you to see vital temperature recordings on the screen. This means you can work more efficiently, diagnosing problems on the spot and saving money.Building Thermography uses -- Verify heating systems and industrial installations- Find damaged piping- Detect building errors and check new constructions- Prevent growth of mould and dampness- Uncover roof leaksIndustrial Thermography uses -- Checks for the upkeep of electrical objects- Preventative maintenance- Accurate quality assurance and production monitoring- Recording of filling levels- Detecting dangerous temperature readings- Ensuring accurate power generation- Avoiding fire/breakdown from super-heating circuits Testo 875-1 Thermal Imaging Camera specification: High-quality wide-angle lens 32 with F1-optic (provides a wider viewing field) Minimum focus distance 10cm Detector 160 x 120 pixels, interpolating to 320 x 240 pixels Hi-res 3.5" LCD Display NETD < 0,08C (80mK thermal sensitivity) Refresh frequency 9 Hz Auto hot/cold spot detection on screen Focusing by hand 2GB SD memory card (approximately 800 - 1000 images) Adjustable emissivity Wide temperature range (-20 to +280C) Weighs 900g Average 4 hours battery use Testo IR PRO reporting software included 2 year warranty Testo 875-1 Thermal Imaging Camera kit includes: Testo 875-1 Thermal Imager Testo 875-1 Transit case 2GB SD data storage Testo IR software USB cable Li-on battery Mains adaptor   Building Applications http://www.pat-services.co.uk/testo-875-1-thermal-imager-1537.htm http://www.pat-services.co.uk/wmmic-microwave-radiation-leakage-labels-1535.htm Roll of 100 x Microwave Leakage Labels Used in conjunction with a Microwave Leakage Detector, these radiation leakage labels show the details of the microwave oven that has been tested. Testing microwave ovens is now a requirement of your PAT Testing routine. Dimensions measure: 66mm wide x 33mm high. Writable fields on Microwave Leakage Labels Emission level Interlock checked Test date Tested by Retest due Equipment/Appliance ID Fuse Amp rating PAT Testing Labels, Stickers and Tags http://www.pat-services.co.uk/wmmic-microwave-radiation-leakage-labels-1535.htm http://www.pat-services.co.uk/megger-pat350-pat-kit-3-1533.htm The Ultimate PAT Testing starter kit with data entry software for producing great results!  Includes a Microwave Leakage Detector to comply with new IEE regulations.Megger PAT350 PAT Tester Kit 3 with Microwave Leakage Detector comes supplied with: Microwave Leakage Detector SimplyPATS Manual V6 Software The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 500 Failed Labels 500 Cable Wraps 240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results)Megger PAT350 also comes supplied with: Megger PAT350 PAT Tester Megger PAT350 carry case Flash test probe Combined earth-bond and insulation test lead Adaptor for testing extension leadsThe new Megger PAT350 PAT Tester is one of two new Portable Appliance Testers from Meggers PAT 300 range.This portable PAT Tester is ideal for testing all electrical equipment to meet Health and Safety regulations. The Megger PAT350 PAT Tester is a fully featured tester with dedicated test buttons for direct access to tests.The Megger PAT350 can test a full range of electrical items including Class I, Class II, IEC Power Leads, Extension Leads and full tests for portable RCDs. It also has the ability to carry out Flash Tests. An automatic mode is available for Class I and Class II testing. In automatic mode, the tests proceed sequentially through bond, insulation and operation, indicating a pass or fail at each test.If a fail occurs, the Megger PAT350 stops testing. When manual testing, each test is preceded by a selection screen where the test parameters are selected, such as bond test current, insulation test voltage or leakage test type. These diagnostic buttons provide direct access to any test individually, allowing single tests to be performed following repair or a suspect result.Megger PAT350 PAT Tester key features: Flash test Simple manual or automatic testing 230 V and 110 V operation Bond testing at 25 A,10 A and 200 mA Differential, touch and substitute leakage testing Full colour display Tests portable RCDs and extension leadsMegger PAT350 comes supplied with: Megger PAT350 PAT Tester Megger PAT350 carry case Flash test probe Combined earth-bond and insulation test lead Adaptor for testing extension leadsAlso available in this range is the Megger PAT320. This has all of the same feature of the PAT350 only without the added capability of Flash Test.Calibration is NOT included. Megger PAT350 Kits http://www.pat-services.co.uk/megger-pat350-pat-kit-3-1533.htm http://www.pat-services.co.uk/megger-pat350-pat-kit-2-1531.htm An excellent PAT Testing starter kit with data entry software for producing great results!Megger PAT350 PAT Tester Kit 2 with Software comes supplied with: SimplyPATS Manual V6 Software The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 500 Failed Labels 500 Cable Wraps 240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results)Megger PAT350 also comes supplied with: Megger PAT350 PAT Tester Megger PAT350 carry case Flash test probe Combined earth-bond and insulation test lead Adaptor for testing extension leadsThe new Megger PAT350 PAT Tester is one of two new Portable Appliance Testers from Meggers PAT 300 range.This portable PAT Tester is ideal for testing all electrical equipment to meet Health and Safety regulations. The Megger PAT350 PAT Tester is a fully featured tester with dedicated test buttons for direct access to tests.The Megger PAT350 can test a full range of electrical items including Class I, Class II, IEC Power Leads, Extension Leads and full tests for portable RCDs. It also has the ability to carry out Flash Tests. An automatic mode is available for Class I and Class II testing. In automatic mode, the tests proceed sequentially through bond, insulation and operation, indicating a pass or fail at each test.If a fail occurs, the Megger PAT350 stops testing. When manual testing, each test is preceded by a selection screen where the test parameters are selected, such as bond test current, insulation test voltage or leakage test type. These diagnostic buttons provide direct access to any test individually, allowing single tests to be performed following repair or a suspect result.Megger PAT350 PAT Tester key features: Flash test Simple manual or automatic testing 230 V and 110 V operation Bond testing at 25 A,10 A and 200 mA Differential, touch and substitute leakage testing Full colour display Tests portable RCDs and extension leadsMegger PAT350 comes supplied with: Megger PAT350 PAT Tester Megger PAT350 carry case Flash test probe Combined earth-bond and insulation test lead Adaptor for testing extension leadsAlso available in this range is the Megger PAT320. This has all of the same feature of the PAT350 only without the added capability of Flash Test.Calibration is NOT included. Megger PAT350 Kits http://www.pat-services.co.uk/megger-pat350-pat-kit-2-1531.htm http://www.pat-services.co.uk/megger-pat350-pat-kit-1-1529.htm An excellent PAT Testing Starter Kit!Megger PAT350 PAT Tester Kit 1 comes supplied with: The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 500 Failed Labels 500 Cable Wraps 240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results)Megger PAT350 also comes supplied with: Megger PAT350 PAT Tester Megger PAT350 carry case Flash test probe Combined earth-bond and insulation test lead Adaptor for testing extension leadsThe new Megger PAT350 PAT Tester is one of two new Portable Appliance Testers from Meggers PAT 300 range.This portable PAT Tester is ideal for testing all electrical equipment to meet Health and Safety regulations. The Megger PAT350 PAT Tester is a fully featured tester with dedicated test buttons for direct access to tests.The Megger PAT350 can test a full range of electrical items including Class I, Class II, IEC Power Leads, Extension Leads and full tests for portable RCDs. It also has the ability to carry out Flash Tests. An automatic mode is available for Class I and Class II testing. In automatic mode, the tests proceed sequentially through bond, insulation and operation, indicating a pass or fail at each test.If a fail occurs, the Megger PAT350 stops testing. When manual testing, each test is preceded by a selection screen where the test parameters are selected, such as bond test current, insulation test voltage or leakage test type. These diagnostic buttons provide direct access to any test individually, allowing single tests to be performed following repair or a suspect result.Megger PAT350 PAT Tester key features: Flash test Simple manual or automatic testing 230 V and 110 V operation Bond testing at 25 A,10 A and 200 mA Differential, touch and substitute leakage testing Full colour display Tests portable RCDs and extension leadsMegger PAT350 comes supplied with: Megger PAT350 PAT Tester Megger PAT350 carry case Flash test probe Combined earth-bond and insulation test lead Adaptor for testing extension leadsAlso available in this range is the Megger PAT320. This has all of the same feature of the PAT350 only without the added capability of Flash Test.Calibration is NOT included. Megger PAT350 Kits http://www.pat-services.co.uk/megger-pat350-pat-kit-1-1529.htm http://www.pat-services.co.uk/megger-pat320-pat-kit-3-1527.htm The Ultimate PAT Testing starter kit with data entry software for producing great results!  Includes a Microwave Leakage Detector to comply with new IEE regulations.Megger PAT320 PAT Tester Kit 3 with Microwave Leakage Detector comes supplied with: Microwave Leakage Detector SimplyPATS Manual V6 Software The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 500 Failed Labels 500 Cable Wraps 240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results)Megger PAT320 also comes supplied with: Megger PAT320 PAT Tester Megger PAT320 carry case Combined earth-bond and insulation test lead Adaptor for testing extension leadsThe new Megger PAT320 PAT Tester is one of two new Portable Appliance Testers from Meggers PAT 300 range.This portable PAT Tester is ideal for testing all electrical equipment to meet Health and Safety regulations. The Megger PAT320 PAT Tester is a fully featured tester with dedicated test buttons for direct access to tests.The Megger PAT320 can test a full range of electrical items including Class I, Class II, IEC Power Leads, Extension Leads and full tests for portable RCDs. An automatic mode is available for Class I and Class II testing. In automatic mode, the tests proceed sequentially through bond, insulation and operation, indicating a pass or fail at each test.If a fail occurs, the Megger PAT320 stops testing. When manual testing, each test is preceded by a selection screen where the test parameters are selected, such as bond test current, insulation test voltage or leakage test type. These diagnostic buttons provide direct access to any test individually, allowing single tests to be performed following repair or a suspect result.Megger PAT320 PAT Tester key features: Simple manual or automatic testing 230 V and 110 V operation Bond testing at 25 A,10 A and 200 mA Differential, touch and substitute leakage testing Full colour display Tests portable RCDs and extension leadsAlso available in this range is the Megger PAT350. This has all of the same feature of the PAT320 only with the added capability of Flash Test.Calibration is NOT included. Megger PAT320 Kits http://www.pat-services.co.uk/megger-pat320-pat-kit-3-1527.htm http://www.pat-services.co.uk/megger-pat320-pat-kit-2-1525.htm An excellent PAT Testing starter kit with data entry software for producing great results!Megger PAT320 PAT Tester Kit 2 with Software comes supplied with: SimplyPATS Manual V6 Software The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 500 Failed Labels 500 Cable Wraps 240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results)Megger PAT320 also comes supplied with: Megger PAT320 PAT Tester Megger PAT320 carry case Combined earth-bond and insulation test lead Adaptor for testing extension leadsThe new Megger PAT320 PAT Tester is one of two new Portable Appliance Testers from Meggers PAT 300 range.This portable PAT Tester is ideal for testing all electrical equipment to meet Health and Safety regulations. The Megger PAT320 PAT Tester is a fully featured tester with dedicated test buttons for direct access to tests.The Megger PAT320 can test a full range of electrical items including Class I, Class II, IEC Power Leads, Extension Leads and full tests for portable RCDs. An automatic mode is available for Class I and Class II testing. In automatic mode, the tests proceed sequentially through bond, insulation and operation, indicating a pass or fail at each test.If a fail occurs, the Megger PAT320 stops testing. When manual testing, each test is preceded by a selection screen where the test parameters are selected, such as bond test current, insulation test voltage or leakage test type. These diagnostic buttons provide direct access to any test individually, allowing single tests to be performed following repair or a suspect result.Megger PAT320 PAT Tester key features: Simple manual or automatic testing 230 V and 110 V operation Bond testing at 25 A,10 A and 200 mA Differential, touch and substitute leakage testing Full colour display Tests portable RCDs and extension leadsAlso available in this range is the Megger PAT350. This has all of the same feature of the PAT320 only with the added capability of Flash Test.Calibration is NOT included. Megger PAT320 Kits http://www.pat-services.co.uk/megger-pat320-pat-kit-2-1525.htm http://www.pat-services.co.uk/megger-pat320-pat-kit-1-1523.htm An excellent PAT Testing Starter Kit!Megger PAT320 PAT Tester Kit 1 comes supplied with: The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 500 Failed Labels 500 Cable Wraps 240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results)Megger PAT320 also comes supplied with: Megger PAT320 PAT Tester Megger PAT320 carry case Combined earth-bond and insulation test lead Adaptor for testing extension leadsThe new Megger PAT320 PAT Tester is one of two new Portable Appliance Testers from Meggers PAT 300 range.This portable PAT Tester is ideal for testing all electrical equipment to meet Health and Safety regulations. The Megger PAT320 PAT Tester is a fully featured tester with dedicated test buttons for direct access to tests.The Megger PAT320 can test a full range of electrical items including Class I, Class II, IEC Power Leads, Extension Leads and full tests for portable RCDs. An automatic mode is available for Class I and Class II testing. In automatic mode, the tests proceed sequentially through bond, insulation and operation, indicating a pass or fail at each test.If a fail occurs, the Megger PAT320 stops testing. When manual testing, each test is preceded by a selection screen where the test parameters are selected, such as bond test current, insulation test voltage or leakage test type. These diagnostic buttons provide direct access to any test individually, allowing single tests to be performed following repair or a suspect result.Megger PAT320 PAT Tester key features: Simple manual or automatic testing 230 V and 110 V operation Bond testing at 25 A,10 A and 200 mA Differential, touch and substitute leakage testing Full colour display Tests portable RCDs and extension leadsAlso available in this range is the Megger PAT350. This has all of the same feature of the PAT320 only with the added capability of Flash Test.Calibration is NOT included. Megger PAT320 Kits http://www.pat-services.co.uk/megger-pat320-pat-kit-1-1523.htm http://www.pat-services.co.uk/kewtech-kt72-pat-tester-1521.htm FANTASTIC INTRODUCTORY OFFER - ONLY 305+VAT!Kewtech KT72 PAT Tester with auto test sequencesThe Kewtech KT72 is the latest in Kewtech's expanding PAT Tester range.  This brand new tester follows in the footsteps of the Kewtech KT71 but has the added advantage of being battery powered. This means that the Kewtech KT72 PAT Tester is feature packed and completely flexible, allowing for speedy PAT Testing.A great feature of the Kewtech KT72 PAT Tester is the easy to use Earth Bond Test system. Simply test your appliance and one of the three colour LEDS will light up to show a PASS or FAIL:Green: All appliances PASSAmber: Appliances with long mains leads and extension leads PASSRed: Earth Continuity greater than 0.2 ohm FAILKewtech KT72 PAT Tester features: Performs Earth bond at 200mA at both +ve and -ve polarities (IT appliance safe) 250V / 500V insulation test voltages Substitute leakage tests Single rotary dial position initiates test sequence Class I IT 200mA Earth Bond Class II Extension lead test including polarity LED indication of pass / fail as well as a result display Automatic check if appliance is switched on or not Test 110V appliances for earth bond and insulation (with appropriate test adaptor) Tests in accordance with the IEE Code of Practice Powered by batteriesKewtech KT72 PAT Tester comes supplied with: Kewtech KT72 PAT Tester Kewtech KT72 Instruction Manual Mains Leads Earth Bond Lead Extension Lead AdaptorCalibration is included FREE. Kewtech PAT Testers http://www.pat-services.co.uk/kewtech-kt72-pat-tester-1521.htm http://www.pat-services.co.uk/kewtech-8035-phase-rotation-indicator-1519.htm Kewtech Kyoritsu 8035 Phase Rotation IndicatorThis is a new non-contact safety Phase Indicator from Kewtech and it is packed full of great features. It is ideal for checking motor rotation.Kewtech Kyoritsu 8035 Phase Rotation Indicator features New technology permits safe testing, without the need of direct contact between probes and live wires The insulated crocodile clips can clip insulated cables from φ2.4 to 30mm Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones The instrument can be fixed to a metal panel via the magnet on the back side Wide measuring range for 3 phase installations from 70V to 1000V AC Super brightness function permits clear LED's indication also in sunshine Complies with IEC 61010-1 CAT IV 600V and CAT III 1000VKewtech Kyoritsu 8035 Phase Rotation Indicator specification Functions: Phase rotation (Clockwise or Counter Clockwise), Presence of open phase Detection method: Electrostatic induction Measuring voltage range: From 70 to 1000V AC phase to phase (sine wave, continuous input) Clamp diameter range: From φ2.4 to 30mm insulated cables Measuring frequency range: 45 to 66Hz Phase rotation:- Clockwise: Green arrow LEDs "rotate" in clockwise, Green symbol "CW" lits, Intermittent buzzer- Counter Clockwise: Red arrow LEDs "rotate" in counter clockwise, Red symbol "CCW" lits, continuous buzzer Visual indication: Via LEDs with Super brightness function Battery voltage warning: Power LED blinks if battery voltage is too low Operating conditions: Temperature/Humidity Ranges -10 to 50C, 80% (no condensation) Storage conditions: Temperature/Humidity Ranges -20 to 60C, 80% (no condensation) Applicable standards: IEC 61010-1 CAT.IV 600V, CAT.III 1000V Pollution degree2, IEC 61326-1, IEC 61557-1, -7 Power supply: Alkaline battery (Continuous use: Approx. 100 hours) Dimensions: 112(L) 61(W) 36(D) mm Weight: 380g Test leads: Double insulated cables, length approx. 70cm Colours code: L1(U), RedL2(V), WhiteL3(W), BlueKewtech Kyoritsu 8035 Phase Rotation Indicator kit includes Kewtech Kyoritsu 8035 Phase Rotation Tester Kewtech Kyoritsu 8035 carrying case Kewtech Kyoritsu 8035 instruction manual Double insulated cables 4x Alkaline battery Fuse Finders / Cable Locators http://www.pat-services.co.uk/kewtech-8035-phase-rotation-indicator-1519.htm http://www.pat-services.co.uk/fluke-1651b-multifunction-installation-tester-1515.htm Fluke 1651B Multifunction Installation Tester - The everyday tester, for every electrical installerThis everyday Multifunction Tester ideal for domestic use and covers all the basic needs for testing to the 17th Edition Wiring Regulations and Part P of the Building Regulations. The Fluke 1651B Multifunction Installation Tester can ensure that fixed wiring is safe and correctly installed to meet the requirements of IEC 60364, HD 384 and all relevant local standards.Fluke 1651B Multifunction Installation Tester is FAST Two measurements at once and a dual display. PEFC/PSC and loop impedance are measured and displayed in parallel, saves you more than 50% of test time compared to other loop testers Additional new high current loop mode. Faster measurements compared to loop tests with non-trip mode for RCDs Unique zero adapter for fast, always reliable and accurate test lead and mains cord compensation Fast voltage measurement between L-N, L-PE and N-PE using the mains cord. No need to change measurement connectionsFluke 1651B Multifunction Installation Tester is SAFE Earth Volt Touchpad detects raised earth voltages >50 V, indicating potential dangerous situations Standard supplied with fused test leads to comply with GS38Fluke 1651B Multifunction Installation Tester is EASY Rotary dial knob indicates clear which function is selected, all functionalities on one spot and no complex multi level menus Large display with backlight, clear symbols and with exceptionally wide viewing angle for easy and safe readings PASS/FAIL indication for RCD test results Variable RCD current mode for customized settingsFluke 1651B Multifunction Installation Tester is RUGGED Withstands a drop of 1 meter Compact, lightweight (less than 1.2 kg) and padded neck-strap to free your hands for all day testingFluke 1651B Multifunction Installation Tester key features: Fast high current loop test Variable RCD current mode for customized settings PASS/FAIL indication for RCD tests 250 V insulation test voltage (250 V, 500 V and 1000 V) Select voltage measurement between L-N, L-PE and N-PE Zero adaptor for easy test lead compensation, available as new accessory and also included with standard scope of supplyFluke 1651B Multifunction Installation Tester kit includes: Fluke 1651B Multifunction Installation Tester Fluke 1651B Quick reference guide Fluke 1651B Users manual on CD-ROM 6 AA Cell batteries C1600 Hard carrying case Zero adaptor Mains test lead TL165X/UK fused test lead set Padded carrying strapCalibration certificate is included. Installation Testers http://www.pat-services.co.uk/fluke-1651b-multifunction-installation-tester-1515.htm http://www.pat-services.co.uk/fluke-td16-observation-recommendation-sheet-1513.htm Fluke TD16 Observation/Recommendation SheetThis is used in conjunction with Periodic Inspection Report (Fluke TD03.) Certificates and Documentation http://www.pat-services.co.uk/fluke-td16-observation-recommendation-sheet-1513.htm http://www.pat-services.co.uk/fluke-td04-schedules-of-inspection-1511.htm Fluke TD04 Schedules of Inspection and Circuit Details/Test ResultsA single-sided version for up to 15 way boards.Fluke TD04 Schedules of Inspection and Circuit Details/Test Results usesSupports Fluke TD01, Fluke TD03 and can also be used in conjuction with Fluke TD16. Certificates and Documentation http://www.pat-services.co.uk/fluke-td04-schedules-of-inspection-1511.htm http://www.pat-services.co.uk/fluke-td05f-schedules-of-inspection-1509.htm Fluke TD05F Schedules of Inspection and Circuit Details/Test ResultsFor consumer units and/or distribution boards with up to 12 ways. To accompany Fluke TD01F or Fluke TD03F.Fluke TD05F Schedules of Inspection and Circuit Details/Test Results specificationBased on the model form in BS 7671:2008 (IEE Wiring Regulations 17th Edition) Certificates and Documentation http://www.pat-services.co.uk/fluke-td05f-schedules-of-inspection-1509.htm http://www.pat-services.co.uk/fluke-td06-schedules-of-inspection-1507.htm Fluke TD06 Schedules of Inspection and Circuit Details/Test ResultsFor consumer units and/or distribution boards with up to 36 ways.Fluke TD06 Schedules of Inspection and Circuit Details/Test Results specificationBased on the model form in BS 7671:2001 (2004) (IEE Wiring Regulations 16th Edition) Certificates and Documentation http://www.pat-services.co.uk/fluke-td06-schedules-of-inspection-1507.htm http://www.pat-services.co.uk/fluke-td07f-part-p-certificate-1505.htm BUY ONE GET ONE FREE!Fluke TD07F Part P Certificate - Domestic Electrical Installation CertificateFor certifying an installation in a single dwelling designed, constructed and inspected and tested by one person.Fluke TD07F Part P Certificate specificationBased on the model form in BS 7671:2008 (IEE Wiring Regulations 17th Edition) Certificates and Documentation http://www.pat-services.co.uk/fluke-td07f-part-p-certificate-1505.htm http://www.pat-services.co.uk/kewtechnik-kablekwik-cable-installation-tool-1503.htm Kew Technik KableKwik Cable Installation ToolPush and pull cable under floors/carpets, in cavities, voids and over ceilings.Use KableKwik Cable Installation Tool - the high quality installation tool to: Reduce cost - minimise damage to worksite Reduce frustration - neater finish with access to more areas Reduce cost - Less overstretching and reduced ladder workKableKwik Cable Installation Tool features: 10 x 1000m rods 100% tested, 80kg pull strength Cable Tools http://www.pat-services.co.uk/kewtechnik-kablekwik-cable-installation-tool-1503.htm http://www.pat-services.co.uk/metrel-alphatek-tek-255-multimeter-1501.htm Metrel Alphatek TEK 255 Digital Multimeter pocket sized.Compliant to EN61010 LVD CAT II 600V, continuity buzzer, rugged design in a rubber housing, 0 600V AC +/- 1.2% of RDG + 10.Metrel Alphatek TEK 255 Digital Multimeter features: Rugged design in a rubber housing Compliant with EN61010 LVD CAT II 600V 200mV 600V DC +/- 0.5% of RDG + 2 0 600V AC +/- 1.2% of RDG + 10 Continuity buzzer Temperature Range 20C to 1000C Diode test Overload protection Polarity indication 1999 count Transistor test Resistance range 0 200 ohms 2Mohms +/- 0.8 or RDG + 3 Built in stand Data holdMetrel Alphatek TEK 255 Digital Multimeter kit includes: Metrel Alphatek TEK255 Digital Multimeter Temperature probes Test leads Digital Multimeters http://www.pat-services.co.uk/metrel-alphatek-tek-255-multimeter-1501.htm http://www.pat-services.co.uk/martindale-hpat500-pattester-kit-1-1499.htm An excellent PAT Testing Starter Kit!Martindale HPAT500 PAT Tester Kit 1 includes: Martindale HPAT500 PAT Tester The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 500 Failed Labels 500 Cable Wraps 240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results) Deluxe Carry Case for easy transportation and protection of your PAT Testing Kit!  Comes with customisable foam, so you can snugly fit whatever equipment you would like to take on siteMartindale HandyPAT HPAT500 PAT Tester is supplied with: Martindale HandyPAT HPAT 500 PAT Tester HPAT 500 HandyPAT Carry Case HPAT 500 HandyPAT Manual Earth Bond Lead Mains Lead and Car Charger 6 Rechargeable Batteries Crocodile Clip KeyringMartindale HPAT500 Handy PAT information The Martindale HandyPAT HPAT500 is a fantastic little PAT Tester for all of the low volume users who record tests manually. Safe for testing IT equipment the Martindale HandyPAT carries out a 200mA earth bond test and also has a built in extension and IEC lead socket.A new addition to the hand-held PAT Tester range which is ideal for use where there is no convenient power socket.  It's easy to use and reliable, with a simple one button, one test sequence selection.  The Martindale HPAT500 HandyPAT PAT Tester displays measured values as well a "pass" or "fail" decision and comes complete with a mains charger.Martindale HandyPAT HPAT500 PAT Tester features: Class I, Class II and power lead tests Insulation Test at 500V 200mA DC continuity test, with two pass levels Fixed pass levels Displays measured values and PASS or FAIL resultMartindale HandyPAT HPAT500 PAT Tester specification: Size: 90 x 210x 54mm Weight: Approx 700gCalibration is NOT included. Martindale HPAT500 Kits http://www.pat-services.co.uk/martindale-hpat500-pattester-kit-1-1499.htm http://www.pat-services.co.uk/martindale-hpat500-handypat-pat-tester-1497.htm Martindale HandyPAT HPAT500 PAT TesterThe Martindale HandyPAT HPAT500 is a fantastic little PAT Tester for all of the low volume users who record tests manually. Safe for testing IT equipment the Martindale HandyPAT carries out a 200mA earth bond test and also has a built in extension and IEC lead socket.A new addition to the hand-held PAT Tester range which is ideal for use where there is no convenient power socket.  It's easy to use and reliable, with a simple one button, one test sequence selection.  The Martindale HPAT500 HandyPAT PAT Tester displays measured values as well a "pass" or "fail" decision and comes complete with a mains charger.Martindale HandyPAT HPAT500 PAT Tester features: Class I, Class II and power lead tests Insulation Test at 500V 200mA DC continuity test, with two pass levels Fixed pass levels Displays measured values and PASS or FAIL resultMartindale HandyPAT HPAT500 PAT Tester specification: Size: 90 x 210x 54mm Weight: Approx 700gMartindale HandyPAT HPAT500 PAT Tester is supplied with: Martindale HandyPAT HPAT 500 PAT Tester HPAT 500 HandyPAT Carry Case HPAT 500 HandyPAT Manual Earth Bond Lead Mains Lead and Car Charger 6 Rechargeable Insitu Batteries Crocodile Clip KeyringCalibration is NOT included. Budget PAT Testers http://www.pat-services.co.uk/martindale-hpat500-handypat-pat-tester-1497.htm http://www.pat-services.co.uk/fluke-233-remote-digital-multimeter-1495.htm The NEW Fluke 233 True RMS Remote Display Digital Multimeter allows you to be in two places at once.The Fluke 233 Digital Multimeter has a removable display gives the user ultimate flexibility in unusual measurement scenarios. Simply place the display where you can see it and then put the meter where it is convenient for youno more juggling of leads and the meter while stretching into a tight spot.Remove the dilemma of trying to take measurements in hard-to-reach places, or making measurements in machines or panels that are physically separated from a limit or isolator switch. Use the Fluke 233 Remote Display Digital Multimeter in areas where the operator cant be close to the active measurement point, like clean rooms or hazardous areas.Fluke 233 True RMS Remote Display Digital Multimeter specification: True-RMS ac voltage and current for accurate measurements on non-linear signals Measure up to 1000 V ac and dc Measure up to 10 A (20 A for 30 seconds) 10,000 μF capacitance range Frequency to 50 kHz Built in thermometer No need to carry extra equipment Resistance, continuity and diode testFluke 233 True RMS Remote Display Digital Multimeter features: Low power wireless technology allows the Fluke 233 display to be carried up to 10 meters (33 ft) The removable magnetic display can be conveniently mounted where it is easily seen Make measurements without holding the meter to improve visual focus on probes Use as a conventional digital multimeter when the display is connected Radio transmitter automatically turns off when the display is connected to the meter Min/Max and Average functions Large digit LCD display with bright backlight Approx 400 hours battery life Auto power offFluke 233 True RMS Remote Display Digital Multimeter safety rating: CAT IV 600 V CAT III 1000 VFluke 233 True RMS Remote Display Digital Multimeter kit includes: Fluke 233 RMS Digital Multimeter Fluke 233 manual Fluke 233 manual and related products CD-ROM Temperature probe Test leads Alligator clips AA batteries Digital Multimeters http://www.pat-services.co.uk/fluke-233-remote-digital-multimeter-1495.htm http://www.pat-services.co.uk/flir-t425-thermal-imaging-camera-1493.htm The New FLIR T425 Thermal Imaging Camera makes high-end infrared affordable to the wide professional audienceThe FLIR T425 Thermal Imager is an innovative, feature rich infrared camera equipped with FLIR's Thermal Fusion technology.FLIR T425 Thermal Imager with Thermal Fusion Technology The Thermal Fusion functionality allows for easier identification and interpretation of infrared images. This advanced technology enhances the value of an infrared image by allowing you to overlay it directly over the corresponding visible image. The functionality combines the benefits of both the infrared image and visual picture at the push of a button. The FLIR T425 Thermal Imaging Camera does this in real time and the overlay function can be easily adjusted to suit any application such as electrical surveys, building diagnostics, and mechanical inspections.Applications for the FLIR T425 Thermal ImagerThe latest FLIR T425 IR Camera is designed to tackle the performance demands of industrial, plant, and utility professionals responsible for effective electrical / mechanical inspections and MRO. With an attractive price / performance ratio, the T425 Thermal Imaging Camera makes high-end IR available as an important tool to increase productivity for professional user.Easy to use for quick, accurate diagnosticsThe T425 Thermal Imaging Camera belongs to the FLIR T Series of powerful, simple-to-use, and durable IR cameras, and has a 320 x 240 focal plane array detector (76,800 pixels). This new camera stands out from the competition with a combination of versatile and sophisticated features only found on FLIR cameras. For quick, highly detailed diagnostics in industrial applications, the T425 Thermal Imager matches 2 % thermal accuracy and < 0.05 C thermal sensitivity (NETD) with an insulation and humidity alarm.Flexible functions and unique featuresTo tailor temperature readings to a user's specific needs, the FLIR T425 Thermal Imaging Camera offers measurement modes over and above center-spot readings: 5 spot meters, 5 box areas, isotherm color alarms and automatic hot/cold spot. Text annotation connects voice comments with images, even on reports.FLIR T425 Thermal Imaging Camera features:Imaging and optical data Optics head and display screen are independently rotatable for optimum viewing (Field of view: 25 x 19) Lens: 25 (and interchangeable optics) Focal Plane array (FPA), uncooled microbolometer, 320 x 240 pixels Thermal sensitivity (NETD): 50 mK (0.05C at 30C) Focus: Manual/automatic 18 continuous, digital zoom, including panning Spectral range: 7.5 to 13m Built-in LaserLocatIRImage presentation Large 3.5" colour touch screen LCD Onscreen thumbnail image gallery Image modes: IR image, visual image, thermal fusion, MPEG 4 video Thermal fusion IR image shown within temp interval on visual image Picture-in-Picture: Resizable and movable IR area on visual image NEW IR Window Correction - When inspecting high voltage through safety IR windows this software corrects the image and severely improves quality.Measurement Temperature range: -20 C to +1200C (-4F to + 2192F) Accuracy 2CMeasurement analysis 5 spot meters Area: 5 box areas with max/min/average Isotherm: Detect high/low temperature/interval Delta temperature between measurement functions or reference temperature (automatic calculation of temperature difference between two measurement tools) Audible/visual alarm (above/below) on spotmeter, box or difference temperature Difference temperature alarm, audible NEW MeterLink - New technology allowing you to wirelessly connect FLIR infrared cameras to Bluetooth Extech meters (e.g. Extech EX8451000 ACA Clamp Meter) This data is instantly imprinted onto the thermal image. NEW Instant Report - Create a one page PDF report on site with IR/visual, text comments and object parameters through your camera. Copy to USB or PC and share with a customer.Set-up Colour palettes: BW, BW inv, iron, rain, rainHC, blueredStorage of images Image storage: Removable SD-card (1000 images), MPEG-4 non-radiometric video Periodic image storage every 10 seconds up to 24 hours Panorama image support in FLIR BuildIR software (not included) NEW Image frequency: 30Hz / 9Hz NEW Copy to USB - Copy results to USB for quick data transfer.Digital camera 3.1 megapixel (2048 x 1536 pixels) with flashImage annotations NEW Bluetooth Voice Annotation - Make wireless comments in connection to the thermal images as you make an inspection. Text from predefined list or soft keyboard on touch screen Image marker: 4 on IR or visual image Sketch from touch screenPhysical data Holster for portability and easy access to camera Interface: USB, file transfer to/from PC Long 4-Hour battery with in-camera charging or car charger Dimensions: 106 x 201 x 125 mm Weight: 880gSoftware Includes FLIR QuickReport Software for analysis and reporting Compatible with Optional Microsoft Word-Based ThermaCAM Reporter Software w/spell CheckFLIR T425 Thermal Imaging Camera kit includes: FLIR T425 Thermal Imager Camera FLIR QuickReport software FLIR T425 Transport case FLIR T425 Storage case SD memory card Rechargeable battery AC adaptor/charger 2-bay battery charger Power supply Power cord Sun shield Headset USB and video cables Stylus pen Lens cap FLIR T425 User documentation CD-ROM (21 languages) Getting started guideCall us on 0800 247 1600 to discuss a wide range of lenses, software, and accessories for the T Series!Other Flir Thermal Imaging Cameras:Flir i5, Flir i7, Flir InfraCam SD, Flir BCam SD, Flir b40, Flir b50, Flir b60, Flir i40, Flir i50, Flir i60, Flir T200, Flir T250, Flir T335, Flir T360, Flir T365, Flir B200, Flir B250, Flir B335, Flir B360, Flir B365, Flir B425Click here for Thermal Imaging (Imager) Camera information. Electrical Applications http://www.pat-services.co.uk/flir-t425-thermal-imaging-camera-1493.htm http://www.pat-services.co.uk/flir-b425-thermal-imaging-camera-1491.htm The New FLIR B365 Thermal Imaging Camera makes high-end infrared affordable to the wide professional audienceThe FLIR B425 Thermal Imager is an innovative, feature rich infrared camera equipped with FLIR's Thermal Fusion technology.FLIR B425 Thermal Imager with Thermal Fusion Technology The Thermal Fusion functionality allows for easier identification and interpretation of infrared images. This advanced technology enhances the value of an infrared image by allowing you to overlay it directly over the corresponding visible image. The functionality combines the benefits of both the infrared image and visual picture at the push of a button. The FLIR B425 Thermal Imaging Camera does this in real time and the overlay function can be easily adjusted to suit any application such as electrical surveys, building diagnostics, and mechanical inspections.Applications for the FLIR B425 Thermal ImagerThe latest FLIR B425 IR Camera is designed to tackle the performance demands of industrial, plant, and utility professionals responsible for effective electrical / mechanical inspections and MRO. With an attractive price / performance ratio, the B425 Thermal Imaging Camera makes high-end IR available as an important tool to increase productivity for professional user.Easy to use for quick, accurate diagnosticsThe B425 Thermal Imaging Camera belongs to the FLIR B Series of powerful, simple-to-use, and durable IR cameras, and has a 320 x 240 focal plane array detector (76,800 pixels). This new camera stands out from the competition with a combination of versatile and sophisticated features only found on FLIR cameras. For quick, highly detailed diagnostics in industrial applications, the B425 Thermal Imager matches 2 % thermal accuracy and < 0.05 C thermal sensitivity (NETD) with an insulation and humidity alarm.Flexible functions and unique featuresTo tailor temperature readings to a user's specific needs, the FLIR B425 Thermal Imaging Camera offers measurement modes over and above center-spot readings: 5 spot meters, 5 box areas, isotherm color alarms and automatic hot/cold spot. Text annotation connects voice comments with images, even on reports.FLIR B425 Thermal Imaging Camera features:Imaging and optical data Optics head and display screen are independently rotatable for optimum viewing (Field of view: 25 x 19) Lens: 25 (and interchangeable optics) Focal Plane array (FPA), uncooled microbolometer, 320 x 240 pixels Thermal sensitivity (NETD): 50 mK (0.05C at 30C) Focus: Manual/automatic 18 continuous, digital zoom, including panning Spectral range: 7.5 to 13m Built-in LaserLocatIRImage presentation Large 3.5" colour touch screen LCD Onscreen thumbnail image gallery Image modes: IR image, visual image, thermal fusion, MPEG 4 video Thermal fusion IR image shown within temp interval on visual image Picture-in-Picture: Resizable and movable IR area on visual image NEW IR Window Correction - When inspecting high voltage through safety IR windows this software corrects the image and severely improves quality.Measurement Temperature range: -20 C to +350C (-4F to + 662F) Accuracy 2CMeasurement analysis Insulation Alarm: Indicates insulation performance of the building Humidity Alarm (including Dew Point Alarm): Alerts you to areas where there is a risk of condensation 5 spot meters Area: 5 box areas with max/min/average Isotherm: Detect high/low temperature/interval Delta temperature between measurement functions or reference temperature (automatic calculation of temperature difference between two measurement tools) Audible/visual alarm (above/below) on spotmeter, box or difference temperature Difference temperature alarm, audible NEW MeterLink - New technology allowing you to wirelessly connect FLIR infrared cameras to Bluetooth Extech meters (e.g. Extech InspectorPro MO297 Multi-function Moisture Meter and Psychrometer) This data is instantly imprinted onto the thermal image. NEW Instant Report - Create a one page PDF report on site with IR/visual, text comments and object parameters through your camera. Copy to USB or PC and share with a customer.Set-up Colour palettes: BW, BW inv, iron, rain, rainHC, blueredStorage of images Image storage: Removable SD-card (1000 images), MPEG-4 non-radiometric video Periodic image storage every 10 seconds up to 24 hours Panorama image support in FLIR BuildIR software (not included) NEW Image frequency: 30Hz / 9Hz NEW Copy to USB - Copy results to USB for quick data transfer.Digital camera 3.1 megapixel (2048 x 1536 pixels) with flashImage annotations NEW Bluetooth Voice Annotation - Make wireless comments in connection to the thermal images as you make an inspection. Text from predefined list or soft keyboard on touch screen Image marker: 4 on IR or visual image Sketch from touch screenPhysical data Holster for portability and easy access to camera Interface: USB, file transfer to/from PC Long 4-Hour battery with in-camera charging or car charger Dimensions: 106 x 201 x 125 mm Weight: 880gSoftware Includes FLIR QuickReport Software for analysis and reporting Compatible with Optional Microsoft Word-Based ThermaCAM Reporter Software w/spell CheckFLIR B425 Thermal Imaging Camera kit includes: FLIR B425 Thermal Imager Camera FLIR QuickReport software FLIR B425 Transport case FLIR B425 Storage case SD memory card Rechargeable battery AC adaptor/charger 2-bay battery charger Power supply Power cord Sun shield Headset USB and video cables Stylus pen Lens cap FLIR B425 User documentation CD-ROM (21 languages) Getting started guideCall us on 0800 247 1600 to discuss a wide range of lenses, software, and accessories for the B Series!Other Flir Thermal Imaging Cameras:Flir i5, Flir i7, Flir InfraCam SD, Flir BCam SD, Flir b40, Flir b50, Flir b60, Flir i40, Flir i50, Flir i60, Flir T200, Flir T250, Flir T335, Flir T360, Flir T365, Flir T425, Flir B200, Flir B250, Flir B335, Flir B360, Flir B365Click here for Thermal Imaging (Imager) Camera information. Building Applications http://www.pat-services.co.uk/flir-b425-thermal-imaging-camera-1491.htm http://www.pat-services.co.uk/flir-b365-thermal-imaging-camera-1489.htm The New FLIR B365 Thermal Imaging Camera makes high-end infrared affordable to the wide professional audienceThe FLIR B365 Thermal Imager is an innovative, feature rich infrared camera equipped with FLIR's Thermal Fusion technology.FLIR B365 Thermal Imager with Thermal Fusion Technology The Thermal Fusion functionality allows for easier identification and interpretation of infrared images. This advanced technology enhances the value of an infrared image by allowing you to overlay it directly over the corresponding visible image. The functionality combines the benefits of both the infrared image and visual picture at the push of a button. The FLIR B365 Thermal Imaging Camera does this in real time and the overlay function can be easily adjusted to suit any application such as electrical surveys, building diagnostics, and mechanical inspections.Applications for the FLIR B365 Thermal ImagerThe latest FLIR B365 IR Camera is designed to tackle the performance demands of industrial, plant, and utility professionals responsible for effective electrical / mechanical inspections and MRO. With an attractive price / performance ratio, the B365 Thermal Imaging Camera makes high-end IR available as an important tool to increase productivity for professional user.Easy to use for quick, accurate diagnosticsThe B365 Thermal Imaging Camera belongs to the FLIR B Series of powerful, simple-to-use, and durable IR cameras, and has a 320 x 240 focal plane array detector (76,800 pixels). This new camera stands out from the competition with a combination of versatile and sophisticated features only found on FLIR cameras. For quick, highly detailed diagnostics in industrial applications, the B365 Thermal Imager matches 2 % thermal accuracy and < 0.05 C thermal sensitivity (NETD) with an insulation and humidity alarm.Flexible functions and unique featuresTo tailor temperature readings to a user's specific needs, the FLIR B365 Thermal Imaging Camera offers measurement modes over and above center-spot readings: 5 spot meters, 5 box areas, isotherm color alarms and automatic hot/cold spot. Text annotation connects voice comments with images, even on reports.FLIR B365 Thermal Imaging Camera features:Imaging and optical data Optics head and display screen are independently rotatable for optimum viewing (Field of view: 25 x 19) Lens: 25 (and interchangeable optics) Focal Plane array (FPA), uncooled microbolometer, 320 x 240 pixels Thermal sensitivity (NETD): 50 mK (0.05C at 30C) Focus: Manual/automatic 14 continuous, digital zoom, including panning Spectral range: 7.5 to 13m Built-in LaserLocatIRImage presentation Large 3.5" colour touch screen LCD Onscreen thumbnail image gallery Image modes: IR image, visual image, thermal fusion Thermal fusion IR image shown within temp interval on visual image Picture-in-Picture: Scalable IR area on visual image NEW IR Window Correction - When inspecting high voltage through safety IR windows this software corrects the image and severely improves quality.Measurement Temperature range: -20 C to +120C (-4F to + 248F) Accuracy 2CMeasurement analysis Insulation Alarm: Indicates insulation performance of the building Humidity Alarm (including Dew Point Alarm): Alerts you to areas where there is a risk of condensation 5 spot meters Area: 5 box areas with max/min/average Isotherm: Detect high / low temperature/interval Delta temperature between measurement functions or reference temperature (automatic calculation of temperature difference between two measurement tools) Audible/visual alarm (above/below) on spotmeter, box or difference temperature Difference temperature alarm, audible NEW MeterLink - New technology allowing you to wirelessly connect FLIR infrared cameras to Bluetooth Extech meters (e.g. Extech InspectorPro MO297 Multi-function Moisture Meter and Psychrometer) This data is instantly imprinted onto the thermal image. NEW Instant Report - Create a one page PDF report on site with IR/visual, text comments and object parameters through your camera. Copy to USB or PC and share with a customer.Set-up Colour palettes: BW, BW inv, iron, rain Storage of images Image storage: Removable SD-card (1000 images) NEW Image frequency: 30Hz / 9Hz NEW Copy to USB - Copy results to USB for quick data transfer.Digital camera 3.1 megapixel (2048 x 1536 pixels) with flashImage annotations NEW Bluetooth Voice Annotation - Make wireless comments in connection to the thermal images as you make an inspection. Text from predefined list or soft keyboard on touch screen Image marker: 4 on IR or visual image Sketch from touch screenPhysical data Holster for portability and easy access to camera Interface: USB, file transfer to/from PC Long 4-Hour battery with in-camera charging or car charger Dimensions: 106 x 201 x 125 mm Weight: 880gSoftware Includes FLIR QuickReport Software for analysis and reporting Compatible with Optional Microsoft Word-Based ThermaCAM Reporter Software w/spell CheckFLIR B365 Thermal Imaging Camera kit includes: FLIR B365 Thermal Imager Camera FLIR QuickReport software FLIR B365 Transport case FLIR B365 Storage case SD memory card Rechargeable battery AC adaptor/charger 2-bay battery charger Power supply Power cord Sun shield Headset USB and video cables Stylus pen Lens cap FLIR B365 User documentation CD-ROM (21 languages) Getting started guideCall us on 0800 247 1600 to discuss a wide range of lenses, software, and accessories for the B Series!Other Flir Thermal Imaging Cameras:Flir i5, Flir i7, Flir InfraCam SD, Flir BCam SD, Flir b40, Flir b50, Flir b60, Flir i40, Flir i50, Flir i60, Flir T200, Flir T250, Flir T335, Flir T360, Flir T365, Flir T425, Flir B200, Flir B250, Flir B335, Flir B360, Flir B425Click here for Thermal Imaging (Imager) Camera information. Building Applications http://www.pat-services.co.uk/flir-b365-thermal-imaging-camera-1489.htm http://www.pat-services.co.uk/flir-t365-thermal-imaging-camera-1487.htm The New FLIR T365 Thermal Imaging Camera makes high-end infrared affordable to the wide professional audienceThe FLIR T365 Thermal Imager is an innovative, feature rich infrared camera equipped with FLIR's Thermal Fusion technology.FLIR T365 Thermal Imager with Thermal Fusion Technology The Thermal Fusion functionality allows for easier identification and interpretation of infrared images. This advanced technology enhances the value of an infrared image by allowing you to overlay it directly over the corresponding visible image. The functionality combines the benefits of both the infrared image and visual picture at the push of a button. The FLIR T365 Thermal Imaging Camera does this in real time and the overlay function can be easily adjusted to suit any application such as electrical surveys, building diagnostics, and mechanical inspections.Applications for the FLIR T365 Thermal ImagerThe latest FLIR T365 IR Camera is designed to tackle the performance demands of industrial, plant, and utility professionals responsible for effective electrical / mechanical inspections and MRO. With an attractive price / performance ratio, the T365 Thermal Imaging Camera makes high-end IR available as an important tool to increase productivity for professional user.Easy to use for quick, accurate diagnosticsThe T365 Thermal Imaging Camera belongs to the FLIR T Series of powerful, simple-to-use, and durable IR cameras, and has a 320 x 240 focal plane array detector (76,800 pixels). This new camera stands out from the competition with a combination of versatile and sophisticated features only found on FLIR cameras. For quick, highly detailed diagnostics in industrial applications, the T365 Thermal Imager matches 2 % thermal accuracy and < 0.05 C thermal sensitivity (NETD) with a wider temperature measurement range of - 20 C to 650 C.Flexible functions and unique featuresTo tailor temperature readings to a user's specific needs, the FLIR T365 Thermal Imaging Camera offers measurement modes over and above center-spot readings: 5 spot meters, 5 box areas, isotherm color alarms and automatic hot/cold spot. Text annotation connects voice comments with images, even on reports.FLIR T365 Thermal Imaging Camera features: Imaging and optical data Optics head and display screen are independently rotatable for optimum viewing (Field of view: 25 x 19) Lens: 25 (and interchangeable optics) Focal Plane array (FPA), uncooled microbolometer, 320 x 240 pixels Thermal sensitivity (NETD): 50 mK (0.05C at 30C) Focus: Manual/automatic 14 continuous, digital zoom, including panning Spectral range: 7.5 to 13m Built-in LaserLocatIRImage presentation Large 3.5" colour touch screen LCD Onscreen thumbnail image gallery Image modes: IR image, visual image, thermal fusion Thermal fusion IR image shown within temp interval on visual image Picture-in-Picture: Scalable IR area on visual image NEW IR Window Correction - When inspecting high voltage through safety IR windows this software corrects the image and severely improves quality.Measurement Wide temperature range: -20 C to +650C (-4F to + 1202F) Accuracy 2CMeasurement analysis 5 spot meters Area: 5 box areas with max/min/average Isotherm: Detect high / low temperature/interval Delta temperature between measurement functions or reference temperature (automatic calculation of temperature difference between two measurement tools) Audible/visual alarm (above/below) on spotmeter, box or difference temperature Difference temperature alarm, audible NEW MeterLink - New technology allowing you to wirelessly connect FLIR infrared cameras to Bluetooth Extech meters (e.g. Extech EX8451000 ACA Clamp Meter) This data is instantly imprinted onto the thermal image. NEW Instant Report - Create a one page PDF report on site with IR/visual, text comments and object parameters through your camera. Copy to USB or PC and share with a customer.Set-up Colour palettes: BW, BW inv, iron, rain Storage of images Image storage: Removable SD-card (1000 images) NEW Image frequency: 30Hz / 9Hz NEW Copy to USB - Copy results to USB for quick data transfer.Digital camera 3.1 megapixel (2048 x 1536 pixels) with flashImage annotations NEW Bluetooth Voice Annotation - Make wireless comments in connection to the thermal images as you make an inspection. Text from predefined list or soft keyboard on touch screen Image marker: 4 on IR or visual image Sketch from touch screenPhysical data Holster for portability and easy access to camera Interface: USB, file transfer to/from PC Long 4-Hour battery with in-camera charging or car charger Dimensions: 106 x 201 x 125 mm Weight: 880gSoftware Includes FLIR QuickReport Software for analysis and reporting Compatible with Optional Microsoft Word-Based ThermaCAM Reporter Software w/spell CheckFLIR T365 Thermal Imaging Camera kit includes: FLIR T365 Thermal Imager Camera FLIR QuickReport software FLIR T365 Transport case FLIR T365 Storage case SD memory card Rechargeable battery AC adaptor/charger 2-bay battery charger Power supply Power cord Sun shield Headset USB and video cables Stylus pen Lens cap FLIR T365 User documentation CD-ROM (21 languages) Getting started guideCall us on 0800 247 1600 to discuss a wide range of lenses, software, and accessories for the T Series!Other Flir Thermal Imaging Cameras:Flir i5, Flir i7, Flir InfraCam SD, Flir BCam SD, Flir b40, Flir b50, Flir b60, Flir i40, Flir i50, Flir i60, Flir T200, Flir T250, Flir T335, Flir T360, Flir T425, Flir B200, Flir B250, Flir B335, Flir B360, Flir B365, Flir B425Click here for Thermal Imaging (Imager) Camera information. Electrical Applications http://www.pat-services.co.uk/flir-t365-thermal-imaging-camera-1487.htm http://www.pat-services.co.uk/flir-t335-thermal-imaging-camera-1485.htm The New FLIR T335 Thermal Imaging Camera makes high-end infrared affordable to the wide professional audienceThe FLIR T335 Thermal Imager is an innovative, feature rich infrared camera equipped with FLIR's Thermal Fusion technology.FLIR T335 Thermal Imager with Thermal Fusion Technology The Thermal Fusion functionality allows for easier identification and interpretation of infrared images. This advanced technology enhances the value of an infrared image by allowing you to overlay it directly over the corresponding visible image. The functionality combines the benefits of both the infrared image and visual picture at the push of a button. The FLIR T335 Thermal Imaging Camera does this in real time and the overlay function can be easily adjusted to suit any application such as electrical surveys, building diagnostics, and mechanical inspections.Applications for the FLIR T335 Thermal ImagerThe latest FLIR T335 IR Camera is designed to tackle the performance demands of industrial, plant, and utility professionals responsible for effective electrical / mechanical inspections and MRO. With an attractive price / performance ratio, the T335 Thermal Imaging Camera makes high-end IR available as an important tool to increase productivity for professional user.Easy to use for quick, accurate diagnosticsThe T335 Thermal Imaging Camera belongs to the FLIR T Series of powerful, simple-to-use, and durable IR cameras, and has a 320 x 240 focal plane array detector (76,800 pixels). This new camera stands out from the competition with a combination of versatile and sophisticated features only found on FLIR cameras. For quick, highly detailed diagnostics in industrial applications, the T335 Thermal Imager matches 2 % thermal accuracy and < 0.05 C thermal sensitivity (NETD) with a wider temperature measurement range of - 20 C to 650 C.Flexible functions and unique featuresTo tailor temperature readings to a user's specific needs, the FLIR T335 Thermal Imaging Camera offers measurement modes over and above center-spot readings: 5 spot meters, 5 box areas, isotherm color alarms and automatic hot/cold spot. Text annotation connects voice comments with images, even on reports.FLIR T335 Thermal Imaging Camera features: Imaging and optical data Optics head and display screen are independently rotatable for optimum viewing (Field of view: 25 x 19) Lens: 25 (and interchangeable optics) Focal Plane array (FPA), uncooled microbolometer, 320 x 240 pixels Thermal sensitivity (NETD): 50 mK (0.05C at 30C) Focus: Manual/automatic Spectral range: 7.5 to 13m Built-in LaserLocatIRImage presentation Large 3.5" colour touch screen LCD Onscreen thumbnail image gallery Image modes: IR image, visual image Picture-in-Picture: Scalable IR area on visual image NEW IR Window Correction - When inspecting high voltage through safety IR windows this software corrects the image and severely improves quality.Measurement Wide temperature range: -20 C to +650C (-4F to + 1202F) Accuracy 2CMeasurement analysis 5 spot meters Area: 5 box areas with max/min/average Isotherm: Detect high / low temperature/interval NEW MeterLink - New technology allowing you to wirelessly connect FLIR infrared cameras to Bluetooth Extech meters (e.g. Extech EX8451000 ACA Clamp Meter) This data is instantly imprinted onto the thermal image.Set-up Colour palettes: BW, BW inv, iron, rain Storage of images Image storage: Removable SD-card (1000 images) Image frequency: 9Hz NEW Copy to USB - Copy results to USB for quick data transfer.Digital camera 3.1 megapixel (2048 x 1536 pixels) with flash NEW Zoom 2xImage annotations Voice 60 seconds Text from predefined list or soft keyboard on touch screenPhysical data Holster for portability and easy access to camera Interface: USB, file transfer to/from PC Long 4-Hour battery with in-camera charging or car charger Dimensions: 106 x 201 x 125 mm Weight: 880gSoftware Includes FLIR QuickReport Software for analysis and reporting Compatible with Optional Microsoft Word-Based ThermaCAM Reporter Software w/spell CheckFLIR T335 Thermal Imaging Camera kit includes: FLIR T335 Thermal Imager Camera FLIR QuickReport software FLIR T335 Transport case FLIR T335 Storage case SD memory card Rechargeable battery AC adaptor/charger 2-bay battery charger Power supply Power cord Sun shield Headset USB and video cables Stylus pen Lens cap FLIR T335 User documentation CD-ROM (21 languages) Getting started guideCall us on 0800 247 1600 to discuss a wide range of lenses, software, and accessories for the T Series!Other Flir Thermal Imaging Cameras:Flir i5, Flir i7, Flir InfraCam SD, Flir BCam SD, Flir b40, Flir b50, Flir b60, Flir i40, Flir i50, Flir i60, Flir T200, Flir T250, Flir T360, Flir T365, Flir T425, Flir B200, Flir B250, Flir B335, Flir B360, Flir B365, Flir B425Click here for Thermal Imaging (Imager) Camera information. Electrical Applications http://www.pat-services.co.uk/flir-t335-thermal-imaging-camera-1485.htm http://www.pat-services.co.uk/flir-b335-thermal-imaging-camera-1483.htm The New FLIR B335 Thermal Imaging Camera makes high-end infrared affordable to the wide professional audienceThe FLIR B335 Thermal Imager is an innovative, feature rich infrared camera equipped with FLIR's Thermal Fusion technology.FLIR B335 Thermal Imager with Thermal Fusion Technology The Thermal Fusion functionality allows for easier identification and interpretation of infrared images. This advanced technology enhances the value of an infrared image by allowing you to overlay it directly over the corresponding visible image. The functionality combines the benefits of both the infrared image and visual picture at the push of a button. The FLIR B335 Thermal Imaging Camera does this in real time and the overlay function can be easily adjusted to suit any application such as electrical surveys, building diagnostics, and mechanical inspections.Applications for the FLIR B335 Thermal ImagerThe latest FLIR B335 IR Camera is designed to tackle the performance demands of industrial, plant, and utility professionals responsible for effective electrical / mechanical inspections and MRO. With an attractive price / performance ratio, the B335 Thermal Imaging Camera makes high-end IR available as an important tool to increase productivity for professional user.Easy to use for quick, accurate diagnosticsThe B335 Thermal Imaging Camera belongs to the FLIR B Series of powerful, simple-to-use, and durable IR cameras, and has a 320 x 240 focal plane array detector (76,800 pixels). This new camera stands out from the competition with a combination of versatile and sophisticated features only found on FLIR cameras. For quick, highly detailed diagnostics in industrial applications, the B335 Thermal Imager matches 2 % thermal accuracy and < 0.05 C thermal sensitivity (NETD) with an insulation and humidity alarm.Flexible functions and unique featuresTo tailor temperature readings to a user's specific needs, the FLIR B335 Thermal Imaging Camera offers measurement modes over and above center-spot readings: 5 spot meters, 5 box areas, isotherm color alarms and automatic hot/cold spot. Text annotation connects voice comments with images, even on reports.FLIR B335 Thermal Imaging Camera features:Imaging and optical data Optics head and display screen are independently rotatable for optimum viewing (Field of view: 25 x 19) Lens: 25 (and interchangeable optics) Focal Plane array (FPA), uncooled microbolometer, 320 x 240 pixels Thermal sensitivity (NETD): 50 mK (0.05C at 30C) Focus: Manual/automatic Spectral range: 7.5 to 13m Built-in LaserLocatIRImage presentation Large 3.5" colour touch screen LCD Onscreen thumbnail image gallery Image modes: IR image, visual image Picture-in-Picture: Scalable IR area on visual image NEW IR Window Correction - When inspecting high voltage through safety IR windows this software corrects the image and severely improves quality.Measurement Temperature range: -20 C to +120C (-4F to + 248F) Accuracy 2CMeasurement analysis Insulation Alarm: Indicates insulation performance of the building Humidity Alarm (including Dew Point Alarm): Alerts you to areas where there is a risk of condensation 5 spot meters Area: 5 box areas with max/min/average Isotherm: Detect high / low temperature/interval NEW MeterLink - New technology allowing you to wirelessly connect FLIR infrared cameras to Bluetooth Extech meters (e.g. Extech InspectorPro MO297 Multi-function Moisture Meter and Psychrometer) This data is instantly imprinted onto the thermal image.Set-up Colour palettes: BW, BW inv, iron, rain Storage of images Image storage: Removable SD-card (1000 images) Image frequency: 9Hz NEW Copy to USB - Copy results to USB for quick data transfer.Digital camera 3.1 megapixel (2048 x 1536 pixels) with flash NEW Zoom 2xImage annotations Voice 60 seconds Text from predefined list or soft keyboard on touch screenPhysical data Holster for portability and easy access to camera Interface: USB, file transfer to/from PC Long 4-Hour battery with in-camera charging or car charger Dimensions: 106 x 201 x 125 mm Weight: 880gSoftware Includes FLIR QuickReport Software for analysis and reporting Compatible with Optional Microsoft Word-Based ThermaCAM Reporter Software w/spell CheckFLIR B335 Thermal Imaging Camera kit includes: FLIR B335 Thermal Imager Camera FLIR QuickReport software FLIR B335 Transport case FLIR B335 Storage case SD memory card Rechargeable battery AC adaptor/charger 2-bay battery charger Power supply Power cord Sun shield Headset USB and video cables Stylus pen Lens cap FLIR B335 User documentation CD-ROM (21 languages) Getting started guideCall us on 0800 247 1600 to discuss a wide range of lenses, software, and accessories for the B Series!Other Flir Thermal Imaging Cameras:Flir i5, Flir i7, Flir InfraCam SD, Flir BCam SD, Flir b40, Flir b50, Flir b60, Flir i40, Flir i50, Flir i60, Flir T200, Flir T250, Flir T335, Flir T360, Flir T365, Flir T425, Flir B200, Flir B250, Flir B360, Flir B365, Flir B425Click here for Thermal Imaging (Imager) Camera information. Building Applications http://www.pat-services.co.uk/flir-b335-thermal-imaging-camera-1483.htm http://www.pat-services.co.uk/metrel-mi2093-cable-fuse-locator-1481.htm Metrel MI 2093 Universal Tracing and Locating System / Cable Tracer / Cable Locator / Fuse Finder / Line TracerThe Metrel MI2093 Universal Tracing and Locating System is a professional fuse finder and cable tracer in one.  This cable locator works whether the system is live or dead.Metrel MI 2093 Cable Locator / Fuse Finder applications: Locates fuses and assignment to fuses Traces cables in walls, ceilings, floor and ground Traces live or voltage free cables Locates cable interruptions and short circuits Locates concealed sockets and distribution boxes Determines individual wires in a bunch of wires Traces pipe installations and other conductive loopsMetrel MI 2093 Cable Locator / Fuse Finder key features: Detection depth up to 2 m can be achieved Works on both, energized and non-energized systems The highly sensitive Receiver R10K detects the injected signal around the measured line or object Three levels of sensitivity adjustment: low, middle and high. Each level can be additionally precisely adjusted Dual, bar-graph and buzzer indicator offers easy indication in dark and noisy environmentMetrel MI 2093 Cable Locator / Fuse Finder specification:Transmitter Size: H: 200mm x W: 100mm x D: 50mmTransmitter Weight: 300gReceiver Size: H: 210mm x W: 45mm x D: 45mmReceiver Weight: 150gMetrel MI 2093 Universal Tracing and Locating System kit includes: Metrel MI2093 Transmitter T10K Metrel MI2093 Receiver R10K 2x Test tip (black) 2x Alligator clip Special selective probe Test lead, 1.5 m for R10K with built-in resistor Metrel MI2093 Small soft carrying bag Metrel MI2093 Instruction manual Declaration of conformity Product verification data Fuse Finders / Cable Locators http://www.pat-services.co.uk/metrel-mi2093-cable-fuse-locator-1481.htm http://www.pat-services.co.uk/metrel-tek3002-carbon-monoxide-detector-1479.htm Metrel TEK 3002 Carbon Monoxide Detector / CO Detector / CO MeterThe Metrel TEK3002 Carbon Monoxide Meter detects the presence of Carbon Monoxide and measures concentrations between 1 - 1000 parts per million (PPM).  LCD reading with warning tone, intermittent up to 200PPM and continuous tone above 200PPM.Metrel TEK 3002 Carbon Monoxide Detector features: 3 inch digit display High accuracy, quick response Pocket size Simple and easy-to-use Fast sampling Data MAX and hold functions Auto power off Measuring range 0 - 1000PPMMetrel TEK 3002 Carbon Monoxide Detector standards: Conforms to European standards EN: 50081-1 EN: 50082-1Metrel TEK 3002 Carbon Monoxide Detector specification:Operating Temperature: 0C to 50.0CStorage Temperature: -30C to 60.0COperating Humidity: 0 - 90% Relative Humidity (non-condensing)Measurement Range: 0 - 1000PPMMeasurement Resolution: 1PPMAccuracy: 5% or 10PPMWarm-up Period: Less than 2 secondsBattery: 9V, NEDA 1604A or equivalentSensor Type: Stabilised Electrochemical Gas-specific (CO)Typical Sensor Life: 3 yearsSize: H: 160mm x W: 56mm x D: 40mmWeight: 180g Environmental Test Equipment http://www.pat-services.co.uk/metrel-tek3002-carbon-monoxide-detector-1479.htm http://www.pat-services.co.uk/metrel-tek3000-gas-leak-detector-1477.htm Metrel TEK 3000 Flammable Gas Leak DetectorThe Metrel TEK3000 is a new Gas Leak Detector from Metrel which fulfils the established European and International Guideline requirements.  This Gas Leakage Detector is a low maintenance, easy-to-use portable pen size detector that can detect small or large leaks.  The Metrel TEK 3000 Flammable Gas Leak Detector can be used in commercial, residential and industrial applications.Metrel TEK 3000 Flammable Gas Leak Detector features: Portable gas detector Detects gas leakage Detects LNG and LPG Simple and easy-to-useMetrel TEK 3000 Flammable Gas Leak Detector standards: Conforms to European standards EN: 50081-1 EN: 50082-1Metrel TEK 3000 Flammable Gas Leak Detector specification:Weight: 25g Environmental Test Equipment http://www.pat-services.co.uk/metrel-tek3000-gas-leak-detector-1477.htm http://www.pat-services.co.uk/metrel-tek1336-digital-light-meter-1475.htm Metrel TEK 1336 Digital Light MeterThe Metrel TEK1336 Digital Light Meter is a new 50,000 Lux meter from Metrel which provides accurate Lux/Light readings. This is an essential tool for designers or quality assurance managers to check lighting levels in a wide variety of situations.Metrel TEK 1336 Digital Light Meter features: 3 inch digital display, 2000 counts Measuring range up to 50,000 Lux Auto power off function MAX hold and Data hold Low battery warning User selectable Lux/Fc Attached photo sensor with cover Measurement rate 1.5 times per second Complete with carry caseMetrel TEK 1336 Digital Light Meter standards: Conforms to European standards EN: 50081-1 EN: 50082-1Metrel TEK 1336 Digital Light Meter specification:Max Range: 50,000 Lux/FcAccuracy: 5% 10d (<10,000 Lux/Fc), 10% 10d (>10,000 Lux/Fc)Max Resolution: 0.1 Lux/FcMeasuring Rate: 1.5 times per secondMeter Size: H: 188mm, W: 64mm, D: 24.5mmPhoto Detector Size: H: 155mm, W: 60mm, D: 27mmWeight: 160g Environmental Test Equipment http://www.pat-services.co.uk/metrel-tek1336-digital-light-meter-1475.htm http://www.pat-services.co.uk/metrel-tek3123-moisture-detection-meter-1473.htm Metrel TEK 3123 Moisture Detection MeterThe Metrel TEK3123 Moisture Meter is used to measure the moisture level in wood, plaster, concrete, mortar, brick, cardboard and paper. It displays the moisture level accordingly.  This information can be used to determine if the material is ready for use, unexpectedly wet or dry, or otherwise in need of further inspection.Metrel TEK 3123 Moisture Meter features: Simple and easy to use Measures moisture in wood, sawn timber, cardboard and paper Measures hardened materials such as plaster, concrete and brick Adjustable for wood temp of 20C Rugged caseMetrel TEK 3123 Moisture Meter specification:Measuring Principle: Electrical resistanceElectrode Length: 8mmElectrodes: Integrated, replaceableMeasuring Range: Wood: 6 - 44%, Material: 0.2 - 2.0%Display: Wood: 1%Accuracy: Material: 0.05%Battery: 3 x CR2032, replaceableHousing: Impact-proof plastic housingAmbient Temperature: 0 - 40CAmbient Moisture: 0 - 85% Environmental Test Equipment http://www.pat-services.co.uk/metrel-tek3123-moisture-detection-meter-1473.htm http://www.pat-services.co.uk/flir-battery-1196398-spare-replacement-1471.htm Flir Battery 1196398-20Need a replacement battery or want a spare?  This battery is designed for Flir BCam SD, InfraCam SD, b40, b50, b60, i40, i50 and i60 Thermal Imaging Cameras.  If you have a long day ahead it's a good idea to have a fully charged spare battery to keep downtime to a minimum.Call us on 0800 247 1600 if your Thermal Imager is not listed. Thermal Imaging Camera Accessories http://www.pat-services.co.uk/flir-battery-1196398-spare-replacement-1471.htm http://www.pat-services.co.uk/metrel-tek1313-digital-anemometer-thermometer-1469.htm Metrel TEK 1313 Digital Anemometer with Temperature MeasurementThe Metrel TEK1313 Digital Anemometer comes with a built in K Type Thermometer.  This unit is highly sensitive/accurate and comes complete with a rigid carrying case and battery.  Check the good working order of your HVAC installations, simply and economically, with this air speed meter.Metrel TEK 1313 Digital Anemometer features: Measurement m/s, knots, km/hr Temperature measurement (C and F) Probe built into fan for accurate temperature reading Data MAX and hold function Low battery warningMetrel TEK 1313 Digital Anemometer standards: Conforms to European standards EN: 50081-1 EN: 50082-1 EN: 60825-1Metrel TEK 1313 Digital Anemometer specification: m/s - Range: 0.0 - 45.0, Resolution: 0.1, Threshold: 0.3, Basic Accuracy: 3% Knots - Range: 0.0 - 88.0, Resolution: 0.1, Threshold: 0.6, Basic Accuracy: 3% Km/hr - Range: 0.0 - 140.0, Resolution: 0.1, Threshold: 1.0, Basic Accuracy: 3% Temp C - Range: 0.0 - 60.0, Resolution: 0.1, Basic Accuracy: +0.8 Temp F - Range: 32.0 - 140.0, Resolution: 0.1, Basic Accuracy: +1.5 Meter size - H: 150mm, W: 72mm, D: 35mm Vane size - H: 132mm, W: 66mm, D: 29.2mm Weight - 245g Environmental Test Equipment http://www.pat-services.co.uk/metrel-tek1313-digital-anemometer-thermometer-1469.htm http://www.pat-services.co.uk/flir-soft-pouch-case-1122000-1467.htm Flir Soft Carry Case (1122000) for Flir Thermal Imaging Cameras.This padded Flir soft carry case is ideal for carrying your Flir Thermal Imaging Camera. It comes with an adjustable waist strap, so your Thermal Imager will always be at hand.  The Flir Soft Carry Case also has a velcro pocket for a spare battery. Thermal Imaging Camera Accessories http://www.pat-services.co.uk/flir-soft-pouch-case-1122000-1467.htm http://www.pat-services.co.uk/flir-hard-transport-carry-case-1465.htm Flir Hard Transport Case for Flir i5 and Flir i7.This Flir hard carry case is ideal for carrying your Flir i5 and Flir i7 Thermal Imaging Cameras and accessories.  It comes with precut foam which will fit all your equipment safely and protect it from damage in the field. Thermal Imaging Camera Accessories http://www.pat-services.co.uk/flir-hard-transport-carry-case-1465.htm http://www.pat-services.co.uk/kewtech-kt65-multifunction-tester-promo-1463.htm This exclusive promotion will save you s!Kewtech KT65 Promo Multifunction Tester Kit includes:  Kewtech KT65 Multifunction Tester Lightmate Set PAT Adapter 1 Kewtech R2 KewstickThe kewtech KT65 Multifunction tester uses anti-trip technology and can perform Insulation, Continuity, Loop, PSC and RCD tests. Kewtech KT65 Features  Easy to use  Phase rotation in line with new 17th edition requirements  Advanced memory with free software  New Anti-Trip technology for full no trip LOOP testing on all RCD types  Test button in probe as well as lockdown test button for hands free testing  Easy PFC & PSC measurement without the need to alter test probes  250, 500 and 1000V insulation tests with auto discharge  Additional LED for warning of high voltage output in insulation test mode  Memory for test lead resistance compensation  Backlit display  Auto-test memory for RCD testing with all results shown on one screen  Conducts phase to phase loop tests  End of line calibration certificate included  Can be used with rechargeable batteries  Complies with BS7671 (Part P) Kewtech KT65 Accessories   Kamp 12 Mains lead   ACC065 G7 Test lead set   ACC064 SP Test remote with remote test button   Batteries   Test lead pouch   Soft carry case   Instruction Manual   Calibration Certificate Installation Testers http://www.pat-services.co.uk/kewtech-kt65-multifunction-tester-promo-1463.htm http://www.pat-services.co.uk/seaward-europa-plus-promo-kit-1461.htm This exclusive promotion will save you s! Seaward Europa Plus Promo PAT Tester Kit includes:  Seaward Europa Plus PAT Tester Seaward PATGuard Lite V2 Software The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 250 Failed Labels 500 Cable Wraps Also comes supplied with:  Protective Rubber Cover  Carry Case  RS232 Download Lead  Earth Bond Lead  User Manual  240v Plug to 110v Adapter for testing 110v appliances One of our best selling PAT testers! The Seaward Europa Plus is a light weight version of the Seaward SuperNova.  If you need a PAT tester for a school, college, university or your PAT testing business then the Seaward Europa Plus is the one for you.  It is the preferred PAT tester of PAT testing businesses and companies that have to test large numbers of appliances. It will test IT, non IT and 110v equipment.  If you require a 110v run test take a look at the Seaward SuperNova. The PAT tester is fully computerised with a built in QWERTY keyboard for fast entry of test results and a built in IEC socket for testing IEC and extension leads.  With the Seaward Europa Plus there is no need for a separate extension lead adapter like some testers. Seaward Europa Plus Overview: When carrying out testing the Europa Plus PAT tester first lets you enter the appliance number which can be automatically incremented or decremented. Then enter the appliances location or room it is in, along with the retest frequency, which is selectable from a drop down menu. Once the above information has been entered into the Seaward Europa Plus you are presented with a menu of fully configurable pre-defined tests which are factory set. There are tests for Class 1 and Class 2 equipment of different types; such as hand held and portable equipment, movable and stationary and also IEC and extension lead tests. Once the test has been selected the Seaward Europa Plus automatically carries out the test and displays the test results on a large clear backlit display. At the end of the test you can enter the appliance description, serial/model number and any notes. Use the software to enter short codes for things such as descriptions; you dont have to type extension lead all day long for the description when you could just type 9E and the Seaward Europa Plus will automatically change it. The test results from the Seaward Europa Plus PAT tester can be downloaded to various software packages such as Seaward PATGuard Lite V2 (included)!  The memory on the Seaward Europa Plus will hold 5000 test records, so there is ample space for several weeks worth of testing. Other facilities include the ability to add a Barcode Scanner (optional) to the tester so that instead of typing a 20 digit serial number you can scan a model/serial number barcode and the information will be transferred directly to the tester. You can even attach a Test n Tag Printer (optional) which will produce a label to attach to the appliance.Calibration is NOT included. Seaward Europa Plus Kits http://www.pat-services.co.uk/seaward-europa-plus-promo-kit-1461.htm http://www.pat-services.co.uk/megger-pat350-pat-tester-1459.htm The new Megger PAT350 PAT Tester is one of two new Portable Appliance Testers from Meggers PAT 300 range.This portable PAT Tester is ideal for testing all electrical equipment to meet Health and Safety regulations. The Megger PAT350 PAT Tester is a fully featured tester with dedicated test buttons for direct access to tests.The Megger PAT350 can test a full range of electrical items including Class I, Class II, IEC Power Leads, Extension Leads and full tests for portable RCDs. It also has the ability to carry out Flash Tests. An automatic mode is available for Class I and Class II testing. In automatic mode, the tests proceed sequentially through bond, insulation and operation, indicating a pass or fail at each test.If a fail occurs, the Megger PAT350 stops testing. When manual testing, each test is preceded by a selection screen where the test parameters are selected, such as bond test current, insulation test voltage or leakage test type. These diagnostic buttons provide direct access to any test individually, allowing single tests to be performed following repair or a suspect result.Megger PAT350 PAT Tester key features: Flash test Simple manual or automatic testing 230 V and 110 V operation Bond testing at 25 A,10 A and 200 mA Differential, touch and substitute leakage testing Full colour display Tests portable RCDs and extension leadsMegger PAT350 comes supplied with: Megger PAT350 PAT Tester Megger PAT350 carry case Flash test probe Combined earth-bond and insulation test lead Adaptor for testing extension leadsAlso available in this range is the Megger PAT320. This has all of the same feature of the PAT350 only without the added capability of Flash Test.Calibration is NOT included. Mid-Range PAT Testers http://www.pat-services.co.uk/megger-pat350-pat-tester-1459.htm http://www.pat-services.co.uk/megger-pat320-pat-tester-1457.htm The new Megger PAT320 PAT Tester is one of two new Portable Appliance Testers from Meggers PAT 300 range.This portable PAT Tester is ideal for testing all electrical equipment to meet Health and Safety regulations. The Megger PAT320 PAT Tester is a fully featured tester with dedicated test buttons for direct access to tests.The Megger PAT320 can test a full range of electrical items including Class I, Class II, IEC Power Leads, Extension Leads and full tests for portable RCDs. An automatic mode is available for Class I and Class II testing. In automatic mode, the tests proceed sequentially through bond, insulation and operation, indicating a pass or fail at each test.If a fail occurs, the Megger PAT320 stops testing. When manual testing, each test is preceded by a selection screen where the test parameters are selected, such as bond test current, insulation test voltage or leakage test type. These diagnostic buttons provide direct access to any test individually, allowing single tests to be performed following repair or a suspect result.Megger PAT320 PAT Tester key features: Simple manual or automatic testing 230 V and 110 V operation Bond testing at 25 A,10 A and 200 mA Differential, touch and substitute leakage testing Full colour display Tests portable RCDs and extension leadsMegger PAT320 comes supplied with: Megger PAT320 PAT Tester Megger PAT320 carry case Combined earth-bond and insulation test lead Adaptor for testing extension leadsAlso available in this range is the Megger PAT350. This has all of the same feature of the PAT320 only with the added capability of Flash Test.Calibration is NOT included. Megger PAT Testers http://www.pat-services.co.uk/megger-pat320-pat-tester-1457.htm http://www.pat-services.co.uk/ca-850-digital-manometer-1455.htm Chauvin Arnoux C.A 850 Digital ManometerThe Chauvin Arnoux C.A 850 Digital Manometer is ideal for measuring relative and differential pressure levels in air conditioning installations, medical equipment and pneumatic control systems. The measurements are easy to read with its large display.Chauvin Arnoux C.A 850 Digital Manometer features: Time/date stamped monitoring Accurate and easy-to-use Time-stamped MIN and MAX monitoring Differential pressure measurement Measurement hold Auto-stop Large display with backlight Robust ABS casingChauvin Arnoux C.A 850 Digital Manometer specification: Measurement range: -6.89 to 6.89 bar Accuracy: 0.3% full scale Units: +/- 3% of full scale Dimensions: 182 x 72 x 30mm - Weight: 220gChauvin Arnoux C.A 850 Digital Manometer kit includes: Chauvin Arnoux CA 850 Digital Manometer Chauvin Arnoux CA 850 Digital Manometer carrying case Chauvin Arnoux CA 850 operating manual 2x Connection pipes Battery Environmental Test Equipment http://www.pat-services.co.uk/ca-850-digital-manometer-1455.htm http://www.pat-services.co.uk/ca-822-air-speed-anemometer-1453.htm Chauvin Arnoux C.A 822 Thermo Anemometer (Physics Line)In its ergonomic, robust casing, the Chauvin Arnoux C.A 822 Thermo Anemometer from the Physics Line range measures temperature and air speed simply with its double display.  Check the good working order of your HVAC installations, simply and economically, with this air speed meter.Chauvin Arnoux C.A 822 Thermo Anemometer features: Easy-to-use Dual display Maximum, average, minimum value in temperature Measurement unit selection Hold display Backlit Rugged and ergonomic casing (shock-proof protection)Chauvin Arnoux C.A 822 Thermo Anemometer specification: Air speed sensor: Rotating vane Air speed range: 0.4 to 30 m/s Air speed accuracy: +/- 3% of full scale Temperature range: -20C to 60C Temperature range: +/- 0.5C Dimensions: 173 x 60.5 x 38mm - Weight: 330gChauvin Arnoux C.A 822 Thermo Anemometer kit includes: Chauvin Arnoux CA 822 Air Speed Meter Chauvin Arnoux CA 822 operating manual Rotating vane sensor Battery Environmental Test Equipment http://www.pat-services.co.uk/ca-822-air-speed-anemometer-1453.htm http://www.pat-services.co.uk/ca-847-humidity-moisture-meter-1451.htm Chauvin Arnoux C.A 847 Materials Moisture Meter / Hygrometer (Physics Line)Protected by a shockproof sheath in a compact case, the Physics Line Chauvin Arnoux C.A 847 Materials Humidity Indicator checks the humidity content from 6 to 100% in construction materials like plaster, wood, etc.Chauvin Arnoux C.A 847 Materials Moisture Meter features: Easy-to-use Ideal for detecting leaks 2 x 20 LED display scales 2 display scales using 20 LEDs: 6 to 23% / 24 to 100% Integrated, replaceable electrodes (L=12 mm) Utilisation environment: 0 to 50C (<80% RH) Battery charge indicatorChauvin Arnoux C.A 847 Materials Moisture Meter specification: RH range: 6 to 100% RH RH accuracy: +/- 1 LED Dimensions: 195 x 60.5 x 38 mm - weight: 160gChauvin Arnoux C.A 847 Materials Moisture Meter kit includes: Chauvin Arnoux CA 847 Materials Humidity Tester Chauvin Arnoux CA 847 user guide Battery Environmental Test Equipment http://www.pat-services.co.uk/ca-847-humidity-moisture-meter-1451.htm http://www.pat-services.co.uk/ca-848-thermo-hygrometer-hygrometry-1445.htm Chauvin Arnoux C.A 848 Thermo HygrometerThe Chauvin C.A 848 Thermo Hygrometer has been designed for technicians responsible for adjusting and inspecting aeraulics, heating and cooling installations.Chauvin Arnoux C.A 848 Thermo Hygrometer features: Easy-to-use 3 in 1: hygrometry, ambient temperature and dew point measurement Max / Min / Hold function 2 parameters displayed simultaneously Remoted probe Dual backlit display Magnetised shockproof protective sheathChauvin Arnoux C.A 848 Thermo Hygrometer specification: RH range: 5 to 95% RH RH accuracy: +/- 2% R +1.8% RH Temperature range: -20C to 80C Temperature accuracy: 2% R + 0.3C Dimensions: 145 x 75 x 34mm - Weight: 190gChauvin Arnoux C.A 848 Thermo Hygrometer kit includes: Chauvin Arnoux CA 848 Thermo Hygrometer Chauvin Arnoux CA 848 user guide Battery Environmental Test Equipment http://www.pat-services.co.uk/ca-848-thermo-hygrometer-hygrometry-1445.htm http://www.pat-services.co.uk/ca-846-thermo-hygrometer-hygrometry-1443.htm Chauvin Arnoux C.A 846 Thermo Hygrometer (Physics Line)Protected by a shockproof sheath in a compact case, the Physics Line Chauvin Arnoux C.A 846 Thermo Hygrometer with its built-in sensor can measure ambient temperatures between -20 and +60C inclusive, as well as humidity between 0 and 100%Chauvin Arnoux C.A 846 Thermo Hygrometer features: Easy-to-use 2 in 1: measures hygrometry and ambient temperature Max / Hold function Measure in C or F 3 digit display (2,000 counts) Backlight Shockproof protective sheathChauvin Arnoux C.A 846 Thermo Hygrometer specification: RH range: 0 to 100% RH RH accuracy: +/- 7.5% RH Temperature range: -20C to 60C Temperature accuracy: +/- 0.5C Dimensions: 173 x 60.5 x 38mm - Weight: 185gChauvin Arnoux C.A 846 Thermo Hygrometer kit includes: Chauvin Arnoux CA 846 Thermo Hygrometer Chauvin Arnoux CA 846 user guide Battery Environmental Test Equipment http://www.pat-services.co.uk/ca-846-thermo-hygrometer-hygrometry-1443.htm http://www.pat-services.co.uk/ca-1884-thermal-imaging-imager-1441.htm Chauvin Arnoux C.A 1884 Thermal Imaging Camera / Infrared CameraChauvin Arnoux C.A 1884 Thermal Imaging Camera is ideal for electrical application (i.e. circuit breakers and generators), mechanical applications (i.e. electrical motors) and thermal applications (i.e. water leaks and building maintenance).Chauvin Arnoux C.A 1884 Thermal Imaging Camera features: Simplicity and accuracy for rapid fault diagnosis Optimised metrology, possibility of multiple parameterisation and high-accuracy measurement Recording capacity of 1,000 radiometric images Pistol shape and multi-directional screen Measurements from as close as 10cm Automatic recognition of hot and cold points Rugged, lightweight, ergonomic, leakproof (IP 54) USB connection allows data to be transferred from the Chauvin Arnoux C.A 1884 Infrared Camera to a PC Video cable for display on an external screen Supplied with Chauvin Arnoux Thermal Imager RayCAm Report software (see below)Chauvin Arnoux C.A 1884 Thermal Imaging Camera advantages: Ergonomic for easy measurement even in situations where access is difficult Automatic identification of hot and cold points Adjustment of the parameters influencing the measurement:- Adjustable emissivity- Adjustment of the measurement distance- Parameterisation of the relative humidity and ambient temperature Parameterisable alarms Isotherm function Storage capacity of 1,000 radiometric images with organization in 250 foldersChauvin Arnoux C.A 1884 Thermal Imaging Camera specification:Detector: 160 x 120, Refresh rate: 50HzOptics: Viewing angle: 20 x 15, IFOV: 2.2 mrad, min focusing distance: 10cmMeasurement range: -20 to 250Accuracy: 2 C or 2 %Adjustment: Emissivity, ambient temperature, distance, relative humidityMemory: 1000 radiometric images in 250 foldersMeasurement tools: 3 manual cursors, 1 automatic Max/Min temperature detector, isotherm, alarmErgonomics: Pistol shaped with multidirectional screen, 0.7kgChauvin Arnoux C.A 1884 Thermal Imaging Camera comes with RayCAm Report software: Chauvin Arnoux Thermal Imager RayCAm Report is an ideal tool for analysing the results, creating customised reports and exporting them into Word. Its interface is so simple that anyone can learn to use it very quickly.All the analysis functions are accessible via the toolbar. Depending on their requirements, users can position various elements: Cursors (automatic display of the temperature at the point selected) Thermal profile (automatic display of the Min/Max/Average temperatures of the line) A square or circle for area analysis (ideal for Min/Max/Average temperature comparisons between terminals, for example)The "Max" function automatically indicates the hottest point in the whole thermogram or in a redefined area of analysis.Chauvin Arnoux C.A 1884 Thermal Imaging Camera / Infrared Camera kit includes: Chauvin Arnoux CA 1884 Thermal Imager Chauvin Arnoux CA 1884 hard case Chauvin Arnoux RayCAm Report software Battery Charger USB cable Video cableNeed accessories/spares?  Call 0800 247 1600 for options.Click here for Thermal Imaging (Imager) Camera information. Electrical Applications http://www.pat-services.co.uk/ca-1884-thermal-imaging-imager-1441.htm http://www.pat-services.co.uk/ca-8342-power-analyser-wattmeter-1439.htm Chauvin Arnoux C.A 8342 Power Quality Analyser / Analyzer (Portable Watt Meter)The Chauvin Arnoux C.A 8342 Power Quality Analyser groups the essential measurements for the maintenance of balanced or unbalanced 4U/4I electrical installations. With a graphic colour touch screen and recording mode, this top-of-the-range instrument can also be used to capture and analyse events causing disturbances. A great feature of the Chauvin Arnoux C.A 8342 Power Quality Analyser is the ability to capture short events with a 1 MHz sampling rate.Chauvin Arnoux C.A 8342 Power Quality Analyser (Portable Wattmeter) features: 8 inputs: 4 voltage and 4 current Intuitive touch-screen interface Lightweight, rugged instrument Developed for all AC/DC applications Insulated voltage and current inputs Independent triggering of signals between channels or, on the contrary, linked and conditioned triggering Very fast sampling rate for event capture (up to 1 microsecond/channel) Totally automated oscilloscope mode Configuration of event capture for transients or on the RMS value Measurement of THD and TID (inter-harmonics) up to the 63rd order Interfacing with a PC via an RS-232, Ethernet or USB link Operation on batteries (external charger) or mains 128 MB memory depth, the equivalent of several weeks Flicker measurements (PST, PLT) as per IEC 61000-4-15 Chauvin Arnoux Dranview software can be used to analyse measurement campaignsChauvin Arnoux C.A 8342 Power Quality Analyser (Portable Wattmeter) standards:Complies with IEC 61000-4-30 Class A, IEC 61010 600 V CAT III, EN50160 and IEEE 1159Chauvin Arnoux C.A 8342 Power Quality Analyser / Analyzer (Portable Wattmeter) kit includes: Chauvin Arnoux CA 8342 Power Quality Tester Chauvin Arnoux CA 8342 carrying bag 128mb memory card Chauvin Arnoux Dranview software 8x 3m colour coded banana/banana leads 4x Black leads with hermaphrodite connecters 230V mains adaptor Chauvin Arnoux C.A 8342 operating manualWhy not add a set of clamps?  Call 0800 247 1600 for options. Power Quality Equipment http://www.pat-services.co.uk/ca-8342-power-analyser-wattmeter-1439.htm http://www.pat-services.co.uk/ca-8335-qualistar-power-analyser-1437.htm Chauvin Arnoux QualiSTAR+ C.A 8335 Power and Energy Quality Analyser / Analyzer (Three-phase network and energy analyser)Designed for inspection and maintenance teams in industrial or administrative buildings, the Chauvin Arnoux QualiSTAR+ C.A 8335 Power and Energy Quality Analyser can provide a snapshot of the main electrical network quality characteristics.The Chauvin Arnoux QualiSTAR+ C.A 8335 Energy and Power Quality Analyser is easy to handle and precise, it offers a large number of calculated values and several processing functions.Equipped with 4 voltage inputs and 4 current inputs, the Chauvin Arnoux QualiSTAR+ C.A 8335 Energy and Power Quality Tester measures all voltage, current and power parameters required for full diagnosis of an electrical installation. It simultaneously captures and records all parameters, transients, alarms and wave forms.Chauvin Arnoux QualiSTAR+ C.A 8335 Power and Energy Quality Analyser features: Simultaneous real-time display of all 4 inputs is available in graphic, vectorial or value-table format In Inrush mode, the measurement covers a duration of more than 1 minute The Chauvin Arnoux Qualistar+ C.A 8335 can also capture and record:- Min/Max values- Up to 300 transients- Harmonics up to the 50th order- 50 screens and curves- 10,000 alarms of 40 different types Its storage capacity allows all the parameters to be recorded at the maximum sampling rate over a period of more than one month 21 language menus Voltage/current inputs fitted with colour-coded identification rings Real-time display of the various wave forms Wide VGA colour display for easy reading Stability ensured by the fold-away stand Direct access to the main functions (configuration, screenshots, etc) Direct access to the main measurements (harmonics, etc) USB connection from Chauvin Arnoux QualiSTAR+ C.A 8335 Energy and Power Quality Analyser to PCChauvin Arnoux QualiSTAR+ C.A 8335 Power and Energy Quality Analyser functions: Harmonics and triplen harmonics Real-time display of wave forms (4 voltages and 4 currents) Half-period RMS measurements of voltages and currents Intuitive use Automatic recognition of the different types of current sensors Integration of all the DC components Measurement, calculation and display of harmonics up to the 50th order, with their phase information Calculation of Total Harmonic Distortion (THD) Capture of transients as short as one sample (1/256th of a period) Display of phasor diagram on Chauvin Arnoux QualiSTAR+ C.A 8335 Power and Energy Quality Tester screen Measurement of the total VA, W and var power values, as well as the values per phase Measurement of total VAh, Wh and varh values, as well as the values per phase Calculation of the K-Factor Calculation of the cos displacement power factor (DPF) and the power factor (PF) Capture of up to 300 transients Flicker calculation Unbalance calculation (current and voltage) Monitoring of the electrical network with setting of alarms Back-up and recording of screenshots (image and data) Recording and export on PC Software for data recovery and real-time communication with a PC.Chauvin Arnoux QualiSTAR+ C.A 8335 Power and Energy Quality Analyser standards:IEC 61010 1,000 V CAT III / 600 V CAT IVChauvin Arnoux QualiSTAR+ C.A 8335 Power and Energy Quality Analyser / Analyzer kit includes: Chauvin Arnoux QualiSTAR+ CA 8335 Power and Energy Quality Tester Chauvin Arnoux QualiSTAR+ CA 8335 carrying bag USB lead 1 power supply charger Mains power cable 5x 3m voltage leads with 4 mm banana connectors 5x crocodile clips 12-colour identification set for leads and inputs Protective film for screen Safety plug Chauvin Arnoux QualiSTAR+ C.A 8335 operating manual Chauvin Arnoux PC software for data recoveryWhy not add a set of current sensors?  Call 0800 247 1600 for options. Power Quality Equipment http://www.pat-services.co.uk/ca-8335-qualistar-power-analyser-1437.htm http://www.pat-services.co.uk/ca-8334b-qualistar-power-analyser-1435.htm Chauvin Arnoux QualiSTAR C.A 8334b Power and Energy Quality Analyser / Analyzer (Three-phase network and energy analyser)Designed for inspection and maintenance teams in industrial or administrative buildings, the Chauvin Arnoux QualiSTAR C.A 8334b Power and Energy Quality Analyser can provide a snapshot of the main electrical network quality characteristics.The Chauvin Arnoux QualiSTAR C.A 8334b Energy and Power Quality Analyser is easy to handle and precise, it offers a large number of calculated values and several processing functions.Chauvin Arnoux QualiSTAR C.A 8334b Power and Energy Quality Analyser features: Colour LCD screen for graphic display 3 structured display modes: observation, diagnosis, monitoring Complete three-phase analysis:- Voltage, current- Power / energy- Harmonics (up to 50th order), flicker- Measurement of transients- Alarm trigger Recording of 12 screens Voltage/current inputs fitted with colour-coded identification rings Real-time display of the various wave forms Wide VGA colour display for easy reading Stability ensured by the fold-away stand Direct access to the main functions (configuration, screenshots, etc) Direct access to the main measurements (harmonics, etc) USB connection from Chauvin Arnoux QualiSTAR C.A 8334b Energy and Power Quality Analyser to PCChauvin Arnoux QualiSTAR C.A 8334b Power and Energy Quality Analyser functions: Harmonics and triplen harmonics Real-time display of wave forms (4 voltages and 4 currents) Half-period RMS measurements of voltages and currents Intuitive use Automatic recognition of the different types of current sensors Integration of all the DC components Measurement, calculation and display of harmonics up to the 50th order, with their phase information Calculation of Total Harmonic Distortion (THD) Capture of transients as short as one sample (1/256th of a period) Display of phasor diagram on Chauvin Arnoux QualiSTAR C.A 8334b Power and Energy Quality Tester screen Measurement of the total VA, W and var power values, as well as the values per phase Measurement of total VAh, Wh and varh values, as well as the values per phase Calculation of the K-Factor Calculation of the cos displacement power factor (DPF) and the power factor (PF) Capture of up to 50 transients Flicker calculation Unbalance calculation (current and voltage) Monitoring of the electrical network with setting of alarms Back-up and recording of screenshots (image and data) Recording and export on PC Software for data recovery and real-time communication with a PCChauvin Arnoux QualiSTAR C.A 8334b Power and Energy Quality Analyser standards:IEC 61010 1,000 V CAT III / 600 V CAT IVChauvin Arnoux QualiSTAR C.A 8334b Power and Energy Quality Analyser / Analyzer kit includes: Chauvin Arnoux QualiSTAR CA 8334b Power and Energy Quality Tester Chauvin Arnoux QualiSTAR CA 8334b carrying bag Optical RS232 lead Mains power cable 4x 3m voltage leads with 4 mm banana connectors 4x crocodile clips Safety plug Chauvin Arnoux QualiSTAR C.A 8334b operating manual Chauvin Arnoux PC software for data recoveryWhy not add a set of current sensors?  Call 0800 247 1600 for options. Power Quality Equipment http://www.pat-services.co.uk/ca-8334b-qualistar-power-analyser-1435.htm http://www.pat-services.co.uk/ca-8230-power-quality-analyser-1433.htm Chauvin Arnoux C.A 8230 Power Quality Analyser / Analyzer (Electrical Network Analysis)The Chauvin Arnoux C.A 8230 Power Quality Tester is designed for self-employed electricians and installers working in the construction industry and maintenance departments. The broad range of measurements which it provides also makes it ideal for technical and technological education.Chauvin Arnoux C.A 8230 Power Quality Analyser features: Measurement of very low and very high currents Analysis of phase shift and harmonics Measurement of motor Inrush current Simultaneous access to all measurement modes Excellent value for money Inrush Current Function - Also called the starting current, the Inrush corresponds to the maximum input current drawn by an electrical device when it is powered up. For example, when they are first switched on, AC electric motors may draw several times their normal current at full load.Chauvin Arnoux C.A 8230 Power Quality Analyser overview:The Chauvin Arnoux C.A 8230 Power Quality Analyser single-phase or balanced three-phase power analyser is economical and extremely easy to use. Equipped with direct access to its various functions, it provides greater safety as it automatically recognises the type of connected sensor.It provides you with all the power measurements you need. It will enable you to measure and qualify your electrical network harmonics. An Inrush mode for starter currents will show your waveform in detail during several seconds. Like the Qualistar, the Chauvin Arnoux C.A 8230 Power Quality Analyser has a recording mode and a trigger mode for alarms.Extremely easy to handle, the Chauvin Arnoux C.A 8230 Power Quality Analyser can be used to test electrical installations, particularly when they include systems based on power electronics. It is suitable for use in the field or on a benchtop thanks to its retractable stand.Ergonomic and equipped with a wide graphic screen, it automatically recognizes the type of sensor connected.Chauvin Arnoux C.A 8230 Power Quality Analyser main measurements:(All these measurements are carried out in parallel) Voltage and current with instant display:As well as measuring the TRMS AC+DC value at the half-period, peak values and THD, this instrument also offers instant display of the waveform. Short-term flicker measurement is also available. Comprehensive power and energy analysis:All the measurements necessary for comprehensive power and energy analysis on both single-phase and three-phase systems. Harmonics up to the 50th order:The Chauvin Arnoux C.A 8230 Power Quality Analyser can be used to measure up to the 50th order of the different values. In addition, the expert mode allows you to determine the direction of the harmonics. Up to several days' recording:Up to several days' recording for all the values measured! Customization of alarm settings:More than 4,000 fully user-parameterisable alarms are available to capture each event.Chauvin Arnoux C.A 8230 Power Quality Analyser / Analyzer kit includes: 1x Chauvin Arnoux CA 8230 Power Quality Tester Chauvin Arnoux CA 8230 carrying bag 6x Fitted 1.2 V rechargeable batteries 1x Red banana lead (straight-straight) 1x Black banana lead (straight-straight) 2x 4mm test probes (1 red, 1 black) 2x Crocodile clips (1 red, 1 black) Mains adaptor Optical USB cable Chauvin Arnoux Power Analyser Transfer software Power Quality Equipment http://www.pat-services.co.uk/ca-8230-power-quality-analyser-1433.htm http://www.pat-services.co.uk/metrel-mi2392-power-q-plus-1431.htm Metrel MI 2392 Power Q Plus Energy Analyser/Analyzer ST (Standard Kit)The Metrel MI 2392 Power Q Plus Energy Analyser can be effectively used in different situations that include power quality assessment and troubleshooting in low voltage electrical systems. Loads balancing in 3-phase systems, power correction equipment performance evaluation, harmonics spectrum analysis for selection of harmonic filters, capturing inrush e.g. motor start up currents, voltage deviations (dips, sags) registering and energy recording.Due to its small size, the Metrel MI 3292 PowerQ Plus Energy Tester is ideally suited for routine or complex power quality assessment in heavy duty industrial environments.Metrel MI 2392 Power Q Plus Energy Analyser main features: True RMS and zero blind measurement and data logging of:- RMS and THD of voltages and currents - Power, power factor and energy Simultaneous analysis of basic power quality parameters (U, I, P, Q, S, PF) Harmonics analysis up to 50th component Phase diagram and unbalance calculation for 3-phase systems Voltage and current on-line scope function Inrush current measurement Voltage events (dip, swells and interrupts) evaluations Recording and reporting according to EN 50160 Online scope function Lightweight and user friendly designMetrel MI 2392 Power Q Plus Energy Analyser target applications: Power quality assessment and troubleshooting in low and middle voltage electrical systems Checking power correction equipment performance Harmonics spectrum analysis for selection of harmonic filters UPS, voltage generators and regulators checking and troubleshooting Voltage, current and power monitoring and recording Energy consumption monitoring and recording Motor start transients evaluation Capacitor bank or UPS transient switching evaluation Network power quality evaluation according to EN 50160Metrel MI 2392 Power Q Plus Energy Analyser standards:The Metrel MI 2392 Power Q Plus Energy Analyser is developed and manufactured in accordance with following standards:Safety: IEC/EN 61010-1EMC: IEC/EN 61326-1Measurements: EN 50160, EN 61000-4-30, Class BMetrel MI 2392 Power Q Plus Energy Analyser/Analyzer ST (Standard Kit) includes: Metrel MI2392 Power Q Plus Energy Analyser 3x Current clamp 1000 A/1 V 3x Test tips 4x Alligator clips 4x Voltage measurement cables RS232 download cable and USB cable Power supply adaptor 6x Rechargeable batteries Metrel MI2392 Power Q Plus Energy Analyser soft carrying bag Metrel MI2392 Power Q Plus Energy Analyser manual Handbook Modern Power Quality Measurement Techniques on CD Product verification data FREE Metrel PowerQ Link PC SW packageSimilar Metrel Power Quality Instruments:Metrel MI 2092 Power Harmonics Analyser, Metrel MI 2292 Power Quality Analyser. Power Quality Equipment http://www.pat-services.co.uk/metrel-mi2392-power-q-plus-1431.htm http://www.pat-services.co.uk/metrel-mi2292-power-quality-analyser-1429.htm Metrel MI 2292 Power Quality Analyser/Analyzer - Plus ST (Standard Kit)The Metrel MI 2292 Power Quality Tester has all the built in specs of the Metrel MI 2092 Power Harmonics Analyser but has many extra features, making it probably the best value for money tester on the market.  On-line monitoring of flickers, on-line monitoring of transients, transients oscilloscope analysing transient shapes and duration (<10 microseconds).Metrel MI 2292 Power Quality Analyser main features: Professional record function Accurate energy measurement: active and reactive, import and export, inductive and capacitive, separate registers for total, sub-total integration period Complete voltage and current harmonic analysis up to 41st High accuracy measurement and recording of power quality parameters (U, I, f, cos, PF, P, Q, S, current and voltage harmonics up to 63 rd order, etc.) 4-quadrant measurements (generator and load with capacitive or inductive character) Energy counter On-Line scope function allows voltage and current waveforms to be displayed, many amplitude ranges provide a clear view of the waveform Metrel MI 2292 Power Quality Analyser can be programmed either directly or via PC Large, high resolution LCD display with backlight Windows compatible Metrel PowerLink PC SW supports downloading, programming, communication with the instrument and transfer of recorded data to other MS programmes (Excel, Word, etc.) Power quality assessment according to EN 50160 including Flicker measurement and standardised printout report in graph and table form Transients measurements down to 20 microsecond with adjustable level triggers Waveform measurements with harmonics direction detection. Adjustable level and slope triggers on voltage and current Metrel MI 2292 Power Quality Analyser or a group of them can be remotely controlled and programmed via GSM modem On-line monitoring of transients (1000 periods) Special tools includes:- Waveform mode (7812 periods), signalling voltages- Fast logging oscilloscope start-up events based on half period values (166 minutes)- Transients oscilloscope analysing transient shapes and duration (<10 microsecond)Metrel MI 2292 Power Quality Tester is a complete single and 3-phase portable power analyser for use in industry, utilities and for general power quality diagnostics purposes. Three current and three voltage inputs combined with an internal memory module allow recording up to 4 weeks 64 parameters can be monitored or recorded simultaneously MS Windows compatible Metrel PC SW PowerLink serves for downloading, management of recorded data and preparation of test reports Wide range of accessories makes the Metrel MI 2292 Power Quality Analyser suitable for a variety of different applicationsMetrel MI 2292 Power Quality Analyser target applications: General power quality assessment in distribution and industrial low and middle voltage electric systems Capturing and recording of power supply events (shutdowns, interruptions, sags, dips) Flicker measurement Power factor correction equipment measurements Harmonics measurements and filter selection Transients recording and over-voltage protection devices (MO varistors) performance testing Assessment of UPS performance Consumption profile recording Motors inrush currents monitoring and recordingMetrel MI 2292 Power Quality Analyser standards:The Metrel MI 2292 Power Quality Analyser is developed and manufactured in accordance with following standards:Safety: IEC/EN 61010-1EMC: IEC/EN 61326-1Measurements: EN 50160, EN 61000-4-30, Class BMetrel MI 2292 Power Quality Analyser/Analyzer - Plus ST (Standard Kit) includes: Metrel MI2292 Power Quality Analyser 3x Current clamp 1000 A/1 V 3x Test tips 4x Alligator clips 4x Voltage measurement cables Mains cable RS232 download cable Power supply adaptor 4x Rechargeable batteries Metrel MI2292 Power Quality Analyser soft carrying bag Small soft carrying bag for current clamps Metrel MI2292 Power Quality Analyser manual Handbook Modern Power Quality Measurement Techniques on CD Product verification data FREE Metrel PowerLink PC SW packageSimilar Metrel Power Quality Instruments:Metrel MI 2392 Power Q Plus Energy Analyser, Metrel MI 2092 Power Harmonics Analyser. Power Quality Equipment http://www.pat-services.co.uk/metrel-mi2292-power-quality-analyser-1429.htm http://www.pat-services.co.uk/metrel-mi2092-power-harmonics-analyser-1427.htm Metrel MI 2092 Power Harmonics Analyser/Analyzer ST (Standard Set)The Metrel MI 2092 Power Harmonics Tester provides a simple and very accurate method of checking and monitoring the quality of power systems in accordance with the requirements of EN 50160. Usable, either directly on-line or for the logging of data, the Metrel MI 2092 Power Harmonics Analyser can quickly identify and solve many power distribution problems.Metrel MI 2092 Power Harmonics Analyser main features: Professional record function Accurate energy measurement: active and reactive, import and export, inductive and capacitive, separate registers for total, sub-total integration period Complete voltage and current harmonic analysis up to 41st High accuracy measurement and recording of power quality parameters (U, I, f, cos, PF, P, Q, S, current and voltage harmonics up to 63 rd order, etc.) 4-quadrant measurements (generator and load with capacitive or inductive character) Energy counter On-Line scope function allows voltage and current waveforms to be displayed, many amplitude ranges provide a clear view of the waveform Metrel MI 2092 Power Harmonics Analyser can be programmed either directly or via PC Large, high resolution LCD display with backlight Windows compatible Metrel PowerLink PC SW supports downloading, programming, communication with the instrument and transfer of recorded data to other MS programmes (Excel, Word, etc.)Metrel MI 2092 Power Harmonics Tester is a complete single and 3-phase portable power analyser for use in industry, utilities and for general power quality diagnostics purposes. Three current and three voltage inputs combined with an internal memory module allow recording up to 4 weeks 64 parameters can be monitored or recorded simultaneously MS Windows compatible Metrel PC SW PowerLink serves for downloading, management of recorded data and preparation of test reports Wide range of accessories makes the Metrel MI 2092 Power Harmonics Analyser suitable for a variety of different applicationsMetrel MI 2092 Power Harmonics Analyser target applications: General power quality assessment in distribution and industrial low and middle voltage electric systems Capturing and recording of power supply events (shutdowns, interruptions, sags, dips) Power factor correction equipment measurements Harmonics measurements and filter selection Consumption profile recordingMetrel MI 2092 Power Harmonics Analyser standards:The Metrel MI 2092 Power Harmonics Analyser is developed and manufactured in accordance with following standards:Safety: IEC/EN 61010-1EMC: IEC/EN 61326-1Measurements: EN 50160, EN 61000-4-30, Class BMetrel MI 2092 Power Harmonics Analyser/Analyzer ST (Standard Set) includes: Metrel MI2092 Power Harmonics Analyser 3x Current clamp 1000 A/1 V 3x Test tips 4x Alligator clips 4x Voltage measurement cables Mains cable RS232 download cable 4x Rechargeable batteries Metrel MI2092 Power Harmonics Analyser soft carrying bag Small soft carrying bag for current clamps Metrel MI2092 Power Harmonics Analyser manual Handbook Modern Power Quality Measurement Techniques on CD Product verification data FREE Metrel PowerLink PC SW packageSimilar Metrel Power Quality Instruments:Metrel MI 2392 Power Q Plus Energy Analyser, Metrel MI 2292 Power Quality Analyser. Power Quality Equipment http://www.pat-services.co.uk/metrel-mi2092-power-harmonics-analyser-1427.htm http://www.pat-services.co.uk/flir-i7-thermal-imaging-camera-1425.htm  Buy a Flir i7 Thermal Imaging Camera now and you will receive the following items FREE in this exclusive offer: Additional Battery Flir Carry Pouch Extech Industrial Troubleshooting Kit including:- True RMS, autoranging multimeter with 11 functions- 400A Clamp meter with basic AC Current and 1mA resolution- InfraRed Thermometer (-58 to 1000F/-50 to 538C) with laser pointer- Non-contact voltage detector (from 100V to 600V AC)- Test Leads and Type K Temperature Probe- Heavy Duty Carry CaseStock is limited... So when theyre gone, theyre gone!The new Flir i7 Thermal Imager is the smallest, lightest and most affordable infrared, thermal camera for building application work. It is incredibly easy to use and requires no former experience. It really is a matter of point-shoot-detect to obtain a high-quality thermal image that will immediately give you the infrared information you need. A Flir i7 Infrared Camera is a powerful predictive maintenance tool, as in many instances equipment failure is preceded by a period of increasing heat. A Flir i7 Thermal Imager Camera is also an excellent HVAC/building inspection instrument, it quickly scans and identifies problem areas that can't be seen by the naked eye. Many businesses use the Flir i7 Thermal Imaging Camera for repair verification and insurance purposes. Key features of the Flir i7 Thermal Imaging Camera are: High accuracy - 2% and thermal sensitivity of 0.1C helps you find problems faster and easier - critical for condition monitoring of thermally sensitive targets Extremely lightweight - Resulting in less user fatigue (340g) Easy-to-use - Pocket sized and fully automatic design makes the Flir i7 Thermal Imager incredibly easy-to-use even for first time users - perfect for general purpose use Focus free lens - For convenient viewing High Resolution LCD - 2.8" (71mm) color LCD Double Molded Design - Rugged design with easy grip handle construction meets IP43 dust/splashproof standards Measurement Modes - Spot (centre), Area (Min/Max), and Isotherm (above/below) display measurement modes Long Battery Life - >4 hour continuous operation on a single charge for uninterrupted inspections Large Memory Storage - MicroSD card stores up to 5000 Radiometric JPEG format images. Each image can be analyzed using the included Flir QuickReport PC Software RESNET Guidelines - The FLIR i7 Thermal Imaging Camera conforms to the recently proposed RESNET guidelines, which make it ideal for weatherisation and building inspection jobs as well as industrial and electrical applicationsThe Flir i7 Infrared Camera has all of the same great features of the other Flir Cameras in the Flir i - Thermal Imaging Camera range: Small and lightweight (only 340g) Easy to use Renowned picture quality Robust functionalityAdditional Features of The Flir i7 Thermal Imaging Camera: Fully automatic IR resolution: 120 x 120 pixels Field of View/min focus distance:  25˚ x 25˚/2 ft (0.6m) Temp Range:  32˚F to 482˚F (0˚C to 250˚C) Thermal Sensitivity of <0.1C at 25C Convenient Thumbnail Image Gallery Manual lens protector built into the Flir i7Flir i7 Thermal Imaging Camera kit includes: Flir i7 Thermal Imager Camera 512MB MicrosSD card and MiniSD adaptor Li-Ion rechargeable battery with AC adaptor/charger Flir QuickReport software USB mini-B cable Hand strap Flir i7 Thermal Imaging Camera and accessory hard case Calibration CertificateGet 1 day Thermal Imaging Training course with Flir for only 225 per person when you purchase this item from us, just ask for more details.Other Flir Thermal Imaging Cameras:Flir i5, Flir InfraCam SD, Flir BCam SD, Flir b40, Flir b50, Flir b60, Flir i40, Flir i50, Flir i60, Flir T200, Flir T250, Flir T335, Flir T360, Flir T365, Flir T425, Flir B200, Flir B250, Flir B335, Flir B360, Flir B365, Flir B425 Click here for Thermal Imaging (Imager) Camera information. Building Applications http://www.pat-services.co.uk/flir-i7-thermal-imaging-camera-1425.htm http://www.pat-services.co.uk/metrel-mi2120-combination-tester-1423.htm Metrel MI 2120 Loop, PSC and RCD Combination Tester with TripLockThe Metrel SmarTEC MI 2120 Loop, PSC and RCD Combination Tester is guaranteed not to trip any RCDs when loop testing. Also, electronic or mechanical breakers cannot be tripped when loop testing. The Metrel Combination Loop Tester carries out loop test PE and PN, SE and ZS.Metrel MI 2120 Loop, PSC and RCD Combination Tester features: Meets Part P requirements 1000 memory locations Warning indication of incorrect or out of limit results Socket for external battery charger Auto power-off Prospective short circuit current (Ipsc) Mains voltage (UL-N, UL-L, UL-PE)Metrel MI 2120 Combination Tester measures in accordance with:EN/IEC 61557-3, EN/IEC 61557-6, DIN/VDE 0413-3, DIN/VDE 0413-6, DIN/VDE 0100, BS 7671: 17th Edition, CEI 64.8Metrel MI 2120 Combination Tester - Fast and accurate measurement Line (earth) resistance with a test current of 2.5A Loop resistance with a test current of 2.5A Line/Line resistance with a test current of 2.5AMetrel MI 2120 Combination Tester - Fast testing of all RCDs 10, 30, 100, 300, 500, 1000 mA both standard and selective types, AC and A types. Test current multipliers of x 0.5, x 1 x 5 for checking of the trip out time on limit current values Selectable phase angle 0 (positive), 180 (negative) RCD trip-out current - measurement with high resolution test ramp RCD trip-out time - measurement at nominal differential current in accordance with the standards Contact voltage - measurement for checking of Earthing System Loop (earth) resistance measurement without tripping the RCDMetrel MI 2120 Loop, PSC and RCD Combination Tester kit includes: Metrel MI2120 Loop, PSC and RCD Combination Tester Mains measuring cable, 1.5 m 3x Universal test cable, 1.5m Test tip (black) Test tip (blue) 2x Alligator clip (black) Metrel MI 2120 instruction manual Product verification data 3 year warranty Loop and RCD Testers http://www.pat-services.co.uk/metrel-mi2120-combination-tester-1423.htm http://www.pat-services.co.uk/metrel-mi2088-20-insulation-tester-1421.htm Metrel MI 2088-20 Earth Spike Resistance and Insulation Tester (20m Earth Insulation Test Lead Set)The new Metrel MI 2088 Earth Insulation Tester is a very unique test station which allows you to carry out 4 pole earth resistance measurements, insulation resistance tests, voltage measurements, current TRMS, varistor, other voltage protection devices and continuity testing to the requirements of: BSEN61557, BS 7671 (17th Edition), VDE 0100, CEI 64.8, HD 384, VDE 0413, BSEN 61010-1, EN 50081-1 and EN 50082-1.Metrel MI 2088 Earth Insulation Tester features: Earth resistance BSEN61557-5, 4 pole Varistor over voltage protection devices 0.1mA - 200A current test (True RMS) resolution 0.1mA Insulation test 50, 100, 250 and 1000V Continuity test of protective conductors (>200mA) Compliant with BS EN 61557-2 and -4 One and two clamp earth resistance measurement (optional) 1000 test result storage on Metrel MI 2088 Earth Insulation Tester inbuilt memory Insulation range up to 30,000m Large easy to read back lit display Auto power offMetrel MI 2088 Earth Spike Resistance and Insulation Tester kit includes: Metrel MI2088 Earth Spike Resistance and Insulation Tester Earth test set - 20m Alligator clip Test tip (red) Test tip (black) RS232 download lead Metrel PC SW Earth Link (for Windows 95/98/2000/NT/XP) Metrel MI 2088 Insulation Tester and equipment soft carrying bag Metrel MI 2088 Instruction manual Handbook 'Measurements on electric installations in theory and practice' Calibration certificate Production verification data Declaration of warranty Insulation / Continuity http://www.pat-services.co.uk/metrel-mi2088-20-insulation-tester-1421.htm http://www.pat-services.co.uk/metrel-mi2077-high-voltage-tester-1419.htm Metrel MI 2077 High Voltage Insulation Tester (Metrel MI 2077 Teraohm 5KV)The Metrel MI 2077 5KV High Voltage Insulation Tester measures Terraohm in a hand held battery powered instrument which has a built in charger for use with rechargeable batteries. Electricians/electrical engineers can use the Metrel MI 2077 High Voltage Insulation Tester for application testing of insulation on: rotating machines, transformers, cables, high voltage generators, electrical circuits, surge arresters, insulation systems, etc.Advanced, field proven instrument. Technical demands require high performance measuring instruments capable of measuring polarization index (PI), dielectric absorption ratio (DAR), dielectric discharge (DD), insulation system capacitance. Easiness of use, low EMI susceptibility and automatic discharge of load after completed measurement are just some of many outstanding features that distinguish the Metrel MI 2077 Diagnostic Insulation Tester from other similar products on the market.Metrel MI 2077 High Voltage Insulation Tester key features: Large custom LCD dot matrix display with bar graph and back light Simultaneous display of measurement parameters Built-in timer and real time clock Guard terminal to eliminate effects of surface leakage current Three safety banana sockets galvanic separated RS 232 port for communication from the Metrel MI 2077 High Voltage Tester to PC 230 V power supply with built-in battery charger for NiMH batteries enables measurement during the charging Simple and fast manipulation Diagnostic test of motor windings 1000 test result storage on Metrel MI 2077 Teraohm 5KV inbuilt memoryMetrel MI 2077 High Voltage Insulation Tester advanced features:High Insulation Resistance measurement: Pre-set DC test voltages 250V 5000V in steps of 50V Measuring range up to 5 Tohms Timer mode from 1 s up to 30 min Capacitance measurement up to 50 MicrofaradStep voltage measurement of Insulation Resistance Pre-set DC test voltage up to 5000V automatically divided in 5 steps Pre-setting of the test time for the voltage stepWithstanding voltage test up to 5500 V Leakage current measurement Ramp mode rising voltage within the selected values Pre-set threshold test current from 1mA to 1.4mA Time programmable step voltage testExternal voltage 0 600 V AC/DC and frequency Automatic discharge of capacitive loadsMetrel MI 2077 High Voltage Insulation Tester standards: Metrel MI 2077 operation: IEC/EN 61557-2 Electromagnetic compatibility: (EMC) EN 61326 Class B Safety: EN 61010-1 (instruments), EN 61010-031 (accessories)Metrel MI 2077 5KV High Voltage Insulation Tester kit includes: Metrel MI2077 High Voltage Insulation Tester (Metrel MI2077 Teraohm 5KV) 2m test lead (red) 2m test lead (black) 2m test lead (green, with alligator clip) Test tip (black) Test tip (red) 2x Alligator clips (black) Mains cable Metrel MI 2077 soft carrying bag Metrel MI 2077 instruction manual Calibration certificate Product verification data FREE PC Software 3 year warranty Insulation / Continuity http://www.pat-services.co.uk/metrel-mi2077-high-voltage-tester-1419.htm http://www.pat-services.co.uk/megger-ltw335-loop-impedance-tester-1417.htm Megger LTW335 Loop Impedance Tester (2 Wire Non tripping + MaxZ + (R1 + R2) + Download)As well as saving time and eliminating the risk of incorrect connections, dependable two wire testing is a major benefit in applications where the neutral is missing or inaccessible, such as light switches, systems with 110V centre-tapped supplies, and many types of luminaire.The new Megger LTW335 Loop Impedance Tester is three phase safe and category IV 300V rated, making it suitable for use on supplies from 50V to 300V AC single phase, as well as on 440V three phase installations.Megger Loop Impedance Testers use the latest digital processing techniques to separate the test signal from the fundamental frequency of the supply. This means the Megger LTW335 Loop Impedance Tester automatically averages a large number of results over the duration of the test. This enables non trip testing to be performed without DC injection, a technique which is, in any case, proving ineffective with electronic RCDs.The entry-level Megger LTW315 Loop Impedance Tester provides all of the facilities needed for two wire non-trip loop testing on supplies between 110V and 280V, while the Megger LTW335 Loop Impedance Tester includes facilities for storing and downloading test results. The Megger LTW425 Loop Impedance Tester allows for high prospective fault calculation. All Megger Loop Testers provide PFC calculation as standard.Megger LTW335 Loop Impedance Tester special features: 2 Wire loop impedance measurement 2 Wire non tripping loop tester 50v to 440v operation 110v centre-tap loop testing CATIV installation testing AUTO start operation 0.01 resolution USB download facilityMegger LTW335 Loop Impedance Tester loop testing: 2 wire non-tripping loop testing 2 wire high current, fast, loop testing 110v to 280v applications 50v to 440v applications Phase to phase testing PFC range 20kA Resolution 0.01 ohm Automatic noise detection Automatic start test Frequency measurement Max Zs display Max R1 + R2 displayMegger LTW335 Loop Impedance Tester features: Backlit display Fold away cover built-in to the Megger LTW335 Loop impedance test quick start guide in cover Test result storage USB Downloading of test results Accepts rechargeable batteriesMegger LTW335 Loop Impedance Tester Loop standards: IEC61010-1 CATIV 300V EN61557 Weather and dust proof to IP54Megger LTW335 Loop Impedance Tester Kit includes: Megger LTW 335 Loop Impedance Tester Megger LTW 335 Loop Tester storage and carry case 2-wire lead set with crocodile clips Mains socket lead set Free calibration certificate 3 year warrantyOther Loop Testers in the LTW series:Megger LTW315, Megger LTW425 Loop and RCD Testers http://www.pat-services.co.uk/megger-ltw335-loop-impedance-tester-1417.htm http://www.pat-services.co.uk/megger-mmc850-multicore-clamp-meter-1415.htm Megger MMC850 Multi-Core Clamp MeterThe Megger MMC850 Multi-Core Clamp Meter offers a unique solution to current measurement in multi-core cables, without the need to split cores. Simply clamp the Megger MMC850 Multi-Core Clamp Meter to a multicore cable and read the current flowing.Use this Megger Clamp Meter anywhere where you want to measure current without breaking a circuit or splitting cables. The Megger MMC850 Multi-Core Clamp Meter can also be used in place of traditional clamp meters, when commissioning, or for general maintenance work in electrical machinery and installations.Megger MMC850 Multi-Core Clamp Meter features: Single, two or three core cable measurement Flat or round section cables No need to split wires Cable centralising clamp Backlit display 50Hz and 60Hz supplies IEC 1010-2-032, CAT III 600 V safety protectionConventional current clamp meters have been available for many years and are an accepted method of non-intrusive current measurement. However these instruments can only measure current in a single core cable, requiring multi-core cables to be split before a core can be measured.Unlike conventional clamp meters, the Megger MMC850 Multi-core Clamp Meter has a complex array of planer magnetic sensor coils to calculate the current flowing in the conductors of multicore cables with either 2 cores or 3 cores, and in either flat or round section cable, up to 100 A. The convenience and potential time saving from using the Megger Multi-Core Clamp is considerable.A single button switches the clamp meter between multi-core and single core operation, ensuring the Megger MMC850 Multi-Core Clamp Meter is the only clamp meter you need to carry.  The inner jaw clamp centralises the cable to be measured ensuring best accuracy.With a tough and lightweight clamp head the Megger MMC850 Multi-Core Clamp Meter allows good access to awkward locations and cables.The Megger MMC850 Clamp Meter is suitable for supply frequencies from 45Hz to 400Hz. Current measurement to 200 A on single core and 100 A on multi-core cables is possible, with a resolution to 0.1 A, so covering the majority of power applications including Military/Aviation.Megger MMC850 Multi-Core Clamp Meter kit includes: Megger MMC 850 Multi-Core Clamp Meter Carry case Megger MMC 850 user guideOther Megger Clamp Meters:Megger DCM310, Megger DCM320, Megger DCM330, Megger DCM340 Current Clamps Meters http://www.pat-services.co.uk/megger-mmc850-multicore-clamp-meter-1415.htm http://www.pat-services.co.uk/megger-dcm340-clamp-meter-multimeter-1413.htm Megger DCM340 Clamp MeterThe Megger DCM340 Clamp Meter is a highly versatile instrument and ideal for use in the installation, maintenance, monitoring or checking of A.C. or D.C. electrical systems and equipment.Capable of measuring A.C. and D.C. current up to 600A; A.C. and D.C. voltage up to 600V; resistance up to 400 ohms; and frequency up to 400 Hz, the Megger DCM340 Clamp Meter is the most versatile in the range. Current measurement combined with the comprehensive and accurate multimeter functions of the Megger DCM340 Clamp Meter eliminate the need to carry around both a clamp meter and multimeter this instrument does it all.The Megger DCM340 Clamp Meter is designed to be used on electrical systems and equipment where there is a need to measure current, volts, resistance and frequency. It is therefore intended for use while installing, maintaining, fault-finding or monitoring those systems.Megger DCM340 Clamp Meter features: D.C. and A.C. current and voltage 600A and 600v Resistance and continuity 3 1/2 digit, 4000 count display with backlight High resolution digital bargraph Peak, min/max (if an A.C. signal at 10ms sample rate) and data-hold functionsThe large clear digits of the Megger DCM340 Clamp Meters numeric display are complemented by the high-resolution digital bar graph, useful for indicating trending and fluctuation of measurement. Using the Relative mode (REL), a stable value can be stored, the instrument zeroed at that point, and then any variation from that value is displayed as a direct measurement relative to it.The Megger DCM340 Clamp Meter is safety rated to IEC 61010-1 Cat III 600 V, and is drop-tested to 1.2 m onto a hard floor.Megger DCM340 Clamp Meter kit includes: Megger DCM 340 Clamp Meter Batteries Pouch Test leads Megger DCM340 user guide 1 year warrantyOther Megger Clamp Meters:Megger DCM310, Megger DCM320, Megger DCM330, Megger MMC850 Digital Multimeters http://www.pat-services.co.uk/megger-dcm340-clamp-meter-multimeter-1413.htm http://www.pat-services.co.uk/megger-dcm330-fork-multimeter-clamp-1411.htm Megger DCM330 Fork MultimeterThe Megger DCM330 Fork Multimeter is a convenient, compact instrument designed to measure A.C. current up to 200A, and perform the basic functions of a basic multimeter. With A.C. and D.C. voltage measurements up to 1000v and resistance measurements up to 20 Mohms, a non-contact voltage detection facility and a continuity buzzer with diode check, the Megger DCM330 Fork Multimeter is a truly versatile instrument. All of these features combined into a single compact instrument eliminate the need for separate multimeter and clampmeter.Megger DCM330 Fork Multimeter features: Compact pocket sized design Auto power-off 200.0A A.C. open jaw current measurement 0.1v to 1000v auto-ranging ac and dc voltage measurement 0.1 ohms to 20.00 Mohms resistance range Continuity buzzer and diode check Non-contact detection of AC voltage CAT III 1000V and CAT IV 600 V 250 hour operation from 2 AA batteries 3 digit display with holdThe open-jaw design of the Megger DCM330 Clamp Meter enable simple and fast measurements to be made on single conductors up to 16mm diameter. It provides average responding RMS values, and with the conductor(s) positioned centrally and squarely within the jaws, achieves readings of better than 3% accuracy.The Megger DCM330 Multimeter is auto-ranging on all ranges. Current measurement and the non-contact voltage sensor do not need the test leads; all other functions will require their use.Voltage detection function on the Megger DCM330 Fork Multimeter can identify the presence of live AC voltages from 50 V to 1000 V at 50 to 500 Hz. It is operational on any range including OFF. Voltage is capacitively detected, signalled by a tone sounding and the illumination of a red LED situated below the clamp meter head.The tough body provides easy and comfortable grip, providing durability while stored in a tool box or pocket. The Megger DCM330 Fork Multimeter is designed to withstand a 1.22m (4 feet) drop without damage.Megger DCM330 Fork Multimeter kit includes: Megger DCM330 Fork Multimeter Batteries Pouch Test leads Megger DCM330 user guide 1 year warrantyOther Megger Clamp Meters:Megger DCM310, Megger DCM320, Megger DCM340, Megger MMC850 Digital Multimeters http://www.pat-services.co.uk/megger-dcm330-fork-multimeter-clamp-1411.htm http://www.pat-services.co.uk/megger-dcm320-clamp-meter-1409.htm Megger DCM320 Clamp MeterThe Megger DCM320 Clamp Meter is ideal for use during the installation, maintenance and checking of electrical systems and equipment. Ideal for use by anyone working on basic electrical systems or equipment, the Megger DCM320 Clamp Meter is suitable for the majority of applications encountered by the electrical contractor.Megger DCM320 Clamp Meter features: Measures up to 400A A.C. with low current ranges for improved resolution Continuity Buzzer Auto ranging Auto off IEC61010 CAT III 600v Data Hold Compact pocket-size design Exceptional battery lifetime 20 Mohms resistance 600v A.C./D.C.The Megger DCM320 Clamp Meter will measure A.C. current (50 - 60 Hz) up to 400A, with a data-hold feature to freeze the displayed value for use in confined situations where the display may be difficult to read.A benefit of the Megger DCM320 Clamp Meter is the ability to measure ranges for A.C. and D.C. voltages up to 600v, and resistance up to 20 Mohms, via the terminals and supplied test leads. It also has a continuity buzzer that operates up to 20 ohms.Safety rated to IEC 61010 CAT III 600v, the Megger DCM320 Clamp Meter offers high levels of protection to the operator. A carrying case is included, but even without the case, this Megger Clamp Meter is rated to withstand a 1.2 m drop onto a hard surface without damage.The Megger DCM320 Clamp Meters compact clamp jaw enables cables to be measured as large as 27 mm diameter, so covering the majority of applications within the electrical system installation industry.Megger DCM320 Clamp Meter kit includes: Megger DCM 320 Clamp Meter Batteries Pouch Test leads Megger DCM320 user guide 1 year warrantyOther Megger Clamp Meters:Megger DCM310, Megger DCM330, Megger DCM340, Megger MMC850 Current Clamps Meters http://www.pat-services.co.uk/megger-dcm320-clamp-meter-1409.htm http://www.pat-services.co.uk/megger-dcm310-clamp-meter-1407.htm Megger DCM310 Clamp MeterThe Megger DCM310 Clamp Meter is ideal for use during the installation, maintenance and checking of electrical systems and equipment. Ideal for use by anyone working on basic electrical systems or equipment, the Megger DCM310 Clamp Meter is suitable for the majority of applications encountered by the electrical contractor.Megger DCM310 Clamp Meter features: Measures up to 400A A.C. with low current ranges for improved resolution Max Hold IEC61010 CAT III 600v Data Hold Compact pocket-size design Exceptional battery lifetimeThe Megger DCM310 Clamp Meter will measure A.C. current (50 - 60 Hz) up to 400A, with a data-hold feature to freeze the displayed value for use in confined situations where the display may be difficult to read. Another feature of the Megger DCM310 Clamp Meter is the max-hold button which is used to automatically store and display the maximum value measured over a period of time.Safety rated to IEC 61010 CAT III 600v, the Megger DCM310 Clamp Meter offers high levels of protection to the operator. A carrying case is included, but even without the case, this Megger Clamp Meter is rated to withstand a 1.2 m drop onto a hard surface without damage.The Megger DCM310 Clamp Meters compact clamp jaw enables cables to be measured as large as 27 mm diameter, so covering the majority of applications within the electrical system installation industry.Megger DCM310 Clamp Meter kit includes: Megger DCM 310 Clamp Meter Batteries Pouch Megger DCM310 user guide 1 year warrantyOther Megger Clamp Meters:Megger DCM320, Megger DCM330, Megger DCM340, Megger MMC850 Current Clamps Meters http://www.pat-services.co.uk/megger-dcm310-clamp-meter-1407.htm http://www.pat-services.co.uk/megger-m8037-digital-multimeter-1405.htm Megger M8037 Digital MultimeterThe Megger M8037 Digital Multimeter is an advanced digital multimeter and uses the latest microprocessor technology to provide the most comprehensive measuring ranges and features in a hand held instrument.As with all Meggers, the Megger M8037 Digital Multimeter offers rugged dependability for use in field conditions. This Megger digital multimeter is supplied in a rugged yellow case with a wrap around rubberised holster for added protection against mishandling. The Megger M8037 Digital Multimeter has an accuracy of of 0.08%, dual display and the choice of operation in the 4,000 count or the higher resolution 40,000 count mode.This is Meggers top of the range digital multimeter. The Megger M8037 Digital Multimeter measures True RMS, A.C. + D.C. and A.C. voltage ranges, which more accurately measure voltage values regardless of the waveforms. Square, sawtooth, triangle, pulse trains, spikes as well as distorted waveforms with the presence of harmonics can all be measured accurately.The Megger M8037 Digital Multimeter is a uniquely flexible instrument, ideal for use in the workshop and in the field, but also suitable for the laboratory. The precision of the digital reading, combined with the ability to follow trends on the analogue scale, ensures that the technician or engineer is fully equipped for all testing requirements with just one instrument.Megger M8037 Digital Multimeter features: Analogue Bargraph Updates 128 times every second True RMS D.C. + A.C. and Average Responding Backlit display Basic Accuracy 0.08% Voltage measurement Record Max, Min, Max-Min Average Fast 150 μs Audible Continuity Test - The audible continuity test is a quick go/no-go test that distinguishes between an open and a closed circuit. Data Store & Recall (MEM) - Stores the whole display data in the Megger M8037 Digital Multimeter memory for later recall 4,000 & 40,000 Count - Fast 33⁄4 digit 4,000 count display updates 5 times per second (nominally). The user-selected 10 x higher resolution mode 43⁄4 digit count display updates approximately every 3⁄4 s, and is available in most measurement functions. Dual Display - Using this feature one can simultaneously display a.c. volts + frequency, a.c. amps + frequency, conductance + resistance, duty cycle + frequency, dbm + frequency and values + events. Relative Functions - There are three different relative modes to choose from; Relative Zero, Relative Percentage and Relative per Unit.Megger M8037 Digital Multimeter kit includes: Megger M8037 Digital Multimeter Test leads and probes Protective holster 9v alkaline battery Megger M8037 user guide 3 year warrantyOther Megger Digital Multimeters:Megger AVO310, Megger M7029 Digital Multimeters http://www.pat-services.co.uk/megger-m8037-digital-multimeter-1405.htm http://www.pat-services.co.uk/megger-m7029-digital-multimeter-1403.htm Megger M7029 Digital MultimeterThe Megger M7029 Digital Multimeter is an advanced digital multimeter and uses the latest microprocessor technology to provide the most comprehensive measuring ranges and features in a hand held instrument.As with all Meggers, the Megger M7029 Digital Multimeter offers rugged dependability for use in field conditions. This Megger digital multimeter is supplied in a rugged yellow case with a wrap around rubberised holster for added protection against mishandling. The Megger M7029 Digital Multimeter has an accuracy of of 0.2%, dual display and the choice of operation in the 4,000 count or the higher resolution 40,000 count mode.The Megger M7029 Digital Multimeter is a uniquely flexible instrument, ideal for use in the workshop and in the field, but also suitable for the laboratory. The precision of the digital reading, combined with the ability to follow trends on the analogue scale, ensures that the technician or engineer is fully equipped for all testing requirements with just one instrument.Megger M7029 Digital Multimeter features: Analogue Bargraph Updates 128 times every second Average Responding Basic Accuracy 0.2% Record Max, Min, Max-Min Average Fast 150 μs Audible Continuity Test - The audible continuity test is a quick go/no-go test that distinguishes between an open and a closed circuit. Data Store & Recall (MEM) - Stores the whole display data in the Megger M7029 Digital Multimeter memory for later recall 4,000 & 40,000 Count - Fast 33⁄4 digit 4,000 count display updates 5 times per second (nominally). The user-selected 10 x higher resolution mode 43⁄4 digit count display updates approximately every 3⁄4 s, and is available in most measurement functions. Dual Display - Using this feature one can simultaneously display a.c. volts + frequency, a.c. amps + frequency, conductance + resistance, duty cycle + frequency, dbm + frequency and values + events. Relative Functions - There are three different relative modes to choose from; Relative Zero, Relative Percentage and Relative per Unit.Megger M7029 Digital Multimeter kit includes: Megger M7029 Digital Multimeter Test leads and probes Protective holster 9v alkaline battery Megger M7029 user guide 3 year warrantyOther Megger Digital Multimeters:Megger AVO310, Megger M8037 Digital Multimeters http://www.pat-services.co.uk/megger-m7029-digital-multimeter-1403.htm http://www.pat-services.co.uk/megger-avo310-digital-multimeter-1401.htm Megger AVO310 Digital MultimeterThe Megger AVO310 Digital Multimeter is a tough and compact digital multimeter designed for the contracting electrician, but is also suitable for a wide range of applications and users. This digital multimeter offers a range of measurement modes for AC and DC applications, resistance and current measurement.As with most items in the Megger range, the Megger AVO310 Digital Multimeter has a tough rubber armoured case, offering the maximum amount of protection from the extreme use found in modern industrial environments.The Megger AVO310 Digital Multimeter is not burdened with functions that never get used. This keeps the instrument simple to operate without the continued need to refer to the user manual.Megger AVO310 Digital Multimeter features: Fully auto ranging Large clear display with backlight. Separate battery and fuse cover Mode button to switch between AC or DC measurement Suitable for applications to CATIII 600 V and fully IEC 61010 compliant Min/Max store the Megger AVO310 Digital Multimeter stores the maximum and minimum measurements on screen Data hold results will be held on the Megger AVO310 Digital Multimeter displayVoltage measurementBoth AC and DC voltage measurement is possible with the Megger AVO310 Digital Multimeter auto ranging to match the voltage at the test probes.Voltage measurements up to 1000V are permitted without damage to the Megger multimeter.Current measurementThree ranges are provided for current measurement of either AC or DC current from 0.1uA to 10A. Fused inputs protect both the user and the Megger AVO310 Digital Multimeter in the case of excess current.Resistance, continuity and diode testingResistance can be measured directly on the ohms range from 0 ohms up to 1.999 Mohms. A continuity buzzer range is also available for checking low resistance between two points. The buzzer sounding if the resistance is less than 50ohms (35ohms on the AVO310). Additionally a diode range exists for testing forward and reverse bias operation of transistors and diodes.Additional Megger AVO310 Digital Multimeter featuresA low battery indicator warns when batteries are low, and an auto-off function ensures no unnecessary battery wastage occurs if accidentally left on. A built-in rear stand provides both a bench stand for comfortable use on the bench, as well as extending round 180 to act as a hanging bracket.Megger AVO310 Digital Multimeter kit includes: Megger AVO 310 Digital Multimeter Test leads and probes 3 year warrantyOther Megger Digital Multimeters:Megger M7029, Megger M8037 Digital Multimeters http://www.pat-services.co.uk/megger-avo310-digital-multimeter-1401.htm http://www.pat-services.co.uk/megger-cm500-multifunction-installation-tester-1399.htm Megger CM500 Multifunction Installation TesterThe Megger CM500 Multifunction Installation Tester is a compact product tester that combines all the functions required to fully test domestic, commercial and industrial fixed wiring. The Megger CM500 Multifunction Tester is the first Installation Tester with a non tripping loop test guaranteed not to trip any RCD rated 30 mA or above. Tests on the Megger CM500 are carried out in accordance with International Standards, 17th Edition National Wiring Regulations BS7671:2008 and Euro Standard EN61557. With a large memory and storage capability, the Megger CM500 Multifunction Tester offers the ability to display, download and print data on site.Test lead resistances can be nulled and a continuity buzzer is incorporated for rapid identification of open and short circuits. The Megger CM500 Multifunction Installation Tester has settable automatic polarity reversal and result averaging. Auto-ranging earth resistance function enables measurement of earth electrode resistance on TT systems.Loop tests on the Megger CM500 Installation Tester are performed to a resolution of 0,01 ohms with direct display of PEFC and PSCC. This Multifunction Tester has a unique low current loop test with 0,1 ohms resolution for testing circuits protected by an RCD rated at 30mA or above, without tripping the RCD, including the newer electronic ones.The Megger CM500 Multifunction Tester offers verification of the correct operation of RCDs rated between 10mA and 1000mA with trip timing up to 2000ms. A ramp test indicates actual trip current to aid in fault diagnosis and variable test current function enabling the testing of programmable and specialist devices.Upon connecting the Megger CM500 Multifunction Installation Tester to the mains supply the polarity and voltage are displayed to show correct wiring of the socket under test and warn of live voltages. Supply frequency is indicated at the touch of a button.Megger CM500 Multifunction Installation Tester features: Storage of approximately 750 test results on the Megger Installation Tester internal memory Recall of test results to Megger Multifunction Tester display Connect to IBM compatible PC for storage of results Ramp Test for measuring RCD actual trip currents Variable RCD test current for programmable devices Insulation tests at 250v, 500v & 1000v with 1mA output Continuity tests with 200mA short circuit capability Phase-Phase, Phase-Neutral, Phase-Earth Loop Tests High current Loop Testing with 0,01 ohms resolution Prospective Earth Fault and Short Circuit Current Low current Loop Test for non-tripping of RCDs Earth Electrode Resistance Test for simple systems No-trip, Trip and Fast Trip RCD testing Tests D.C. Sensitive, Selective and General Type RCDs Supply voltage, polarity and frequency indication Direct serial printer output via the Megger CM500 Multifunction Tester RS232 port Meets or exceeds the requirements of EN61010-1 Category III 480 V (max) phase-phaseMegger CM500 Multifunction Installation Tester kit includes: Megger CM 500 Multifunction Installation Tester Megger CM 500 instruction book Mains lead 2 wire test lead Megger CM500 carry pouch and carry strap Crocodile clips 3 year warranty Installation Testers http://www.pat-services.co.uk/megger-cm500-multifunction-installation-tester-1399.htm http://www.pat-services.co.uk/megger-mtk330-electrical-test-kit-1397.htm Megger MTK330 Electrical Test KitThe Megger MTK330 Electrical Test Kit covers all the 17th Edition test requirements of an electrical engineer performing electrical inspection and testing on domestic, commercial and industrial installations for single and three phase applications.Megger MTK330 Electrical Test Kit consist of three instruments: Megger MIT330 Insulation and Continuity Tester with insulation and continuity limit alarms, storage and downloading Megger LTW335 2 Wire Earth Loop Tester with R1+R2 and MaxZ measurement, storage and downloading Megger RCDT330 RCD Tester with programmable RCD testing capability, storage and downloading(see datasheet for specifications)Megger MTK330 Electrical Test Kit features: Rubber armoured instruments Weatherproof IP54All instruments and test leads of the Megger MTK330 Electrical Test Kit are housed in a smart briefcase. In addition all instruments are supplied with Megger calibration certificates and batteries are already fitted.The Megger MIT330 Insulation and Continuity Tester, Megger LTW335 2 Wire Earth Loop Tester and Megger RCDT330 RCD Tester are covered by a full three year warranty. Each instrument in the Megger MTK330 Electrical Installation Test Kit is suitable for electrical installations to BS7671:2008, the 17th Edition Wiring Regulations and international electrical testing.All instruments meet the requirements of EN61557 as well as the safety standard IEC61010-1.Megger MTK330 Electrical Test Kit Includes: Megger MIT330 Insulation and Continuity Tester Megger LTW335 2 Wire Earth Loop Tester Megger RCDT330 RCD Tester Test leads Batteries Megger MTK330 hard briefcase Calibration certificates 3 year warranty Insulation / Continuity http://www.pat-services.co.uk/megger-mtk330-electrical-test-kit-1397.htm http://www.pat-services.co.uk/megger-mtk320-electrical-test-kit-1395.htm Megger MTK320 Electrical Test KitThe Megger MTK320 Electrical Test Kit covers all the 17th Edition test requirements of an electrical engineer performing electrical inspection and testing on domestic, commercial and industrial installations for single and three phase applications.Megger MTK320 Electrical Test Kit consist of three instruments: Megger MIT320 Insulation and Continuity Tester with insulation and continuity limit alarms Megger LTW325 2 Wire Earth Loop Tester with R1+R2 and MaxZ measurement Megger RCDT320 RCD Tester with programmable RCD testing capability(see datasheet for specifications)Megger MTK320 Electrical Test Kit features: Rubber armoured instruments Weatherproof IP54All instruments and test leads of the Megger MTK320 Electrical Test Kit are housed in a smart briefcase. In addition all instruments are supplied with Megger calibration certificates and batteries are already fitted.The Megger MIT320 Insulation and Continuity Tester, Megger LTW325 2 Wire Earth Loop Tester and Megger RCDT320 RCD Tester are covered by a full three year warranty. Each instrument in the Megger MTK320 Electrical Installation Test Kit is suitable for electrical installations to BS7671:2008, the 17th Edition Wiring Regulations and international electrical testing.All instruments meet the requirements of EN61557 as well as the safety standard IEC61010-1.Megger MTK320 Electrical Test Kit Includes: Megger MIT320 Insulation and Continuity Tester Megger LTW325 2 Wire Earth Loop Tester Megger RCDT320 RCD Tester Test leads Batteries Megger MTK320 hard briefcase Calibration certificates 3 year warranty Insulation / Continuity http://www.pat-services.co.uk/megger-mtk320-electrical-test-kit-1395.htm http://www.pat-services.co.uk/megger-mtk310-electrical-test-kit-1393.htm Megger MTK310 Electrical Test KitThe Megger MTK310 Electrical Test Kit covers all the 17th Edition test requirements of an electrical engineer performing electrical inspection and testing on domestic, commercial and industrial installations for single and three phase applications.Megger MTK310 Electrical Test Kit consist of three instruments: Megger MIT310 Insulation and Continuity Tester Megger LTW315 2 Wire Earth Loop Tester Megger RCDT310 RCD Tester(see datasheet for specifications)Megger MTK310 Electrical Test Kit features: Rubber armoured instruments Weatherproof IP54All instruments and test leads of the Megger MTK310 Electrical Test Kit are housed in a smart briefcase. In addition all instruments are supplied with Megger calibration certificates and batteries are already fitted.The Megger MIT310 Insulation and Continuity Tester, Megger LTW315 2 Wire Earth Loop Tester and Megger RCDT310 RCD Tester are covered by a full three year warranty. Each instrument in the Megger MTK310 Electrical Installation Test Kit is suitable for electrical installations to BS7671:2008, the 17th Edition Wiring Regulations and international electrical testing.All instruments meet the requirements of EN61557 as well as the safety standard IEC61010-1.Megger MTK310 Electrical Test Kit Includes: Megger MIT310 Insulation and Continuity Tester Megger LTW315 2 Wire Earth Loop Tester Megger RCDT310 RCD Tester Test leads Batteries Megger MTK310 hard briefcase Calibration certificates 3 year warranty Insulation / Continuity http://www.pat-services.co.uk/megger-mtk310-electrical-test-kit-1393.htm http://www.pat-services.co.uk/megger-ppk220-part-p-kit-1391.htm Megger PPK220 Part P KitFrom 2005 the Part P addition to the Building regulations became law. All new domestic installations and modifications to existing wiring, with few exceptions, will require testing by suitably qualified installers.The Part P Building Regulations requirement is that Reasonable provision shall be made in the design and installation of electrical installations in order to protect persons operating, maintaining or altering the installations from fire or injury. And Sufficient information shall be provided so that persons wishing to operate, maintain or alter an electrical installation can do so with reasonable care.Megger MIT320 Insulation and Continuity Tester & Megger LRCD220 Loop and RCD TesterThe PPK220 Megger Part P Kit includes a new Megger LRCD220 Loop and RCD Tester with a Megger MIT320 Insulation and Continuity Tester to offer customers a choice of test instruments that meet all the requirements of domestic premise testing under Part P, as well as BS7671 17th Edition Wiring Regulations. Two separate instruments allows dead testing (Continuity and Insulation) to be separated from live testing (Loop and RCD).Megger PPK220 Part P Kit advantages: Separate installations can be tested simultaneously Simplified instrument operation Instruments can be updated or replaced separately Accidental damage to an instrument does not prevent work continuingMegger PPK220 Part P Kit includes: Megger MIT320 Insulation and Continuity Tester(in addition to Megger MIT310)- Buzzer disable- Continuity limit alarm- Insulation limit alarm- Frequency measurement- Resistance measurement- Backlit display- Backlit ranges- Remote switch probe Megger LRCD220 Loop and RCD Tester(in addition to Megger LRCD220)- Auto RCD testing- 1000mA RCD test capability- Phase to phase loop testing- Phase rotation display Megger calibration certificate Full set of test leads PPK220 instrument and carry case Batteries 3 year warranty Loop and RCD Testers http://www.pat-services.co.uk/megger-ppk220-part-p-kit-1391.htm http://www.pat-services.co.uk/megger-ppk210-part-p-kit-1389.htm Megger PPK210 Part P KitFrom 2005 the Part P addition to the Building regulations became law. All new domestic installations and modifications to existing wiring, with few exceptions, will require testing by suitably qualified installers.The Part P Building Regulations requirement is that Reasonable provision shall be made in the design and installation of electrical installations in order to protect persons operating, maintaining or altering the installations from fire or injury. And Sufficient information shall be provided so that persons wishing to operate, maintain or alter an electrical installation can do so with reasonable care.Megger MIT310 Insulation and Continuity Tester & Megger LRCD210 Loop and RCD TesterThe PPK210 Megger Part P Kit includes a new Megger LRCD210 Loop and RCD Tester with a Megger MIT310 Insulation and Continuity Tester to offer customers a choice of test instruments that meet all the requirements of domestic premise testing under Part P, as well as BS7671 17th Edition Wiring Regulations. Two separate instruments allows dead testing (Continuity and Insulation) to be separated from live testing (Loop and RCD).Megger PPK210 Part P Kit advantages: Separate installations can be tested simultaneously Simplified instrument operation Instruments can be updated or replaced separately Accidental damage to an instrument does not prevent work continuingMegger PPK210 Part P Kit includes: Megger MIT310 Insulation and Continuity Tester - 250v insulation testing (SELV & PELV)- 500v insulation testing - 1000v insulation testing - 1000 Mohms range - Test lock - Auto circuit discharge - 200mA continuity testing - Fast continuity buzzer - Test lead null store - Live circuit test protection- Voltage measurement Megger LRCD210 Loop and RCD Tester- Non-tripping loop test- PFC calculation and display from the loop test measurement- Supply voltage display on connection to circuit- Supply frequency measurement- 10mA to 500mA RCDs- 1/2I, I & 5I RCD testing- RCD ramp testing- AC, AC selective, DC and DC selective RCD types- Voltage measurement Megger calibration certificate Full set of test leads PPK210 instrument and carry case Batteries 3 year warranty Insulation / Continuity http://www.pat-services.co.uk/megger-ppk210-part-p-kit-1389.htm http://www.pat-services.co.uk/megger-ltw425-loop-impedance-tester-1387.htm Megger LTW425 Loop Impedance Tester (2 Wire Non tripping + MaxZ + (R1 + R2) + 0.001 ohms)As well as saving time and eliminating the risk of incorrect connections, dependable two wire testing is a major benefit in applications where the neutral is missing or inaccessible, such as light switches, systems with 110V centre-tapped supplies, and many types of luminaire.The new Megger LTW425 Loop Impedance Tester is three phase safe and category IV 300V rated, making it suitable for use on supplies from 50V to 300V AC single phase, as well as on 440V three phase installations.Megger Loop Impedance Testers use the latest digital processing techniques to separate the test signal from the fundamental frequency of the supply. This means the Megger LTW425 Loop Impedance Tester automatically averages a large number of results over the duration of the test. This enables non trip testing to be performed without DC injection, a technique which is, in any case, proving ineffective with electronic RCDs.The entry-level Megger LTW315 Loop Impedance Tester provides all of the facilities needed for two wire non-trip loop testing on supplies between 110V and 280V, while the Megger LTW335 Loop Impedance Tester includes facilities for storing and downloading test results. The Megger LTW425 Loop Impedance Tester allows for high prospective fault calculation. All Megger Loop Testers provide PFC calculation as standard.Megger LTW425 Loop Impedance Tester special features: 2 Wire loop impedance measurement 2 Wire non tripping loop tester 50v to 440v operation 110v centre-tap loop testing CATIV installation testing AUTO start operation 0.001 resolutionMegger LTW425 Loop Impedance Tester loop testing: 2 wire non-tripping loop testing 2 wire high current, fast, loop testing 110v to 280v applications 50v to 440v applications Phase to phase testing PFC range 20kA PFC range 40kA Resolution 0.01 ohm Resolution 0.001 ohm Automatic noise detection Automatic start test Frequency measurement Max Zs display Max R1 + R2 displayMegger LTW425 Loop Impedance Tester features: Backlit display Fold away cover built-in to the Megger LTW425 Loop impedance test quick start guide in cover Accepts rechargeable batteriesMegger LTW425 Loop Impedance Tester Loop standards: IEC61010-1 CATIV 300V EN61557 Weather and dust proof to IP54Megger LTW425 Loop Impedance Tester Kit includes: Megger LTW 425 Loop Impedance Tester Megger LTW 425 Loop Tester storage and carry case 2-wire lead set with crocodile clips Mains socket lead set Free calibration certificate 3 year warrantyOther Loop Testers in the LTW series:Megger LTW315, Megger LTW335 Loop and RCD Testers http://www.pat-services.co.uk/megger-ltw425-loop-impedance-tester-1387.htm http://www.pat-services.co.uk/megger-ltw315-loop-impedance-tester-1385.htm Megger LTW315 Loop Impedance Tester (2 Wire Non tripping)As well as saving time and eliminating the risk of incorrect connections, dependable two wire testing is a major benefit in applications where the neutral is missing or inaccessible, such as light switches, systems with 110V centre-tapped supplies, and many types of luminaire.The new Megger LTW315 Loop Impedance Tester is three phase safe and category IV 300V rated, making it suitable for use on supplies from 50V to 300V AC single phase, as well as on 440V three phase installations.Megger Loop Impedance Testers use the latest digital processing techniques to separate the test signal from the fundamental frequency of the supply. This means the Megger LTW315 Loop Impedance Tester automatically averages a large number of results over the duration of the test. This enables non trip testing to be performed without DC injection, a technique which is, in any case, proving ineffective with electronic RCDs.The entry-level Megger LTW315 Loop Impedance Tester provides all of the facilities needed for two wire non-trip loop testing on supplies between 110V and 280V, while the Megger LTW335 Loop Impedance Tester includes facilities for storing and downloading test results. The Megger LTW425 Loop Impedance Tester allows for high prospective fault calculation. All Megger Loop Testers provide PFC calculation as standard.Megger LTW315 Loop Impedance Tester special features: 2 Wire loop impedance measurement 2 Wire non tripping loop tester 50v to 440v operation 110v centre-tap loop testing CATIV installation testing AUTO start operation 0.01 resolutionMegger LTW315 Loop Impedance Tester loop testing: 2 wire non-tripping loop testing 2 wire high current, fast, loop testing PFC range 20kA Resolution 0.01 ohm Automatic noise detection Automatic start test Frequency measurementMegger LTW315 Loop Impedance Tester features: Backlit display Fold away cover built-in to the Megger LTW315 Loop impedance test quick start guide in cover Accepts rechargeable batteriesMegger LTW315 Loop Impedance Tester Loop standards: IEC61010-1 CATIV 300V EN61557 Weather and dust proof to IP54Megger LTW315 Loop Impedance Tester Kit includes: Megger LTW 315 Loop Impedance Tester Megger LTW 315 Loop Tester storage and carry case 2-wire lead set with crocodile clips Mains socket lead set Free calibration certificate 3 year warrantyOther Loop Testers in the LTW series:Megger LTW335, Megger LTW425 Loop and RCD Testers http://www.pat-services.co.uk/megger-ltw315-loop-impedance-tester-1385.htm http://www.pat-services.co.uk/6-piece-1000v-screwdriver-set-1383.htm Kew Technik 6 Piece 1000V Screwdriver Set (KTK 0406A)Kew Technik offer a range of heavy duty 1000V electrician screwdrivers. Each screwdriver has a composite handle which is designed for non-slip safety and superb control and comfort in the hand. They also come with Chrome Molybdenum shafts with magnetic, corrosion resistant tips.1000V Screwdriver features: Power Grip handles for ultimate comfort, power and control Chrome Molybdenum screwdriver shafts Magnetic, corrosion resistant tips VDE verified Approved by TUV / GS to European standard EN 60900 Specially designed impact resistant screwdriver handles Designed for maximum torque transfer and roll resistance Suitable for live working up to 1000 volts AC Recessed fingerstops to prevent slipping6 Piece 1000V Screwdriver Kit with Power GripComfort, control and quality. Tip head clearly marked on handle of screwdriver no more fumbling in tool boxes!6 Piece 1000V Screwdriver Set includes: 6.5mm 5.5mm Pozi 2 Pozi 1 4mm 3.5mm 1000V Insulated Electrical Tools http://www.pat-services.co.uk/6-piece-1000v-screwdriver-set-1383.htm http://www.pat-services.co.uk/8-piece-1000v-screwdriver-set-1381.htm Kew Technik 8 Piece 1000V Screwdriver Set (KTK 0408A)Kew Technik offer a range of heavy duty 1000V electrician screwdrivers. Each screwdriver has a composite handle which is designed for non-slip safety and superb control and comfort in the hand. They also come with Chrome Molybdenum shafts with magnetic, corrosion resistant tips.1000V Screwdriver features: Power Grip handles for ultimate comfort, power and control Chrome Molybdenum screwdriver shafts Magnetic, corrosion resistant tips VDE verified Approved by TUV / GS to European standard EN 60900 Specially designed impact resistant screwdriver handles Designed for maximum torque transfer and roll resistance Suitable for live working up to 1000 volts AC Recessed fingerstops to prevent slipping8 Piece 1000V Screwdriver Kit with Power GripComfort, control and quality. Tip head clearly marked on handle of screwdriver no more fumbling in tool boxes!8 Piece 1000V Screwdriver Set includes: 6.5mm 5.5mm Phillips 2 Pozi 2 Phillips 1 Pozi 1 4mm 3.5mm 1000V Insulated Electrical Tools http://www.pat-services.co.uk/8-piece-1000v-screwdriver-set-1381.htm http://www.pat-services.co.uk/160mm-wire-stripping-pliers-1000v-1379.htm Kew Technik 160mm Wire Stripping Pliers (ESS 0406A)Kew Technik offer a range of 1000V electrical pliers, including Combination Pliers, Long Nose Pliers, Cutting Pliers and Stripping Pliers. They are all manufactured to exacting Euronorm Standards IEC 900, EN 60900 for SAFE 1000V working and are VDE certified.160mm Wire Stripping Pliers with Power GripHigh comfort hand guards stop hand slipping onto live conductors. Composite handles are designed for non-slip safety and superb control and comfort in the hand.160mm Wire Stripping Pliers Specification:Overall Length: 160mm, 6 1/4 inHead Length: 50mm, 2 inWeight: 200g, 7 oz 1000V Insulated Electrical Tools http://www.pat-services.co.uk/160mm-wire-stripping-pliers-1000v-1379.htm http://www.pat-services.co.uk/high-leverage-cutter-pliers-1000v-1377.htm Kew Technik 180mm High Leverage Side Cutter Pliers (ESC 0407A)Kew Technik offer a range of 1000V electrical pliers, including Combination Pliers, Long Nose Pliers, Cutting Pliers and Stripping Pliers. They are all manufactured to exacting Euronorm Standards IEC 900, EN 60900 for SAFE 1000V working and are VDE certified.180mm High Leverage Side Cutter Pliers with Power GripHigh comfort hand guards stop hand slipping onto live conductors. Composite handles are designed for non-slip safety and superb control and comfort in the hand. A high pivot for greater leverage means greater cutting power!180mm High Leverage Side Cutter Pliers Specification:Overall Length: 180mm, 7 inHead Length: 55mm, 2 1/4 inWeight: 250g, 9 oz 1000V Insulated Electrical Tools http://www.pat-services.co.uk/high-leverage-cutter-pliers-1000v-1377.htm http://www.pat-services.co.uk/200mm-diagonal-cutting-pliers-1000v-1375.htm Kew Technik 200mm Diagonal Cutting Pliers (ESC 0408A)Kew Technik offer a range of 1000V electrical pliers, including Combination Pliers, Long Nose Pliers, Cutting Pliers and Stripping Pliers. They are all manufactured to exacting Euronorm Standards IEC 900, EN 60900 for SAFE 1000V working and are VDE certified.200mm Diagonal Cutting Pliers with Power GripHigh comfort hand guards stop hand slipping onto live conductors. Composite handles are designed for non-slip safety and superb control and comfort in the hand.200mm Diagonal Cutting Pliers Specification:Overall Length: 200mm, 8 inHead Length: 70mm, 2 3/4 inWeight: 300g, 10 1/2 oz 1000V Insulated Electrical Tools http://www.pat-services.co.uk/200mm-diagonal-cutting-pliers-1000v-1375.htm http://www.pat-services.co.uk/160mm-diagonal-cutting-pliers-1000v-1373.htm Kew Technik 160mm Diagonal Cutting Pliers (ESC 0406A)Kew Technik offer a range of 1000V electrical pliers, including Combination Pliers, Long Nose Pliers, Cutting Pliers and Stripping Pliers. They are all manufactured to exacting Euronorm Standards IEC 900, EN 60900 for SAFE 1000V working and are VDE certified.160mm Diagonal Cutting Pliers with Power GripHigh comfort hand guards stop hand slipping onto live conductors. Composite handles are designed for non-slip safety and superb control and comfort in the hand.160mm Diagonal Cutting Pliers Specification:Overall Length: 200mm, 8 inHead Length: 70mm, 2 3/4 inWeight: 300g, 10 1/2 oz 1000V Insulated Electrical Tools http://www.pat-services.co.uk/160mm-diagonal-cutting-pliers-1000v-1373.htm http://www.pat-services.co.uk/diagonal-cutting-stripping-pliers-1000v-1371.htm Kew Technik Diagonal Cutting and Stripping Pliers (ESCS 0407A)Kew Technik offer a range of 1000V electrical pliers, including Combination Pliers, Long Nose Pliers, Cutting Pliers and Stripping Pliers. They are all manufactured to exacting Euronorm Standards IEC 900, EN 60900 for SAFE 1000V working and are VDE certified.Diagonal Cutting and Stripping Pliers with Power GripHigh comfort hand guards stop hand slipping onto live conductors. Composite handles are designed for non-slip safety and superb control and comfort in the hand.Diagonal Cutting and Stripping Pliers features: Easily strips 1.5mm & 2.5mm using 1 hole! Stripping hole near tip Cutting edge hardness HRC58-62 suitable for hard and soft wire cable Cuts backbox screws effortlesslyDiagonal Cutting and Stripping Pliers Specification:Overall Length: 180mm, 7 inHead Length: 55mm, 2 1/4 inWeight: 250g, 9 oz 1000V Insulated Electrical Tools http://www.pat-services.co.uk/diagonal-cutting-stripping-pliers-1000v-1371.htm http://www.pat-services.co.uk/fluke-1735-power-logger-tester-1369.htm Fluke 1735 Power Logger for Power Quality LoggingPerforms electrical load studies, energy consumption testing, and general power quality logging.The compact Fluke 1735 Power Logger is easy to set up with its colour display and included four flexible current probes. It features a rugged design and enough memory for up to 45 days of recording. In addition to power load studies, the Fluke 1735 Power Logger logs most critical three-phase power parameters, harmonics and it captures voltage events. Saved data can be viewed on the Fluke 1735's screen or you can view graphs and generate reports with the included Fluke Power Log software.Fluke 1735 Power Logger applications include:Load studies verify electrical system capacity before adding loadsEnergy assessments quantify energy consumption before, and after improvements, to justify energy saving devicesHarmonics measurements uncover harmonic issues that can damage or disrupt critical equipmentVoltage event capture monitor for dips and swells that cause spurious resets or nuisance circuit breaker trippingLog the most common power parametersDesigned to measure the most critical three-phase power parameters, the Fluke 1735 Tester can log RMS voltage, RMS current, phase angle, voltage events, voltage and current THD, voltage and current harmonics up to the 50th, active power, reactive power, power factor, active energy, reactive energy, and more. With memory for up to 45 days of data, the Fluke 1735 Power Tester can uncover intermittent or hard-to-find issues.Easy-to-useThe Fluke 1735 Power Logger automatically detects and scales included flexible current probes that require no external power or batteries. These variable range current probes are easily set to 15 A, 150 A, or 3000 A for high accuracy in nearly any application. The voltage connections are single leads, enabling safe and quick setups. The Fluke 1735's colour screen provides instant confirmation that connections are correct and then logging begins when you press the RECORD button.General Fluke 1735 Power Logger features Record power and associated parameters for up to 45 days Monitor maximum power demand over user-defined averaging periods Prove the benefit of efficiency improvements with energy consumption tests Measure harmonic distortion caused by electronic loads Improve reliability by capturing voltage dips and swells from load switching Easily confirm instrument setup with colour display of waveforms and trends Measure all three phases and neutral with included 4 flexible current probes View graphs and generate reports with included Fluke Power Log software Compact, rugged design with Fluke 1735 soft carry case, 600 V CAT III and two year warrantyThe Fluke 1735 Power Logger kit includes: Fluke 1735 Power Logger FS17XX 4-phase flexible current clamp set VL1735/1745 voltage lead set Fluke Power Log software Color localisation set PC interface cable International AC adaptor BC1735 battery charger Soft carrying case Printed English manual Multi-language manual on CD Two year warranty Power Quality Equipment http://www.pat-services.co.uk/fluke-1735-power-logger-tester-1369.htm http://www.pat-services.co.uk/fluke-43b-power-quality-analyser-1367.htm The Fluke 43b Power Quality Analyser/Analyzer is the only analysis tool you need to easily track down all your power and related problems. The Fluke 43B is the engineers choice for diagnosing and troubleshooting power quality and general equipment failures throughout industry. The Fluke 43b all-in-one Power Quality Tester comprises of the following features:Power Quality Analyser (Analyzer) The Fluke 43b measures power (W, VA, VAR) and power factor (PF, DPF) Calculates power and power factor on balanced 3-phase loads Voltage, current and power harmonics up to the 51st Measures sags and swells on a cycle-by-cycle basis for up to 24 hours Automatically captures up to 40 transients as fast as 40 ns Measures motor inrush and analyses using cursors Covers broad frequency range (10 to 400 Hz) Oscilloscope Dual-channel scope Up to 20 MHz bandwidth with the Fluke 43b Voltage Probe Connect and View automatic triggering for an instant stable waveform display On-screen cursors to help analyse signalsMultimeter Measures resistance, continuity and capacitance, and tests diodes Measures temperature with the Fluke 43b Temperature Probe (Fluke 61 IR Thermometer comes supplied)Fluke 43b Recorder records up to 2 parameters for up to 16 days All parameters measured can be recorded including V/A/Hz, all aspects of power and harmonics and all scope measurementsEase-of-use Get immediately inside your power system by simply clicking through the most commonly used power quality modes with just a simple keystroke Just choose the application from the Fluke 43b menu and it sets-up automatically 20 memories for storage of screens and dataGeneral Fluke 43b Power Quality Analyser (Analyzer) features: Calculates three-phase power on balanced loads from a single-phase measurement Measures power harmonics, and captures voltage sags, transients, and inrush currents (see below) Monitoring functions help track intermittent problems and power system performance Fluke 43b menus use familiar electrical terminology Toggle through the most commonly used power quality modes with a single keystroke Records two selectable parameters for up to 16 days 20 measurement memories to save/recall screens and data with cursor readings FlukeView Software can log harmonics and all other readings over time FlukeView Software provides a complete harmonics profile up to the 51st harmonic Measures resistance, diode voltage drop, continuity, and capacitance NIMH Battery provides extended operating time of 6.5 hours Complete Fluke 43b package with voltage probes and 400 A current clamp, FlukeView Software and optically isolated interface cablePower Quality Analyser: Harmonics Fluke 43b measures voltage, current, and power harmonics Up to 51st harmonic Total harmonic distortion (THD) Phase angle of individual harmonicsPower Quality Analyser: Power Fluke 43b measures one and three phase power on balanced loads Watts, power factor, displacement power factor, VA and VAR Voltage and current waveformsPower Quality Analyser: Three phase Fluke 43b has on-screen graphics which show you how to set up 3-phase power measurementsPower Quality Analyser: Sags and swells Fluke 43b continuously measure volts and current on a cycle-by-cycle basis for up to 16 days Use cursors to read time and date of sags and swellsPower Quality Analyser: Transients Fluke 43b can catch voltage transients and waveform distortion Catch and save up to 40 transients Correlate the cause of transient with time and date stampsPower Quality Analyser: Volts/Ampres/Hertz Fluke 43b measures voltage and current waveforms True RMS voltage and current FrequencyFlukeView Software FlukeView Power Quality Tester Software (included in this Fluke 43b kit) Capture measurement screens and data for professional-looking reports Log readings to your computer disk drive Log harmonics data over time to create a complete harmonics profile Works with Windows word processing, spreadsheet and analysis software Windows compatibleFluke 43b Power Quality Analyser (Analyzer) kit includes: Fluke 43b Power Quality Analyser (Analyzer) AC20 Industrial Test Clips BB120 Banana-to-BNC Adapter BP120MH Ni-MH Battery Pack (installed) PM 8907 Battery Charger/Line Voltage Adapter TL24 Test Leads TP4 Slim Reach Test Probe Set (4 mm) Fluke 43b Users Manual / Application Guide (CD-ROM) Getting started booklet + Fluke 61 IR Thermometer + VPS40 Voltage Probe i400s AC Current Clamp (400 A) AB200 Large Jaw Alligator Clips C120 Hard Case OC4USB Interface/Adapter Cable SW43W FlukeView Software for Windows + Power Quality Video TP1 Slim Reach Test Probe Set (flat blade) 3 year warranty on the Fluke 43b, 1 year on accessories Power Quality Equipment http://www.pat-services.co.uk/fluke-43b-power-quality-analyser-1367.htm http://www.pat-services.co.uk/200mm-long-nose-pliers-1000v-1365.htm Kew Technik 200mm Long Nose Pliers (ESL 0408A)Kew Technik offer a range of 1000V electrical pliers, including Combination Pliers, Long Nose Pliers, Cutting Pliers and Stripping Pliers. They are all manufactured to exacting Euronorm Standards IEC 900, EN 60900 for SAFE 1000V working and are VDE certified.200mm Long Nose Pliers with Power GripHigh comfort hand guards stop hand slipping onto live conductors. Composite handles are designed for non-slip safety and superb control and comfort in the hand.200mm Long Nose Pliers Specification:Overall Length: 200mm, 8 inHead Length: 95mm, 3 3/4 inWeight: 210g, 7 1/2 oz 1000V Insulated Electrical Tools http://www.pat-services.co.uk/200mm-long-nose-pliers-1000v-1365.htm http://www.pat-services.co.uk/160mm-long-nose-pliers-1000v-1363.htm Kew Technik 160mm Long Nose Pliers (ESL 0406A)Kew Technik offer a range of 1000V electrical pliers, including Combination Pliers, Long Nose Pliers, Cutting Pliers and Stripping Pliers. They are all manufactured to exacting Euronorm Standards IEC 900, EN 60900 for SAFE 1000V working and are VDE certified.160mm Long Nose Pliers with Power GripHigh comfort hand guards stop hand slipping onto live conductors. Composite handles are designed for non-slip safety and superb control and comfort in the hand.160mm Long Nose Pliers Specification:Overall Length: 160mm, 6 1/4 inHead Length: 70mm, 2 3/4 inWeight: 160g, 5 1/2 oz 1000V Insulated Electrical Tools http://www.pat-services.co.uk/160mm-long-nose-pliers-1000v-1363.htm http://www.pat-services.co.uk/200mm-combination-pliers-1000v-tool-1360.htm Kew Technik 200mm Combination Pliers (ESP 0408A)Kew Technik offer a range of 1000V electrical pliers, including Combination Pliers, Long Nose Pliers, Cutting Pliers and Stripping Pliers. They are all manufactured to exacting Euronorm Standards IEC 900, EN 60900 for SAFE 1000V working and are VDE certified.200mm Combination Pliers with Power GripHigh comfort hand guards stop hand slipping onto live conductors. Composite handles are designed for non-slip safety and superb control and comfort in the hand.200mm Combination Pliers Specification:Overall Length: 200mm, 8 inHead Length: 70mm, 2 3/4 inWeight: 340g, 12 oz 1000V Insulated Electrical Tools http://www.pat-services.co.uk/200mm-combination-pliers-1000v-tool-1360.htm http://www.pat-services.co.uk/160mm-combination-pliers-1000v-tool-1358.htm Kew Technik 160mm Combination Pliers (ESP 0406A)Kew Technik offer a range of 1000V electrical pliers, including Combination Pliers, Long Nose Pliers, Cutting Pliers and Stripping Pliers. They are all manufactured to exacting Euronorm Standards IEC 900, EN 60900 for SAFE 1000V working and are VDE certified.160mm Combination Pliers with Power GripHigh comfort hand guards stop hand slipping onto live conductors. Composite handles are designed for non-slip safety and superb control and comfort in the hand.160mm Combination Pliers Specification:Overall Length: 160mm, 6 1/4 inHead Length: 55mm, 2 1/4 inWeight: 210g, 7 1/2 oz 1000V Insulated Electrical Tools http://www.pat-services.co.uk/160mm-combination-pliers-1000v-tool-1358.htm http://www.pat-services.co.uk/kewtech-kew6310-power-quality-analyser-1356.htm Comes with PQA Master PC Software! The Kyoritsu/Kewtech KEW6310 Power Quality Tester is packed full of functions for power quality analysis and power consumption. This power quality analyser can analyse and store measurements from both single phase and three phase systems. The Kewtech KEW6310 has handy features like operating on batteries or via mains, USB communication to a PC and Compact Flash memory.Kyoritsu/Kewtech KEW6310 Power Quality Analyser (Analyzer) features: Power Consumption (Energy) Control: 12 kinds of Power Measurements for Power Control and Applicable to Power Quality Control including Harmonics Analysis. (Voltage, Current, Active power, Reactive power, Apparent power, Power factor, Frequency, Current flowing on the neutral line (only on 3 phase 4 wire measurement), Active power energy, Reactive power energy, Apparent power energy, Demand measurement (with digital output alarm function available). One click easy-to-use operation. Direct communication with from the Kewtech KEW6310 to a PC via USB cable.  Built-in Input / Output Function of external signal enables the signal transmission to alarms.  2-way power supply by AC and battery, and Nickel Hydrogen battery usable with rechargeable function.  Compact Flash Card, useful for backup.  Can monitor insulation at leakage current by using optional leak clamp sensors. Built-in Print Screen function enables to record display screen. Can display Waveform and Vector, and can confirm the wiring connection, too.  The Kewtech KEW 6310 Power Analyser complies fully with International Safety Standards IEC61010-1 CAT.III 600V.Kyoritsu/Kewtech KEW6310 Power Quality Analyser (Analyzer) comes with: 3x 3000A flexi-clamps Voltage test lead USB cable Mains power cord Soft carrying case Compact Flash Card reader / 128mb Compact Flash Card Input terminal plate (6-kind) Alkaline size AA batteries PQA MASTER PC Software Kewtech KEW 6310 quick manual Cable marker 2 year warrantyPower Quality Analyser: Transients / Over Voltage (Impulse) Kewtech KEW6310 can set Detecting Level Value (Threshold Value). Easy-to-use Checking the Occurrence data on the Kewtech KEW 6310 display.Cause of Transients Over Voltage Arises from defective contact etc. of Breakers, Magnets and Relays. Reaches highest value (peak value) of voltage in a very short time from inputting voltage and this is a unipolar type voltage change (Spike) that attenuates slowly.Bad Effect of Transients Over VoltageDestroys the instruments power source and causes reset action due to sudden voltage change (Spike).Power Quality Analyser: Inrush Current Kewtech KEW6310 can set detecting level value (Threshold Value). Easy-to-Use Confirming the Occurrence data on the Kewtech KEW 6310 display.Cause of Inrush CurrentLarge current (Surge current) flows transiently at the time of starting of instruments etc. which have built-in motor, incandescent lamp, larger capacity smoothing condenser.Bad Effect of Inrush CurrentCauses bad effect to power switch's welding, fusing, breakers trip and converter circuit etc. and also causes unstable power voltage.Power Quality Analyser: Harmonics Analysis Kewtech KEW6310 can measure and analyze from 1st to 63rd Harmonics. Harmonics contents (THD: Total Harmonics Distortion Display). Can judge Inflow / Outflow. Can set Detecting Level Value (Threshold Value).Cause of HarmonicsControl circuits of instruments use inverter circuit (condenser input type converter circuit) and thyristor control circuit (phase control circuit). These circuits cause distortion in the current. The distortion causes harmonics.Bad Effect of HarmonicsCauses burning of phase advance condenser and reactor, beat of transformer, wrong way of breaker, flicker of TV image, noise of audio players etc.Instruments Causing Harmonics Factory / BuildingDirect current motor power device, electric furnace, inverter appliance, uninterrupted power supply, PC, fluorescent lamp, elevator, air-conditioning equipment etc. Residential HouseAir Conditioner, PC, TV, Washing Machine, Refrigerator, Cleaner, Fluorescent Lamp etc.Power Quality Analyser: Swells/Dips/Instantaneous Stop Kewtech KEW6310 can set Detecting Level Value (Threshold value). Easy-to-use confirming the Occurrence data such as Swells/Dips/Instantaneous Stop on the display.Cause of Swells (Voltage Rise)Voltage rises instantaneously by Inrush Current caused at the time of power input of the power line switchgear.Cause of Dips (Voltage Drop)Voltage drop happens by Inrush Current caused at the time of starting of load of motors etc.Cause of Instantaneous StopPower supply stops instantaneously due to thunderbolt etc.(Under 1 sec.) (Interruption of Service > Power supply stop more than 1sec.)Bad Effect of Swells/Dips/Instantaneous StopStops operation of instruments / welding robots and causes reset of OA appliances like PC.Power Quality Analyser: Unbalance Rate Kewtech KEW6310 has one touch switch to vector display and power display. Easy-to-use confirming phase angle difference thanks to Kewtech KEW 6310 vector display.Cause of UnbalanceSpecific Phase gets over loaded due to fluctuation of power line load and unbalanced equipment built. These cause distortion of voltage / current, voltage drop and antiphase voltage.Bad Effect of UnbalanceCauses unbalance of voltage / current.Power Quality Analyser: Phase Advance Condenser Kewtech KEW6310 selects Best Capacity of Phase Advance Condenser by Referring to Loaded Capacity and Power Factor of Transformer.Power Quality Analyser: Wave Range (Waveform Display) Kewtech KEW6310 can check fluctuation of voltage and current simultaneously in each phase. Easy-to-Use Switching to Vector display and Waveform display. Built-in Function Confirming Wiring Connection. Power Quality Equipment http://www.pat-services.co.uk/kewtech-kew6310-power-quality-analyser-1356.htm http://www.pat-services.co.uk/ultimate-professional-test-tool-kit-1354.htm As PKIT 410 PLUS:FREE FFCB 200 UK Easy Fuse Finder Kit Quick Proving UnitSP 200 Voltage TesterMT 401 Digital MultimeterDM 240 Plus Automatic Wire StripperWS 250 1000V Cable ShearsCS 0340 Universal KeyUKEY 01 Re-ThreaderKTRT 0235L Bush SpannerBS 2025 Groove Joint PliersGJP 0310A Light Fitting AdaptorsLTKIT 10 Insulation / Continuity http://www.pat-services.co.uk/ultimate-professional-test-tool-kit-1354.htm http://www.pat-services.co.uk/professional-plus-test-tool-kit-1352.htm As PKIT400 PLUS: Full Check BoxCB 200 Slothead Terminal DriverTSD 0320S Crosshead Terminal DriverTSD 0320P Insulation / Continuity http://www.pat-services.co.uk/professional-plus-test-tool-kit-1352.htm http://www.pat-services.co.uk/metrel-30-meter-extension-lead-1350.htm Metrel 30m Extension LeadThe Metrel 30 Meter Extension Lead with 4mm plug for use with all Insulation Testers and Multifinction Testers. Ideal for testing circuits such as light fittings and ceiling roses where a long wander lead is required. The Metrel 50m Wander Lead comes with it's own crocodile clip.The Metrel Extension Lead Reel has 30 meters of cable terminated with a 4mm plug which and a 4mm socket in the front of the reel. This r2 extension lead is an essential accessory. It is a handy way to test for Earth Bond Continuity as well as for R2 measurements.How does the Metrel Wander Lead work?First, record the resistance of the test lead (or use the auto null facility zero on the Installation Tester). Connect the crocodile clip to the 4mm plug of the Metrel 30 metre Extension Lead and connect it to the earth at the DB. Unwind however much cable you need from the Wander Test Lead and connect the Installation Tester/Continuity Tester to the extension reel 4mm port. One end of the Earth Bonding should be disconnected to avoid parallel earths. Accessories http://www.pat-services.co.uk/metrel-30-meter-extension-lead-1350.htm http://www.pat-services.co.uk/iee-guidance-note-3-bs7671-1348.htm IEE BS7671:2008 17th Edition Guidance Note 3IEE Wiring Regulations Seventeeth Edition BS7671:2008 Requirements for Electrical Installations.A guide to 17th Edition electrical inspection and testing which expands upon Part 6 of the IEE Wiring Regulations. This guide is heavily cross-referenced to the Regulations, thus providing easy access to the information needed.  The IEE Guidance Note 3 is required for City & Guilds 2391:10 and 2392:20 courses.Interested in a 17th Edition training course?PASS now run the following Seventeenth Edition Courses:City & Guilds 17th Edition - 2382-1017th Edition Wiring Regulations, Full Course (3.5 days).City & Guilds 17th Edition - 2382-2017th Edition Wiring Regulations Update (1.5 days).City & Guilds - 2391-10 Level 3Certification In Inspection, Testing & Certification of Electrical Installations.City & Guilds - 2392-10 Level 2Certification in Fundamental Inspection, Testing and Initial Verification.Other 17th Edition BooksIEE Wiring Regulations BS7671:2008, IEE On-Site Guide BS7671:2008 Accessories http://www.pat-services.co.uk/iee-guidance-note-3-bs7671-1348.htm http://www.pat-services.co.uk/iee-onsite-guide-17th-bs7671-1346.htm IEE BS7671:2008 17th Edition On-site GuideIEE Wiring Regulations Seventeeth Edition BS7671:2008 Requirements for Electrical Installations.The IEE On-Site Guide book is a simplified, easy-to-use, version of the 17th Edition IEE Wiring Regulations BS7671:2008 and is intended for a competent electrician to deal with installations up to 100A and 3 phase.It provides essential information in a convenient, easy-to-use form, avoiding the need for detailed calculations. It includes simple circuit calculations.  The IEE OnSite Guide is useful for the City & Guild 2382:10, 2382:20, 2392:10, 2391:10 exam and for using on site.Interested in a 17th Edition training course?PASS now run the following Seventeenth Edition Courses:City & Guilds 17th Edition - 2382-1017th Edition Wiring Regulations, Full Course (3.5 days).City & Guilds 17th Edition - 2382-2017th Edition Wiring Regulations Update (1.5 days).City & Guilds - 2391-10 Level 3Certification In Inspection, Testing & Certification of Electrical Installations.City & Guilds - 2392-10 Level 2Certification in Fundamental Inspection, Testing and Initial Verification.Other 17th Edition BooksIEE Wiring Regulations BS7671:2008, IEE Guidance Note 3 BS7671:2008  Accessories http://www.pat-services.co.uk/iee-onsite-guide-17th-bs7671-1346.htm http://www.pat-services.co.uk/iee-wiring-regulations-17th-bs7671-1344.htm The IEE Wiring Regulations (BS:7671) are the national standard to which all domestic and industrial wiring must conform. The 17th Edition of BS7671:2008 wiring regulations came into publication on the 21st of January 2008, updating 16th Edition which came into place in 1991. Any installation will have to comply with the 17th Edition of BS:7671 if it is designed constructed or tested from the 1st July 2008.BS:7671 applies to the design, erection and verification of electrical installations, also additions and alterations to existing installations. Existing installations that have been installed in accordance with earlier editions of the Regulations may not comply with this edition in every respect. This does not necessarily mean that they are unsafe for continued use or require upgrading. IEE Wiring Regulations BS 7671:2008 (17th Edition) includes changes necessary to maintain technical alignment with CENELEC harmonization documents. IEE Wiring Regulations BS 7671:2008 (17th Edition) Requirements for Electrical Installations came into effect on 1st July 2008. Installations designed after 30th June 2008 are to comply with BS 7671:2008 (17th Edition).Interested in a 17th Edition training course?PASS now run the following Seventeenth Edition Courses:City & Guilds 17th Edition - 2382-1017th Edition Wiring Regulations, Full Course (3.5 days).City & Guilds 17th Edition - 2382-2017th Edition Wiring Regulations Update (1.5 days).City & Guilds - 2391-10 Level 3Certification In Inspection, Testing & Certification of Electrical Installations.City & Guilds - 2392-10 Level 2Certification in Fundamental Inspection, Testing and Initial Verification.Other 17th Edition BooksIEE On-Site Guide BS7671:2008, IEE Guidance Note 3 BS7671:2008  Accessories http://www.pat-services.co.uk/iee-wiring-regulations-17th-bs7671-1344.htm http://www.pat-services.co.uk/kewtech-kewlok-locking-off-device-1342.htm The Kewtech Kewlok Locking Off Device is easy-to-use and has a universal design to fit most makes of MCB.  No more padlock keys will be required as the Kewlok Locking Off Device comes with a combination code lock.Features of the Kewtech Kewlok Locking Off Device: Just set your combination, no more keys to lose "Locking Off" makes installation safe and is good practice Shackle can hang warning notice (two supplied) Saves money on heavy lock out kits Saves time - one size fits all Fuse Finders / Cable Locators http://www.pat-services.co.uk/kewtech-kewlok-locking-off-device-1342.htm http://www.pat-services.co.uk/professional-electrical-test-tool-kit-1340.htm PKIT 400 Professional Test & Tool KitTest kit with TECC 70 Heavy Duty Case containing: 17th Edition Insulation Tester/Continuity TesterDIT 400 17th Edition Multifunction RDC TesterDRC 430 17th Edition Loop TesterDL 420 Test Lead KitITLS 400 Non Fused Test Lead KitIT 001 Test Equipment Accuracy RecordEAR 005 3 Sets of BatteriesSBX 4AA 2 x 13A Plug to IEC Female ConnectorIECP UKA Socket Interface ConnnectorSS 130 Professional Socket TesterSOK 32 160mm Diagonal Cutting PliersESC 0406A 160mm Long Nose Cutting PliersESL 0406A 160mm Combination PliersESP 0406AScrewdrivers: 4 Slothead / 4 CrossheadPower Grip ScrewdriversSS 612265 (-) 6.5mm 1/4inSS 612255 (-) 5.5mm 7/32inSP 6122PZ2 (+) No 2SS 612240 (-) 4.0mm 5/32inSP 6122PZ1 (+) No 1SS 612235 (-) 3.5mm 5/32inSP 6122PH2 (+) No 2SP 6122PH1 (+) No 1 Insulation / Continuity http://www.pat-services.co.uk/professional-electrical-test-tool-kit-1340.htm http://www.pat-services.co.uk/pat-testing-labels-kit-4-1336.htm Label Kit 4 has a selection of the most popular PAT Testing labels.  A great saving over buying them all individually!PAT Testing Labels included:1500 x WM1 PASSED Labels250 x WM7 FAILED Labels1000 x WM12 CABLE WRAP Labels1000 x WM15 APPLIANCE BARCODE Labels500 x WM45 MARK AND SEAL Lables100 x WMMIC MICROWAVE Lables250 x TOUGH TAG PASSED Lables 250 x TOUGH TAG FAILED Lables Also included:1 x LABEL MARKER PEN PAT Testing Labels, Stickers and Tags http://www.pat-services.co.uk/pat-testing-labels-kit-4-1336.htm http://www.pat-services.co.uk/pat-testing-labels-kit-3-1334.htm Label Kit 3 has a huge selection of fantastic value labels, ideal if you have a barcode scanner.  A great saving over buying them all individually!PAT Testing Labels included:2000 x WM1 PASSED Labels250 x WM7 FAILED Labels2000 x WM12 CABLE WRAP Labels2000 x WM15 APPLIANCE BARCODE LabelsAlso included:1 x LABEL MARKER PEN PAT Testing Labels, Stickers and Tags http://www.pat-services.co.uk/pat-testing-labels-kit-3-1334.htm http://www.pat-services.co.uk/pat-testing-labels-kit-2-1332.htm Label Kit 2 has a selection of fantastic bargain labels, ideal if you have a barcode scanner.  A great saving over buying them all individually!PAT Testing Labels included:1000 x WM1 PASSED Labels250 x WM7 FAILED Labels1000 x WM12 CABLE WRAP Labels1000 x WM15 APPLIANCE BARCODE LabelsAlso included:1 x LABEL MARKER PEN PAT Testing Labels, Stickers and Tags http://www.pat-services.co.uk/pat-testing-labels-kit-2-1332.htm http://www.pat-services.co.uk/pat-testing-labels-kit-1-1330.htm Label Kit 1 has a selection of fantastic value labels.  A great saving over buying them all individually!PAT Testing Labels included:500 x WM1 PASSED Labels250 x WM7 FAILED Labels500 x WM12 CABLE WRAP Labels500 x WM13 PASSED PAT Plug Top Labels500 x WM45 MARK AND SEAL LabelsAlso included:1 x LABEL MARKER PEN PAT Testing Labels, Stickers and Tags http://www.pat-services.co.uk/pat-testing-labels-kit-1-1330.htm http://www.pat-services.co.uk/metrel-swiftpat-mi3302-pat-kit3-1328.htm The Ultimate PAT Testing starter kit with data entry software for producing great results!  Includes a Microwave Leakage Detector to comply with new IEE regulations.Metrel SwiftPAT MI 3302 PAT Tester Kit 3 with Microwave Leakage Detector includes:  Metrel SwiftPAT MI 3302 PAT Tester Microwave Leakage Detector SimplyPATS Manual Software The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 500 Failed Labels 500 Cable Wraps 240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results) Also comes supplied with: Earth Bond Test Lead Mains Lead 240v Plug to 110v Adaptor for testing 110v appliances Instruction Manual Soft Carry Case 3 Year WarrantyThe Metrel SwiftPAT MI 3302 Kit is new to the market. It is a manual PAT Tester that is great for those who have little experience in PAT Testing. Simple to operate, the Metrel MI 3302 will give a clear PASS or Fail reading and clearly displays all results on it's bright LCD screen.  The SwiftPAT kit is great value.This tester comes already calibrated and includes a 110V adaptor for testing 110v electrical appliances.Calibration is included FREE. Metrel SwiftPAT MI 3302 PAT Tester Kits http://www.pat-services.co.uk/metrel-swiftpat-mi3302-pat-kit3-1328.htm http://www.pat-services.co.uk/metrel-swiftpat-mi3302-pat-kit2-1326.htm An excellent PAT Testing starter kit with data entry software for producing great results!Metrel SwiftPAT MI 3302 PAT Tester Kit 2 with Software includes:  Metrel SwiftPAT MI 3302 PAT Tester  SimplyPATS Manual Software The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 500 Failed Labels 500 Cable Wraps 240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results) Also comes supplied with: Earth Bond Test Lead Mains Lead 240v Plug to 110v Adaptor for testing 110v appliances Instruction Manual Soft Carry Case 3 Year WarrantyThe Metrel SwiftPAT MI 3302 Kit is new to the market. It is a manual PAT Tester that is great for those who have little experience in PAT Testing. Simple to operate, the Metrel MI 3302 will give a clear PASS or Fail reading and clearly displays all results on it's bright LCD screen.  The SwiftPAT kit is great value.This tester comes already calibrated and includes a 110V adaptor for testing 110v electrical appliances. Calibration is included FREE. Metrel SwiftPAT MI 3302 PAT Tester Kits http://www.pat-services.co.uk/metrel-swiftpat-mi3302-pat-kit2-1326.htm http://www.pat-services.co.uk/metrel-swiftpat-mi3302-pat-kit1-1324.htm An excellent PAT Testing Starter Kit!  Metrel SwiftPAT MI 3302 PAT Tester Kit 1 includes:  Metrel SwiftPAT MI 3302 PAT Tester The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 500 Failed Labels 500 Cable Wraps 240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results) Also comes supplied with: Earth Bond Test Lead Mains Lead 240v Plug to 110v Adaptor for testing 110v appliances Instruction Manual Soft Carry Case 3 Year WarrantyThe Metrel SwiftPAT MI 3302 Kit is new to the market. It is a manual PAT Tester that is great for those who have little experience in PAT Testing. Simple to operate, the Metrel MI 3302 will give a clear PASS or Fail reading and clearly displays all results on it's bright LCD screen.  The SwiftPAT kit is great value.This tester comes already calibrated and includes a 110V adaptor for testing 110v electrical appliances.Calibration is included FREE. Metrel SwiftPAT MI 3302 PAT Tester Kits http://www.pat-services.co.uk/metrel-swiftpat-mi3302-pat-kit1-1324.htm http://www.pat-services.co.uk/kewtech-kt74-pat-tester-kit4-1322.htm An excellent kit to download, maintain and manage your PAT Testing results with a scanner for faster and easier PAT Testing!Kewtech KT74 Kit 4 - Data Management PAT Tester Kit with Scanner includes:  Kewtech KT74 PAT Tester SimplyPATs Software Barcode Scanner 1000 Barcode Labels 1000 Passed Labels 500 Failed Labels 500 Cable Wraps Kewcheck 105 Socket Tester 230v Plug (13amp) to IEC Socket IEC Socket to 110v Plug (16amp) Also comes supplied with:  Mains Lead Earth Bond Test Lead Instruction Manual 128mb USB Memory StickA modern downloadable PAT Tester that is pre-programmed with ten automatic tests to speed up testing. It stores up to 1800 test results which can then be transferred via its inbuilt USB port - The Kewtech KT74 PAT Tester is one of a few PAT Testers on the current market with this facility.The Kewtech KT74 PAT Tester is a dual voltage tester which can carry out Earth Bond Continuity Tests at 100mA, 10A and 26A, Insulation Test 250/500V DC, Earth Leakage Test, Load/Run Test, Fuse Test and Fuse Check. It also tests Extension Leads and IEC Leads.It comes fitted with a handle and in its own hard case which will protect against hard knocks.Calibration is NOT included. Kewtech KT74 Kits http://www.pat-services.co.uk/kewtech-kt74-pat-tester-kit4-1322.htm http://www.pat-services.co.uk/kewtech-kt74-pat-tester-kit3-1320.htm An excellent kit to download, maintain and manage your PAT Testing results!Kewtech KT74 Kit 3 - Data Management PAT Tester Kit includes:  Kewtech KT74 PAT Tester SimplyPATs Software 1000 Passed Labels 500 Failed Labels 500 Cable Wraps Kewcheck 105 Socket Tester 230v Plug (13amp) to IEC Socket IEC Socket to 110v Plug (16amp) Also comes supplied with:  Mains Lead Earth Bond Test Lead Instruction Manual 128mb USB Memory StickA modern downloadable PAT Tester that is pre-programmed with ten automatic tests to speed up testing. It stores up to 1800 test results which can then be transferred via its inbuilt USB port - The Kewtech KT74 PAT Tester is one of a few PAT Testers on the current market with this facility.The Kewtech KT74 PAT Tester is a dual voltage tester which can carry out Earth Bond Continuity Tests at 100mA, 10A and 26A, Insulation Test 250/500V DC, Earth Leakage Test, Load/Run Test, Fuse Test and Fuse Check. It also tests Extension Leads and IEC Leads.It comes fitted with a handle and in its own hard case which will protect against hard knocks. Calibration is NOT included. Kewtech KT74 Kits http://www.pat-services.co.uk/kewtech-kt74-pat-tester-kit3-1320.htm http://www.pat-services.co.uk/kewtech-kt74-pat-tester-kit2-1318.htm An excellent professional PAT Testing starter kit with a scanner for faster and easier PAT Testing!Kewtech KT74 Kit 2 - Pro PAT Tester Starter Kit with Scanner includes:  Kewtech KT74 PAT Tester Barcode Scanner 1000 Barcode Lables 1000 Passed Labels 500 Failed Labels 500 Cable Wraps Kewcheck 105 Socket Tester 230v Plug (13amp) to IEC Socket IEC Socket to 110v Plug (16amp) Kewtech PAT Testing Log book (to record your test results)Also comes supplied with:  Mains Lead Earth Bond Test Lead Instruction Manual 128mb USB Memory StickA modern downloadable PAT Tester that is pre-programmed with ten automatic tests to speed up testing. It stores up to 1800 test results which can then be transferred via its inbuilt USB port - The Kewtech KT74 PAT Tester is one of a few PAT Testers on the current market with this facility.The Kewtech KT74 PAT Tester is a dual voltage tester which can carry out Earth Bond Continuity Tests at 100mA, 10A and 26A, Insulation Test 250/500V DC, Earth Leakage Test, Load/Run Test, Fuse Test and Fuse Check. It also tests Extension Leads and IEC Leads.It comes fitted with a handle and in its own hard case which will protect against hard knocks. Calibration is NOT included. Kewtech KT74 Kits http://www.pat-services.co.uk/kewtech-kt74-pat-tester-kit2-1318.htm http://www.pat-services.co.uk/kewtech-kt74-pat-tester-kit1-1316.htm An excellent professional PAT Testing starter kit!Kewtech KT74 Kit 1 - Pro PAT Tester Starter Kit includes:  Kewtech KT74 PAT Tester 1000 Passed Labels 500 Failed Labels 500 Cable Wraps Kewcheck 105 Socket Tester 230v Plug (13amp) to IEC Socket IEC Socket to 110v Plug (16amp) Kewtech PAT Testing Log book (to record your test results)Also comes supplied with:  Mains Lead Earth Bond Test Lead Instruction Manual 128mb USB Memory StickA modern downloadable PAT Tester that is pre-programmed with ten automatic tests to speed up testing. It stores up to 1800 test results which can then be transferred via its inbuilt USB port - The Kewtech KT74 PAT Tester is one of a few PAT Testers on the current market with this facility.The Kewtech KT74 PAT Tester is a dual voltage tester which can carry out Earth Bond Continuity Tests at 100mA, 10A and 26A, Insulation Test 250/500V DC, Earth Leakage Test, Load/Run Test, Fuse Test and Fuse Check. It also tests Extension Leads and IEC Leads.It comes fitted with a handle and in its own hard case which will protect against hard knocks.Calibration is NOT included. Kewtech KT74 Kits http://www.pat-services.co.uk/kewtech-kt74-pat-tester-kit1-1316.htm http://www.pat-services.co.uk/dilog-dlc107-portable-appliance-register-1314.htm DiLog DLC107 Portable Appliance Register (PAT Testing Register).DiLog's Portable Appliance Register (PAT Testing Register) provides a clear and simple format for completing certification to BS 7671. Each pad has a duplicate copies for contractor and client. PAT Tester Accessories http://www.pat-services.co.uk/dilog-dlc107-portable-appliance-register-1314.htm http://www.pat-services.co.uk/dilog-dlc106-domestic-installation-certificate-1312.htm DiLog DLC106 Part P Domestic Installation Certificate.DiLog's Part P form for Domestic Installers provides a clear and simple format for completing certification to BS 7671. Each pad has a duplicate Part P certificate for contractor and client. Certificates and Documentation http://www.pat-services.co.uk/dilog-dlc106-domestic-installation-certificate-1312.htm http://www.pat-services.co.uk/dilog-dlc105-schedule-inspection-results-1310.htm DiLog DLC105 Schedule of Inspection and Test Results for distribution boards and consumer units up to 36 ways.17th Edition Forms.DiLog's Schedule of Inspection and Test Results Form provides a clear and simple format for completing certification to BS 7671. Each pad has duplicate copies for contractor and client. Certificates and Documentation http://www.pat-services.co.uk/dilog-dlc105-schedule-inspection-results-1310.htm http://www.pat-services.co.uk/dilog-dlc104-schedule-inspection-results-1308.htm DiLog DLC104 Schedule of Inspection and Test Results for distribution boards and consumer units up to 12 ways.17th Edition Forms.DiLog's Schedule of Inspection and Test Results Form provides a clear and simple format for completing certification to BS 7671. Each pad has duplicate copies for contractor and client. Certificates and Documentation http://www.pat-services.co.uk/dilog-dlc104-schedule-inspection-results-1308.htm http://www.pat-services.co.uk/dilog-dlc103-periodic-inspection-report-1306.htm DiLog DLC103 Periodic Inspection Report (to be accompanied with DLC104 or DLC105).17th Edition Forms.DiLog's Periodic Inspection Form provides a clear and simple format for completing certification to BS 7671. Each pad has duplicate copies for contractor and client. Certificates and Documentation http://www.pat-services.co.uk/dilog-dlc103-periodic-inspection-report-1306.htm http://www.pat-services.co.uk/dilog-dlc102-minor-works-certificate-1304.htm DiLog DLC102 Electrical Installation Minor Works Certificate.17th Edition Forms.DiLog's Electrical Installation Minor Works Form provides a clear and simple format for completing certification to BS 7671. Each pad has duplicate copies for contractor and client. Certificates and Documentation http://www.pat-services.co.uk/dilog-dlc102-minor-works-certificate-1304.htm http://www.pat-services.co.uk/dilog-dlc101-electrical-installation-certificate-1302.htm DiLog DLC101 Electrical Installation Certificate (to be accompanied with DLC104 or DLC105).17th Edition Forms.DiLog's Electrical Installation Form provides a clear and simple format for completing certification to BS 7671. Each pad has duplicate copies for contractor and client. Certificates and Documentation http://www.pat-services.co.uk/dilog-dlc101-electrical-installation-certificate-1302.htm http://www.pat-services.co.uk/dilog-pl500-fuse-cable-locator-1300.htm Simple budget Dilog Cable Locator and Fuse Locator set comprising both transmitter and receiver in one.DiLog Fuse Finder & Cable Locator Set PL500 features: Locate fuses/MCBs and assignment to particular circuits Find breaks in cable quickly and effectively Trace cables in walls up to 40 cm Accurately sort cables Easy to use simply plug in the transmitter and trace cable with the receiver Includes sensitivity adjustment thereby maximising the accuracy of both tracing and locatingDiLog Fuse Finder & Cable Locator Set PL500 specification:Voltage Range: 100 to 250 VFrequency Range: 50 to 60 HzTracing Depth Cable: up to 40cmTracing Depth Fuses/MCBs: up to 10 cmTransmission Frequency: approx 8 kHzOver Voltage Category: CAT III/300 VPower Supply: 9 V 6LR61 batteryDimensions: Transmitter 86 x 70 x 55 mm, Receiver 162 x 34 x 22 mmWeight: Transmitter 65g, Receiver 100g Fuse Finders / Cable Locators http://www.pat-services.co.uk/dilog-pl500-fuse-cable-locator-1300.htm http://www.pat-services.co.uk/pl280n-digital-multimeter-1298.htm This budget DiLog Digital Multimeter comes in a robust double moulded housing and has a fantastic range of results!DiLog PL280N Digital Multimeter features: 3 digit, 2000 count, LCD display AC/DC voltage measurement up to 600 V Manufactured to IEC1010-1 CAT III 600 V Hold button for keeping results on screen Backlight for those dark places Comes with 9V battery, test leads and instructionsDiLog PL280N Digital Multimeter specifications:Display: 3 digit display, max reading 1999 digitsAC Voltage: Range: 0 to 600 V, Accuracy: +/- 1.2 % rdg + 10 digitsDC Voltage: Range: 0 to 600 V, Accuracy: +/- 0.8 % rdg + 2 digitsAC Current: Range: 0 to 600 A, Accuracy: +/- 1.2 % rdg + 10 digitsDC Current: Range: 2000 μA to 10A, Accuracy: +/- 2.0 % rdg + 2 digitsResistance: Range: 0 to 2 MΩ, Accuracy: +/- 1.0 % rdg + 2 digitsBattery Test: Range: 1.5V/9V, Accuracy: +/- 1.0 % rdg + 2 digitsOvervoltage Capacity: Cat II 600VPower Supply: 9V 6LR61 batteryDimensions: 138 x 68 x 37 mmWeight: 210g Digital Multimeters http://www.pat-services.co.uk/pl280n-digital-multimeter-1298.htm http://www.pat-services.co.uk/dilog-pl107n-voltage-indicator-stick-1296.htm This budget DiLog Voltage indicator is an easy-to-use volt stick packed with loads of features!DiLog PL107N Non Contact Voltage Indicator features: Contactfree audible and visual indication of AC voltages between 90 and 1000 V AC Clear, omnidirectional flashing LED Quick and accurate detection of cable breaks Microwave Leakage Detector - Detects microwave leakage Phase Detector - Phase detection in sockets Press to test switch avoids nuisance buzzing and extends battery life Supplied complete with 1.5 V AAA batteriesDiLog PL107N Non Contact Voltage Indicator specification:Indication: 1 LED, buzzerVoltage Range: 90 1000 V ACOperating Temperature: -10 to 50COvervoltage Category: Cat 111/600 VPower Supply: 2 x 1.5 V AAA batteriesDimensions: 150 x 22 x 21 mmWeight: 60g Voltage Detectors / Volt Sticks http://www.pat-services.co.uk/dilog-pl107n-voltage-indicator-stick-1296.htm http://www.pat-services.co.uk/dilog-pl001-analogue-multimeter-1294.htm A great budget multimeter from DiLog!DiLog PL001 Analogue Multimeter features: Analogue multimeter in handy compact housing AC/DC voltage measurement up to 500 V DC current measurement up to 250 mA Integrated test leads Supplied complete with protective holster and batteryDiLog PL001 Analogue Multimeter specification:Display: Analogue mirror scaleAC Voltage: Range: 0 - 500V, Accuracy: 5% full scaleDC Voltage: Range: 0 - 500V, Accuracy: 5% full scaleDC Current: Range: 0 - 250mA, Accuracy: 5% full scaleResistance: Range: 0 - 500KΩ, Accuracy: 5% full scaleBattery Test: 1.5V (100mA)/9V (10mA)Overvoltage Category: Cat II 300VPower Supply: 1.5 V AA batteryDimensions: 130 x 65 x 40 mmWeight: 200g Digital Multimeters http://www.pat-services.co.uk/dilog-pl001-analogue-multimeter-1294.htm http://www.pat-services.co.uk/dilog-dl9020-phase-rotation-tester-1292.htm The DiLog DL9020 Non Contact Phase Rotation Meter & Motor Rotation Tester is a hand held motor and phase rotation indicator. The battery powered instrument is designed to detect the phase rotation of three phase systems and to determine motor rotation direction.The DiLog DL9020 Non Contact Phase & Motor Rotation Tester features: Determine motor and phase connection Non contact phase rotation indication Determine phase rotation direction of 3 phase systems Wireless Supplied with croc clipsThe DiLog DL9020 Non Contact Phase & Motor Rotation Tester specification:Voltage Range: 40 690 VNominal Test Current: 1 mAFrequency Range: 15 400 HzOver Voltage Category: CAT III 600 VPower Supply: From mains supplyDimensions: 130 x 69 x 32 mmWeight: 130g Fuse Finders / Cable Locators http://www.pat-services.co.uk/dilog-dl9020-phase-rotation-tester-1292.htm http://www.pat-services.co.uk/dilog-dl9010-phase-rotation-tester-1290.htm This phase rotation meter is great for checking motor rotation in repaired or replacement motors for the correct opertion of the motor's connected load.DiLog DL9010 Phase Rotation Tester features: Indicates presence of individual phase via LCD display Swift determination of phase rotation via LCD Voltage and frequency range suitable for all industrial applications No battery requiredDiLog DL9010 Phase Rotation Tester specification:Voltage Range: 40 690 VNominal Test Current: 1 mAFrequency Range: 15 400 HzOver Voltage Category: CAT III 600 VProtection Level: IP40Power Supply: From mains supplyDimensions: 130 x 69 x 32 mmWeight: 130g Fuse Finders / Cable Locators http://www.pat-services.co.uk/dilog-dl9010-phase-rotation-tester-1290.htm http://www.pat-services.co.uk/dilog-dl7108-moisture-meter-1288.htm The DiLog DL7108 Moisture Reader is used to measure the percentage of water in a given substance. This information can be used to determine if the material is ready for use, unexpectedly wet or dry, or otherwise in need of further inspection.Ideal for testing moisture levels in sawn timber, cardboard, paper, plaster, concrete and mortar. The large LCD display and analogue bar graph provide clear visual readings.DiLog DL7108 Moisture Meter specification:Electrode Length: 8mmElectrodes: Integrated, replaceableRange: Wood 6 - 44% Material 0.2 - 2.0%Display Accuracy: Wood 1%, material +- 0.05%Power Supply: 3 x CR2032 batteriesDimensions: 140 x 48 x 33 mmWeight: 93g Environmental Test Equipment http://www.pat-services.co.uk/dilog-dl7108-moisture-meter-1288.htm http://www.pat-services.co.uk/dilog-dl7107-environment-meter-multimeter-1286.htm The DiLog DL7107 6 in 1 Environment Meter with Multimeter function provides a cost effective solution to environmental compliance testing requirements combined with multimeter functions.It's a Digital Sound Level Meter, Light Meter, Temperature Meter, Humidity Meter and Multimeter all in one!The DiLog DL7107 6 in 1 Environment Meter with Multimeter function features: Decibel readings up to 130dB Light levels up to 40,000 lux Temperature up to 750C Relative humidity up to 95%The DiLog DL7107 6 in 1 Environment Meter with Multimeter function specifications:Measurement- Sound: Range: 100, 130 dB, Resolution: 0.1 dB, Basic Accuracy: +- 3.5 dB- Light: Range: 40,000 Lux, Resolution: 0.1 Lux, Basic Accuracy: +- 0.5% +10 digits- Humidity: Range: 95% RH, Resolution: 0.1% RH, Basic Accuracy: +- 5.0%- Temperature: Range: 750C/1400F, Resolution: 0.1C/0.1 F, Basic Accuracy: +- 3 % + 2dgts- Non Contact Voltage: 50 1000 V- Voltage DC: Range: 600 V, Resolution: 0.1 mV, Basic Accuracy: +- 0.5% +- 2dgts- Voltage AC: Range: 600 V, Resolution: 0.1 mV, Basic Accuracy: +- 1.2% +- 10 dgts- Current AC/DC: Range: 10 A, Resolution: 0.1 μA, Basic Accuracy: +- 1.0% +- 2dgts- Resistance: Range: 40 MΩ, Resolution: 0.1 Ω, Basic Accuracy: +- 0.8% +- 2dgts- Capacitance: Range: 100 μF, Resolution: 0.01 μF, Basic Accuracy: +- 3.5%- Frequency: Range: 10 MHz, Resolution: 0.001 Hz, Basic Accuracy: +- 1.5%Power Supply: 1 x 9V batteryDimensions: 121 x 61 x 40 mmWeight: 280g Digital Multimeters http://www.pat-services.co.uk/dilog-dl7107-environment-meter-multimeter-1286.htm http://www.pat-services.co.uk/dilog-dl7106-4in1-environment-meter-1284.htm The DiLog DL7106 4 in 1 Environment Meter provides a cost effective solution to environmental compliance testing requirements. The humidity/temperature function uses a semiconductor sensor and K type thermocouple.It's a Digital Sound Level Meter, Light Meter, Temperature Meter and Humidity Meter all in one!DiLog 4 in 1 Environment Meter DL7106 features: Sound levels up to 130 dB Light levels up to 20,000 lux Temperature up to 750 C Relative humidity up to 95%DiLog 4 in 1 Environment Meter DL7106 specifications:Measurement- Sound: Range: 35dB - 100 dB, Accuracy: +- 3.5 dB at 94 dB- Light: Range: 20, 200, 2000, 20000 Lux, Accuracy: +- 5.0 % +10 digits- Humidity: Range: 35 95 % RH, Accuracy: +- 5.0 % at 25CTemperature- Celsius: Range: -20 750C, Accuracy: +- 3.0 % +2C- Fahrenheit: Range: -4 1400F, Accuracy: +- 3.0 % +2FPower Supply: 1 x 9V batteryDimensions: 250 x 90 x 30 mmWeight: 392g Environmental Test Equipment http://www.pat-services.co.uk/dilog-dl7106-4in1-environment-meter-1284.htm http://www.pat-services.co.uk/dilog-digital-sound-level-meter-1282.htm The DiLog Digital Sound Level Meter DL7103 allows for easy measurement of sound level for health and safety compliance, with regard to nuisance noise levels and compliance with warning indication for fire alarms.DiLog Digital Sound Level Meter DL7103 features: Fast and slow response function A & C weighting function Max reading and data hold Large LCD displayDiLog Digital Sound Level Meter DL7103 specifications:Measurement- Lo: 30-100 dB, Resolution: 0.1 dB, Basic Accuracy: + 1.5 dB- Hi: 60-130 dB, Resolution: 0.1 dB, Basic Accuracy: + 1.5 dBBattery Life: Approx 50 hoursPower Supply: 1 x 9V batteryDimensions: 210 x 55 x 32 mmWeight: 230g Environmental Test Equipment http://www.pat-services.co.uk/dilog-digital-sound-level-meter-1282.htm http://www.pat-services.co.uk/dilog-dl7040-digital-light-meter-1280.htm The DiLog Digital Light Meter (DL7040) is a low cost light level meter which is extremely easy to use. DiLog Digital Light Meter DL7040 features: 4000 count digital LCD display with bar graph Wide measuring range up to 400,000 Lux Long life silicon photo diode sensor Measurement rate 1.5 times per secondDiLog Digital Light Meter DL7040 specifications:Display: 31/2 DigitAccuracy: +/- 5 % + 10 digits, +/- 10 % + digitsLux Range/Resolution: 0 50,000 Lux, 0 400,000 Lux Max Resolution: 0.1 LuxMeasuring Rate: 1.5 times per secondPower Supply: 1 x 9 V batteryDimensions: 165 x 76 x 43 mmWeight: 403g Environmental Test Equipment http://www.pat-services.co.uk/dilog-dl7040-digital-light-meter-1280.htm http://www.pat-services.co.uk/dilog-dl7030-digital-light-meter-1278.htm The DiLog Digital Light Meter (DL7030) is a low cost light level meter which is extremely easy to use. DiLog Digital Light Meter DL7030 features: Digital LCD display Three measurement ranges Silicon photo diode sensor Manual range selectionDiLog Digital Light Meter DL7030 specifications:Display: 31/2 DigitLux Range/Resolution: 0-2000/1.0 lux, 0 20,000/10 lux, 0 50,000/100 luxAccuracy: +/- 5 % rdg + 3 digitsPower Supply: 1 x 9 V. IEC 6LR61Dimensions: 120 x 65 x 25 mmWeight: 237g Environmental Test Equipment http://www.pat-services.co.uk/dilog-dl7030-digital-light-meter-1278.htm http://www.pat-services.co.uk/dl6790-combivolt2-voltage-continuity-tester-1276.htm DiLog CombiVolt 2 Voltage Tester and Continuity Tester with Phase Rotation Test.The CombiVolt 2 three-in-one tester has a rugged, ergonomically formed housing for perfect handling.  Similar to the DiLog CombiVolt 1 Voltage / Continuity Tester DL6780 but with digital LCD display.DiLog DL6790 CombiVolt 2 Voltage and Continuity Tester features: Digital LCD display Testing of AC/DC voltages from 12 to 690V AC/DC Continuity testing with optical and acoustic indication Automatic switching between voltage and continuity Three Phase Rotation detection system Intergrated single pole test for phase detection Short response time (<0,1s) for fast voltage tests Single pole phase indication Fully compliant with GS38 Fully operational voltage indication even when batteries are discharged IP65 - water-jet and dust-tight protection for outdoor use Electrical torch function - for working in dark environments Probe-tip protection - for reducing the danger of injuries which may be cause by probe tip Designed and built according to IEC61010, IEC61243-3 Proving unit friendlyDiLog DL6790 CombiVolt 2 Voltage and Continuity Tester specification:VoltageVoltage Display: 12 690 V AC/DCLED Resolution: 12, 24, 50, 120, 230, 400, 690LCD Resolution: 1 V +/- 3% + 8 digitsVoltage Detection: AutomaticAcoustic Signal: AC voltage DC voltagePolarity Detection: Full rangeResponse Time: LED < 0.1s, LCD <2sFrequency Range: 0 400 HzPeak Current: Is<0.3A/Is(after 5s) <3.5 mAOperation Time: 30sRecovery Time: 10 minAuto Power On: <12 V AC/DCSingle Pole Voltage IndicationVoltage Range: 100 690 VFrequency Range: 50 400 HzContinuityMeasuring Range: 0 - 400 KΩPhase Rotation TestVoltage Range: 100 690 VFrequency: 45 65 HzOver Voltage Protection: 690 V AC/DCOtherPower Supply: 2 x 1.5V LR03 batteryDimensions: 255 x 70 x 28 mmWeight: 200g Voltage Detectors / Volt Sticks http://www.pat-services.co.uk/dl6790-combivolt2-voltage-continuity-tester-1276.htm http://www.pat-services.co.uk/dl6780-combivolt1-voltage-continuity-tester-1274.htm DiLog CombiVolt 1 Voltage Tester and Continuity Tester with Phase Rotation Test.The CombiVolt 1 three-in-one tester has a rugged, ergonomically formed housing for perfect handling.  If you require a voltage and continuity tester with digital LCD display, then see the DiLog CombiVolt 2 Voltage / Continuity Tester DL6790.DiLog DL6780 CombiVolt 1 Voltage and Continuity Tester features: Testing of AC/DC voltages from 12 to 690V AC/DC Continuity testing with optical and acoustic indication Automatic switching between voltage and continuity Three Phase Rotation detection system Intergrated single pole test for phase detection Short response time (<0,1s) for fast voltage tests Single pole phase indication Fully compliant with GS38 Fully operational voltage indication even when batteries are discharged IP65 - water-jet and dust-tight protection for outdoor use Electrical torch function - for working in dark environments Probe-tip protection - for reducing the danger of injuries which may be cause by probe tip Designed and built according to IEC61010, IEC61243-3 Proving unit friendlyDiLog DL6780 CombiVolt 1 Voltage and Continuity Tester specification:VoltageVoltage Display: 12 690 V AC/DCLED Resolution: 12, 24, 50, 120, 230, 400, 690Voltage Detection: AutomaticAcoustic Signal: AC voltage DC voltagePolarity Detection: Full rangeResponse Time: LED < 0.1sFrequency Range: 0 400 HzPeak Current: Is<0.3A/Is(after 5s) <3.5 mAOperation Time: 30sRecovery Time: 10 minAuto Power On: <12 V AC/DCSingle Pole Voltage IndicationVoltage Range: 100 690 VFrequency Range: 50 400 HzContinuityMeasuring Range: 0 - 400 KΩPhase Rotation TestVoltage Range: 100 690 VFrequency: 45 65 HzOver Voltage Protection: 690 V AC/DCOtherPower Supply: 2 x 1.5V LR03 batteryDimensions: 255 x 70 x 28 mmWeight: 200g Voltage Detectors / Volt Sticks http://www.pat-services.co.uk/dl6780-combivolt1-voltage-continuity-tester-1274.htm http://www.pat-services.co.uk/dilog-dl2080-cable-locator-set-1272.htm Complete set comprising Transmitter and Receiver. Ideal for tracing cables in walls/underground and locating interruptions/short-circuits in cables and electrical floor heating systems.DiLog DL2080 Cable Locator Set features: Tracing of underground cables down to 2.5 m Transmitter with digitally coded signal for clear signal identification Receiver with LCD display signal code and strength identification and voltage indication Automatic or manual adjustment of receiving signal sensitivity Operates on both live and dead cablesDiLog DL2080 Cable Locator Set specification:Measurement: RangeVoltage: 12, 50, 120, 230 & 400 VFrequency Range: 0 60HzOutput Signal: 125 HzTracing Depth: 0 2.5 M wall/undergroundMains Voltage Detection: 0 0.4 MSafety: EN 61010 -1Over Voltage Category: CAT 111 300 VPower Supply: 9 V and 2 x AAA batteriesDimensions: 192 x 61 x 37 mmWeight: 180gIncludes: Dilog DL2080 Cable Locator Transmitter Dilog DL2080 Cable Locator Receiver Fuse Finders / Cable Locators http://www.pat-services.co.uk/dilog-dl2080-cable-locator-set-1272.htm http://www.pat-services.co.uk/dilog-dl1092-socket-tester-1270.htm The simple and reliable test for correct socket wiring.DiLog DL1092 Socket Tester features: RCD and Earth Voltage Test Clear visual and audible (buzzer) indication RCD test of 30 mA RCD (max time 300 ms) Touch voltage to check for extraneous voltage on earth Compact, durable design in compliance with BS EN 61010DiLog DL1092 Socket Tester specifications:Display: 3 LEDs and buzzerVoltage Range: 230 V +- 10%RCD Test: up to 300mS @30mAOvervoltage Category: CAT II 600 VPower Supply: From circuit under testDimensions: 69 x 67 x 32 mmWeight: 71g Socket Testers http://www.pat-services.co.uk/dilog-dl1092-socket-tester-1270.htm http://www.pat-services.co.uk/dilog-dl1090-socket-tester-1268.htm The simple and reliable test for correct socket wiring.DiLog DL1090 Socket Tester features: Clear visual and audible (buzzer) indication of wiring status LED indication of a wide range of wiring conditions Designed to EN 61010 and IP30DiLog DL1090 Socket Tester specifications:Power supply: From circuit under testDimensions: 70 x 63 x 55mmWeight: 60g Socket Testers http://www.pat-services.co.uk/dilog-dl1090-socket-tester-1268.htm http://www.pat-services.co.uk/dilog-cp1190-soft-carry-case-1266.htm DiLog CP1190 Soft Carry Case can be used as a Voltage Tester carry case and Continuity Tester carry case.The soft carry case comes with a belt loop and measures 290 x 75 x 45mm.Ideal case to store your:DiLog DL6790 CombiVolt 2 Voltage/Continuity TesterDiLog DL6780 CombiVolt 1 Voltage/Continuity Tester Accessories http://www.pat-services.co.uk/dilog-cp1190-soft-carry-case-1266.htm http://www.pat-services.co.uk/fluke-ti25-thermal-imaging-camera-1264.htm The ultimate tool for troubleshooting and maintenance!The Fluke Ti25 Thermal Imager Camera is the perfect tool to add to your problem solving arsenal. Built for tough work environments, this high-performance, fully radiometric infrared camera is ideal for troubleshooting electrical installations, electro-mechanical equipment, process equipment, HVAC/R equipment and others.IR-Fusion TechnologyThe Fluke Ti25 Thermal Imaging Camera comes complete with IR-Fusion technology.  See things both waysinfrared and visual (visible light) images are combined together communicating critical information faster and easiertraditional infrared images are no longer enough. IR-Fusion, a patent-pending technology that simultaneously captures a digital photo in addition to the infrared image and fuses it together taking the mystery out of IR image analysis.Fluke Ti25 Thermal Imaging Camera Features: Enhanced problem detection and analysis capabilities with IR-Fusion Technology. Simply scroll through the different viewing modes quickly to better identify trouble areas in Full IR thermal, picture-in-picture, or automatic blend visual and thermal images Optimised for field use in harsh work environments Engineered and tested to withstand a 2 m (6.5 ft) dropWhen was the last time you dropped a tool? Withstands dust and watertested to an IP54 rating Delivers the clear, crisp images needed to find problems fast Identify even small temperature differences that could indicate problems with excellent thermal sensitivity (NETD) Intuitive, three-button menu is easy to usesimply navigate with the push of a thumb No need to carry pen and paperrecord findings by speaking into the Fluke Ti25 Infrared Camera. Voice annotations can be recorded with every image you take. Voice comments are saved along with individual images for future reference Everything needed to get started is included Adjustable hand strap for left-or right-handed useFluke Ti25 Thermal Imager Included Accessories: Thermal Imaging Camera w/ 20 mm lens AC power supply/battery charger (including mains adaptors) SD memory card SD card reader (USB) for downloading images into your computer SmartView software Rugged hard carrying case Soft transport bag Hand strap Users manualIncludes Calibration CertificateOther Fluke Thermal Imaging Cameras:Fluke Ti9, Fluke TiRx, Fluke TiR, Fluke TiR1, Fluke Ti10Click here for Thermal Imaging (Imager) Camera information. Electrical Applications http://www.pat-services.co.uk/fluke-ti25-thermal-imaging-camera-1264.htm http://www.pat-services.co.uk/socket-lockit-locking-device-1259.htm The Socket & See Lockit & See Locking Off Device is a simple and easy to use way to make installations safe.  It is universal and will fit most makes of MCB.  No more padlock keys will be required as the Lockit & See comes with a combination code lock.Features of the Lockit & See Locking Off Device: Good practice says lock off makes the installation safe A universal lock off device which will fit most known makes of MCB No more fiddling around looking for the correct one in a kit Really easy to use, set your own combination lock, no more padlock keys Shackle for hanging warning notice if required Save money, no more expensive heavy lock out kits requiredOther Locking Off Devices:Kewtech Kewlok Locking Off Device Fuse Finders / Cable Locators http://www.pat-services.co.uk/socket-lockit-locking-device-1259.htm http://www.pat-services.co.uk/omegapat-mi-3305-kit-4-1256.htm An excellent kit to download, maintain and manage your PAT Testing results with a scanner for faster and easier PAT Testing!! Metrel OmegaPAT Plus MI 3305 Kit 4 - Data Management PAT Tester Kit with Scanner includes:  Metrel BetaPAT Plus MI 3305 PAT Tester SimplyPATs Version 6 Software Barcode Scanner 1000 Barcode Labels 1000 Passed Labels 500 Failed Labels 500 Cable Wraps Socket & See SOK 22 Socket Tester 230v Plug (13amp) to IEC Socket IEC Socket to 110v Plug (16amp) Also comes supplied with: Earth Bond Clip Flash test probe PRCD test probe PC SW PAT Link with RS232 and USB cable Instruction manual Product verification dataMetrels top of the range PAT Tester is capable of testing portable electrical appliances, IT equipment, IEC cords and portable RCDs with corresponding IEC/EN and VDE standards.The NEW Metrel OmegaPAT Plus MI 3305 is suitable for periodic testing, troubleshooting or as a tool for electrical safety in workshops. It can be connected to 115 V and 230 V mains supply voltage. Instruments are placed in robust, waterproof case with build in carrying handle.This tester has all the functions to speed up your PAT Testing.  The OmegaPAT Plus MI 3305 comes with over 100 pre-programmed auto test sequences, covering most of the test requirements you will come across. You can also define up to 50 additional customised auto tests. Full QWERTY keyboard allows easy data entries.The following tests are supported: Earth bond continuity test with currents up to 25 A Insulation resistance Leakage current (differentinal, substitute and touch) Functional test Dielectric withstanding test 1500 V and 3000 V AC (Flash test) Polarity test of IEC cord TRMS leakage and load current measurement using clamp current adapter and Trip-out time measurement of portable RCDsKey features of the Metrel OmegaPAT Plus MI 3305 include: USB Support User-friendly graphic user interface (GUI) Instrument personalisation to user needs, Barcode reader and serial printer support Saving auto test results with important information Quickly searching of test results using special filters Downloading/uploading auto test results to/from PC, test results comparison/trends and label printingCalibration is included FREE. Metrel OmegaPAT Plus MI 3305 PAT Tester Kits http://www.pat-services.co.uk/omegapat-mi-3305-kit-4-1256.htm http://www.pat-services.co.uk/betapat-mi-3304-kit-4-1254.htm An excellent kit to download, maintain and manage your PAT Testing results with a scanner for faster and easier PAT Testing!! Metrel BetaPAT Plus MI 3304 Kit 4 - Data Management PAT Tester Kit with Scanner includes: Metrel BetaPAT Plus MI 3304 PAT Tester SimplyPATs Version 6 Software Barcode Scanner 1000 Barcode Labels 1000 Passed Labels 500 Failed Labels 500 Cable Wraps Socket & See SOK 22 Socket Tester 230v Plug (13amp) to IEC Socket IEC Socket to 110v Plug (16amp)Also comes supplied with: Earth Bond Clip PRCD test probe PC SW PAT Link with RS232 and USB cable Instruction manual Product verification dataMetrels top of the range PAT Tester is capable of testing portable electrical appliances, IT equipment, IEC cords and portable RCDs with corresponding IEC/EN and VDE standards.The NEW Metrel BetaPAT Plus MI 3304 is suitable for periodic testing, troubleshooting or as a tool for electrical safety in workshops. It can be connected to 115 V and 230 V mains supply voltage. Instruments are placed in robust, waterproof case with build in carrying handle.This tester has all the functions to speed up your PAT Testing.  The BetaPAT MI 3304 comes with over 100 pre-programmed auto test sequences, covering most of the test requirements you will come across. You can also define up to 50 additional customised auto tests. Full QWERTY keyboard allows easy data entries.The following tests are supported: Earth bond continuity test with currents up to 25 A Insulation resistance Leakage current (differentinal, substitute and touch) Functional test Polarity test of IEC cord TRMS leakage and load current measurement using clamp current adapter and Trip-out time measurement of portable RCDsKey features of the Metrel BetaPAT Plus MI 3304 include: USB Support User-friendly graphic user interface (GUI) Instrument personalization to user needs, Barcode reader and serial printer support Saving auto test results with important information Quickly searching of test results using special filters Downloading/uploading auto test results to/from PC, test results comparison/trends and label printingCalibration is included FREE. Metrel BetaPAT Plus MI 3304 PAT Tester Kits http://www.pat-services.co.uk/betapat-mi-3304-kit-4-1254.htm http://www.pat-services.co.uk/seaward-powerplus-advanced-powersolutions-1252.htm PowerSolutions packages are designed to increase efficiency and profitability of installation test and inspection.Seaward's totally unique PowerSolutions allows you to devote your time to the skilled task of carrying out test and inspection work via one compact handheld multifunction test and inspection unit.  No pens, pencils or PDA is required, eleiminating repetition when you carry out your work.  Just load the 17th Edition certificate into the PowerPlus 1557, carry out the test and inspection, download the certificate and print.  EASY!Seaward PowerPlus 1557 Advanced PowerSolutions Kit includes:As Seaward PowerPlus 1557 Professional PowerSolutions Kit PLUS: Portable Test n Tag Printer Carrying case for printer Self-laminating wire marker cartridge Laminated label cartridgeTraditional methods of inspection and testing require a multi-function installation tester and some additional means of recording inspection and test results. This can be a pad and paper or a PDA device running some appropriate software. Why purchase a tester and a PDA? Why carry around a tester and a PDA? A replica of the inspection and test certificate is held directly on the PowerPlus 1557 allowing the user to record test and inspection data in the field. At the end of the day the PowerPlus 1557 can be synchronised with the accompanying PC software.Built in certificates include Electrical Installation, Periodic Inspection report and Minor Works certificate for domestic and commercial sites.Seaward PowerPlus 1557 key features include: Worlds first combined test and inspection unitRecord test and inspection data directly on the tester, no need for reams of paper or additional PDA devices. Fast and efficient High performance4 readings in 5 seconds at the press of a button; Loop Impedance, Line Impedance, PSC, PFC. Total AccuracyTest results can be checked and validated on-site. Bluetooth download and upload to PCWide variety of certificate templates can be loaded using the accompanying PowerPlus PC software. After collection, field data can be transferred to certificates held on PC. Print certificatesBecause the built in 17th Edition certificates are completed within the tester, when results are downloaded, they can be printed directly onto paper and supplied to the client. Future proofNew templates can be added as new certificates emerge. Comprehensive testing featureEarth continuity, Insulation (100V, 250V, 500V, 1000V), Non-trip loop impedance, Line Impedance, PFC, PSC, RCD trip current, RCD trip time, RCD Auto test sequence, Voltage / Frequency, Phase rotation.Applications:The PowerPlus 1557 is used for inspection and testing of fixed installations. Installation Testers http://www.pat-services.co.uk/seaward-powerplus-advanced-powersolutions-1252.htm http://www.pat-services.co.uk/seaward-powerplus-professional-powersolutions-1250.htm PowerSolutions packages are designed to increase efficiency and profitability of installation test and inspection.Seaward's totally unique PowerSolutions allows you to devote your time to the skilled task of carrying out test and inspection work via one compact handheld multifunction test and inspection unit.  No pens, pencils or PDA is required, eleiminating repetition when you carry out your work.  Just load the 17th Edition certificate into the PowerPlus 1557, carry out the test and inspection, download the certificate and print.  EASY!Seaward PowerPlus 1557 Professional PowerSolutions Kit includes: PowerPlus 1557 Installation Tester Quickstart Guide PowerPlus PC software installer CD USB Bluetooth adaptor Cordless probe 1.2m black test lead + crocodile clip 1.2m red test lead + crocodile clip 1.2m green test lead + crocodile clip Re-chargable batteries + charger Mains lead Carrying case + strapTraditional methods of inspection and testing require a multi-function installation tester and some additional means of recording inspection and test results. This can be a pad and paper or a PDA device running some appropriate software. Why purchase a tester and a PDA? Why carry around a tester and a PDA? A replica of the inspection and test certificate is held directly on the PowerPlus 1557 allowing the user to record test and inspection data in the field. At the end of the day the PowerPlus 1557 can be synchronised with the accompanying PC software.Built in certificates include Electrical Installation, Periodic Inspection report and Minor Works certificate for domestic and commercial sites.Seaward PowerPlus 1557 key features include: Worlds first combined test and inspection unitRecord test and inspection data directly on the tester, no need for reams of paper or additional PDA devices. Fast and efficient High performance4 readings in 5 seconds at the press of a button; Loop Impedance, Line Impedance, PSC, PFC. Total AccuracyTest results can be checked and validated on-site. Bluetooth download and upload to PCWide variety of certificate templates can be loaded using the accompanying PowerPlus PC software. After collection, field data can be transferred to certificates held on PC. Print certificatesBecause the built in 17th Edition certificates are completed within the tester, when results are downloaded, they can be printed directly onto paper and supplied to the client. Future proofNew templates can be added as new certificates emerge. Comprehensive testing featureEarth continuity, Insulation (100V, 250V, 500V, 1000V), Non-trip loop impedance, Line Impedance, PFC, PSC, RCD trip current, RCD trip time, RCD Auto test sequence, Voltage / Frequency, Phase rotation.Applications:The PowerPlus 1557 is used for inspection and testing of fixed installations. Installation Testers http://www.pat-services.co.uk/seaward-powerplus-professional-powersolutions-1250.htm http://www.pat-services.co.uk/seaward-powerplus-1557-1248.htm Traditional methods of inspection and testing require a multi-function installation tester and some additional means of recording inspection and test results. This can be a pad and paper or a PDA device running some appropriate software. Why purchase a tester and a PDA? Why carry around a tester and a PDA? A replica of the inspection and test certificate is held directly on the PowerPlus 1557 allowing the user to record test and inspection data in the field. At the end of the day the PowerPlus 1557 can be synchronised with the accompanying PC software.Built in certificates include Electrical Installation, Periodic Inspection report and Minor Works certificate for domestic and commercial sites.Seaward PowerPlus 1557 key features include: Worlds first combined test and inspection unitRecord test and inspection data directly on the tester, no need for reams of paper or additional PDA devices. Fast and efficient High performance4 readings in 5 seconds at the press of a button; Loop Impedance, Line Impedance, PSC, PFC. Total AccuracyTest results can be checked and validated on-site. Bluetooth download and upload to PCWide variety of certificate templates can be loaded using the accompanying PowerPlus PC software. After collection, field data can be transferred to certificates held on PC. Print certificatesBecause the built in 17th Edition certificates are completed within the tester, when results are downloaded, they can be printed directly onto paper and supplied to the client. Future proofNew templates can be added as new certificates emerge. Comprehensive testing featureEarth continuity, Insulation (100V, 250V, 500V, 1000V), Non-trip loop impedance, Line Impedance, PFC, PSC, RCD trip current, RCD trip time, RCD Auto test sequence, Voltage / Frequency, Phase rotation.Applications:The PowerPlus 1557 is used for inspection and testing of fixed installations. Installation Testers http://www.pat-services.co.uk/seaward-powerplus-1557-1248.htm http://www.pat-services.co.uk/kew-technik-craftsman-plus-test-1246.htm As PKIT 330 PLUS:FREE FFCB 100UKA Easy Fuse Finder Kit Quick Proving UnitSP 200 Voltage TesterMT 401 Digital MultimeterDM 240 Plus Automatic Wire StripperWS 250 1000V Cable ShearsCS 0340 Universal KeyUKEY 01 Re-ThreaderKTRT 0235L Bush SpannerBS 2025 Groove Joint PliersGJP 0310A Insulation / Continuity http://www.pat-services.co.uk/kew-technik-craftsman-plus-test-1246.htm http://www.pat-services.co.uk/craftsman-test-tool-kit-1244.htm As PKIT 320 PLUS: Full Check BoxCB 200 Craftsman Socket Testerwith SOK 12 upgraded toSOK 22 Slothead Terminal DriverTSD 0320S Crosshead Terminal DriverTSD 0320P Insulation / Continuity http://www.pat-services.co.uk/craftsman-test-tool-kit-1244.htm http://www.pat-services.co.uk/quick-test-plus-tool-kit-1242.htm As PKIT 310 PLUS: Socket Interface ConnectorSS 130 Quick Test Socket TesterSOK 12 Light Fitting AdaptorsLKIT 10 165mm Electricians PliersEP 0106A 155mm Diagonal Cutting PliersDP 0106A 165mm Long Nose Combination PliersLP 0106AScrewdrivers: 4 Slothead / 2 CrossheadPower Grip ScrewdriversSS 612265 (-) 6.5mm 1/4inSS 612255 (-) 5.5mm 7/32inSP 6122PZ2 (+) No 2SS 612240 (-) 4.0mm 5/32inSP 6122PZ1 (+) No 1SS 612235 (-) 3.5mm 5/32in Insulation / Continuity http://www.pat-services.co.uk/quick-test-plus-tool-kit-1242.htm http://www.pat-services.co.uk/quick-test-tool-kit-1240.htm TECC 70 Heavy Duty Case containing: Insulation/Continuity TesterPDIT 360 Multifunction Digital RCD TesterPDRC 380 Multifunction Loop TesterPDL 310 Test Lead KitITLS 400 Non Fused Test Lead KitIT 001 Test Equipment Accuracy RecordEAR 005 3 Sets of BatteriesSBX 4AA 2 x 13A Plug to IECFemale ConnectorIECP UKA Insulation / Continuity http://www.pat-services.co.uk/quick-test-tool-kit-1240.htm http://www.pat-services.co.uk/kew-technik-utility-tool-kit-1238.htm CTB 0522 Tool Box containing: Socket Set 1/2in DriveRSS 19 200mm Combination PlierESP 0408A 1000V 160mm Long Nose PlierESL 0406A 1000V 200mm Diagonal Cutting PlierESC 0408A 1000V Ratchet Crimping ToolCTR 0323 Professional HacksawHSP 0312 300mm Junior HacksawHSP 0606 150mm Scutch Chisel Set, 3 PieceKTSC 0577 Chalk Line C/W Chalk PowderCL 1630 Hardpoint Dry Wall SawSW 12N Pin HammerHP 0335 Professional Claw HammerHDP 0320 20oz Club HammerHDC 0610 Fold Away Metric Hex Key SetHK 037 Spirit LevelSLM 0806A 200mm Cable StrippersWS 828 Adjustable SpannerAS 0306 150mm Tape Measure, Metric/Imperial BladeHV 0305 5m File Set, 3 PieceFF 03KIT Cable ShearCS 0360 230mm Wire Strippers AutomaticWS 250 Electricians ChiselCF 0525 Brass Padlock, Steel HaspPLBH 40 Long Neck 40mm Water Pump PlierGJP 0310A 255mmScrewdrivers: 3 Slothead / 2 POZI1000V ScrewdriversSS 612265 (-) 6.5mm 1/4inSS 612255 (-) 5.5mm 7/32inSP 6122PZ2 (+) No 2SS 612240 (-) 4mm 5/32in SP 6122PZ1 (+) No 1SS 612235 (-) 3.5mm 5/32in Electrical Tool Kits http://www.pat-services.co.uk/kew-technik-utility-tool-kit-1238.htm http://www.pat-services.co.uk/kew-technik-college-tool-kit-1236.htm Developed in conjunction with a leading technical college Ideal for apprentices and new starters Supplied in robust zip-up tool case with divider and storage room for documents Fantastic savings over individually purchased toolsTH 03914A Zip Up Tool Case containing: Long Nose Combination PliersLP 0106A 165mm 6 1/2in Diagonal Cutting PliersDP 0106A 150mm 6 1/2in Electricians Combination PliersEP 0108A 205mm 8in Junior HacksawHSP 0606 150mm 6in 5m 16ft Tape Measure HV 0305 Retractable Utility Knife UK 0306 Neon ScrewdriverVNS 1407 140mm 5 1/2in Terminal DriverTSD 0320S 180mm 7inScrewdrivers: 3 Slothead / 2 CrossheadScrewdrivers Soft Grip 1000VSS 612265 (-) 6.5mm 1/4inSS 612255 (-) 5.5mm 7/32inSP 6122PZ2 (+) No 2SS 612235 (-) 3.5mm 5/32inSP 6122PZ1 (+) No 1 Electrical Tool Kits http://www.pat-services.co.uk/kew-technik-college-tool-kit-1236.htm http://www.pat-services.co.uk/16-piece-tool-kit-1234.htm FREE SOK 22 Craftsman Socket TesterTR 0514B Heavy Duty Waxed Canvas 14 Pocket Tool Roll containing: Electricians Combination PliersEPC 0109A 230mm 9in +EP 0106A 165mm 6 1/2in Diagonal Cutting PliersDP 0108A 210mm 7 1/4in +DP 0106A 150mm 6in Long Nose Combination PliersLP 0108A 200mm 8in Insulated Wire StripperSP 1006A 160mm 6 1/4in Cable ShearsCS 0338 215mm 8 1/4in Retractable Utility Knife UK 0306Screwdrivers: 3 Slothead / 2 CrossheadScrewdrivers Soft Grip 1000VSS 612265 (-) 6.5m 1/4inSS 612255 (-) 5.5mm 7/32inSP 6122PZ2 (+) No 2SS 612235 (-) 3.5mm 5/32inSP 6122PZ1 (+) No 1 Precision Screwdriver SetETSK 0303Slothead (-) 3.0mm 1/8inSlothead (-) 2.5mm 3/32inCrosshead (+) No 0 Electrical Tool Kits http://www.pat-services.co.uk/16-piece-tool-kit-1234.htm http://www.pat-services.co.uk/1000v-11-piece-tool-kit-1232.htm FREE SOK 12 Quick Test Socket TesterTR 0514B Heavy Duty Canvas 14 pocket Tool Roll: Electricians Combination PliersEPC 0109A 230mm 9in +EP 0106A 165mm 6 1/2in Diagonal Cutting PliersDP 0108A 210mm 8 1/4in +DP 0106A 150mm 6in Long Nose Combination PliersLP 0108A 200mm 8in Insulated Wire StripperSP 1006A 160mm 6 1/4inScrewdrivers: 3 Slothead / 2 CrossheadScrewdrivers 1000VSS 612265 (-) 6.5mm 1/4inSS 612255 (-) 5.5mm 7/32inSP 6122PZ2 (+) No2SP 6122PZ1 (+) No1SS 612240 (-) 4.0mm 5/32in Electrical Tool Kits http://www.pat-services.co.uk/1000v-11-piece-tool-kit-1232.htm http://www.pat-services.co.uk/electronic-engineers-tool-kit-1230.htm Precision Electronic ToolsThese tool kits carry the tools most commonly used by the Electronics Engineer and have been designed for use in precision situations such as diagnosing and repairing computers, audio, TV, fax machines, telephones, photocopiers and other equipment. They are constructed from modern materials including Nickel Chrome Molybdenum Steels for maximum life. The electronic cutters and pliers all include spring loaded opening with comfortable cushioned handles.TH 03914A Robust Zip Up Tool Case with Detachable Divider containing: Electricians Combination PliersEP 0106A 165mm 6 1/2in Diagonal Cutting PliersDP 0106A 150mm 6in Long Nose Combination PliersLP 0106A 165mm 6 1/2in Retractable Utility Knife UK 0306 Precision 5 Piece Plier SetSO 601 Diagonal Side Cutter 110mm Snipe Nose 150mm End Cutter 100mm Flat Jaw 125mm Combination Plier 125mmScrewdrivers: 4 Slothead / 2 CrossheadScrewdrivers Power Grip 1000VSS 612265 (-) 6.5mm 1/4inSS 612255 (-) 5.5mm 7/32inSP 6122PZ2 (+) No 2SS 612240 (-) 4.0mm 5/32inSP 6122PZ1 (+) No 1SS 612235 (-) 3.5mm 5/32in Terminal Driver SetKTK TSD7Slotted (-) 1.5mm 3/32inSlotted (-) 1.8mm 1/16inSlotted (-) 2.0mm 1/16inSlotted (-) 2.5mm 1/8inSlotted (-) 3.0mm 1/8inPhillips (+) PH00Phillips (+) PH0NCT 0314 (-) 3.5 5/32inNeed a Multimeter?  Then check out:Socket & See MT 21A MultimeterAC Volts 2 - 20 - 200 - 450VDC Volts 200mV - 2-20 - 200 - 450VResistance - 200ohm - 2 - 20 - 200 -2000k ohm - 20M ohmAudible continuity buzzerBuilt in red and black test leads/probesFunction selectorRange hold/manual override switchDigital Multimeter Data hold facility Electrical Tool Kits http://www.pat-services.co.uk/electronic-engineers-tool-kit-1230.htm http://www.pat-services.co.uk/craftsman-starter-tool-kit-1228.htm TH 03914A Robust Zip-Up Nylon Tool Case With Divider Containing: Electricians Combination PliersEP 0106A 165mm 6 1/2in Diagonal Cutting PliersDP 0106A 150mm 6in Retractable Utility Knife UK 0306 Junior Hacksaw HSP 0606 150mm 6in Tape Measure HV 0305 5M 16ft Magnetic Spirit LevelSLM 0806A 200mm 8inScrewdrivers: 1 Slothead / 1 CrossheadScrewdriver Power Grip 1000VSS 612255 (-) 5.5mm 7/32inSP 6122PZ2 (+) No 2 Insulated Terminal DriverTSD 0320S (-) 3.5mm 5/32in Insulated Terminal DriverTSD 0320P (+) Pozi 0 Neon ScrewdriverVNS 1407 (-) 3.0mm 1/8in Electrical Tool Kits http://www.pat-services.co.uk/craftsman-starter-tool-kit-1228.htm http://www.pat-services.co.uk/seaward-primetest-350-kit-5-1226.htm An excellent professional PAT testing kit with PATGuard Elite Software for data management and a Barcode Scanner to speed up your testing!  We've also included a Test 'n' Tag Elite printer to save even more time  Seaward PrimeTest 350 Kit 5 - Ultimate Printer PAT Tester Kit includes: Seaward PrimeTest 350 PAT Tester Seaward Test n Tag Elite Printer Seaward PATGuard Elite V2 Software Bluetooth Barcode Scanner Socket & See SOK 32 Professional Socket Tester 230v Plug (13amp) to IEC Socket IEC Socket to 110v Plug (16amp) Delux Carry Case for easy transportation and protection of your PAT Testing Kit!  Comes with customisable foam, so you can snugly fit whatever equipment you would like to take on siteThe PrimeTest 350 is supplied with: Soft Carry Case Test Lead and Crocodile Clip Earth Bond Lead Mains Lead 6 AA In-Situ Rechargeable Batteries Battery Charger 240v Plug to 110v Adapter for testing 110v appliances RS232 Download Lead USB to Serial Adaptor (to connect your Seaward PrimeTest 350 to the PC) Reference Guide Instruction Manual with CD The Seaward PrimeTest 350 is ideal for PAT Testers, Electrical Contractors, Facilities Managers and Manufacturers. Thanks to the revolutionary PrimeTest 350 PAT Tester, you can shorten your working hours because this top of the range PAT Tester is loaded with the latest technology making testing faster and more efficient. Bluetooth technology means it communicates with all your Bluetooth accessories without using wires.  In fact, there are no wires at all because it runs on high powered In-Situ rechargeable batteries so youre free to move from test to test.  Weighing in at under 1kg and measuring only 26 x 10cm makes the PrimeTest 350 the ideal tester for getting into hard to reach places. The PrimeTest 350 PAT Tester is a facilities management tool because through data logging and capture it also records asset location helping you meet Health and Safety standards.  Whats more, this PAT Tester does every test you need to meet the IET Code of Practice revisions. Thanks to the revolutionary PrimeTest 350 PAT Tester, you can shorten your working hours because this top of the range PAT Tester is loaded with the latest technology making testing faster and more efficient. Bluetooth technology means it communicates with all your Bluetooth accessories without using wires.  In fact, there are no wires at all because it runs on high powered In-Situ rechargeable batteries so youre free to move from test to test.  Weighing in at under 1kg and measuring only 26 x 10cm makes the PrimeTest 350 the ideal tester for getting into hard to reach places. The PrimeTest 350 PAT Tester is a facilities management tool because through data logging and capture it also records asset location helping you meet Health and Safety standards.  Whats more, this PAT Tester does every test you need to meet the IET Code of Practice revisions. Features of the PrimeTest 350: Hand Held Battery Powered Definable Test USB and Bluetooth Download 6 AA In-situ Rechargeable Batteries Alternative Leakage Test, as described in the IET Code of Practice. 250v Insulation Test.  For use when suppressors or other components prevent a 500V insulation test. Load Measurement. During the protective conductor and touch current tests, the load is measured and displayed as both a power and current measurement.Calibration is NOT included. Seaward PrimeTest 350 Kits http://www.pat-services.co.uk/seaward-primetest-350-kit-5-1226.htm http://www.pat-services.co.uk/seaward-primetest-350-kit-4-1224.htm An excellent professional PAT testing kit with PATGuard Pro Software for data management and a Barcode Scanner to speed up your testing!  We've also included a Test 'n' Tag Elite printer to save even more time  Seaward PrimeTest 350 Kit 4 - Pro Printer PAT Tester Kit includes: Seaward PrimeTest 350 PAT Tester Seaward Test n Tag Elite Printer Seaward PATGuard Pro V2 Software Bluetooth Barcode Scanner Socket & See SOK 32 Professional Socket Tester 230v Plug (13amp) to IEC Socket IEC Socket to 110v Plug (16amp) Delux Carry Case for easy transportation and protection of your PAT Testing Kit!  Comes with customisable foam, so you can snugly fit whatever equipment you would like to take on siteThe PrimeTest 350 is supplied with: Soft Carry Case Test Lead and Crocodile Clip Earth Bond Lead Mains Lead 6 AA In-Situ Rechargeable Batteries Battery Charger 240v Plug to 110v Adapter for testing 110v appliances RS232 Download Lead USB to Serial Adaptor (to connect your Seaward PrimeTest 350 to the PC) Reference Guide Instruction Manual with CD The Seaward PrimeTest 350 is ideal for PAT Testers, Electrical Contractors, Facilities Managers and Manufacturers. Thanks to the revolutionary PrimeTest 350 PAT Tester, you can shorten your working hours because this top of the range PAT Tester is loaded with the latest technology making testing faster and more efficient. Bluetooth technology means it communicates with all your Bluetooth accessories without using wires.  In fact, there are no wires at all because it runs on high powered In-Situ rechargeable batteries so youre free to move from test to test.  Weighing in at under 1kg and measuring only 26 x 10cm makes the PrimeTest 350 the ideal tester for getting into hard to reach places. The PrimeTest 350 PAT Tester is a facilities management tool because through data logging and capture it also records asset location helping you meet Health and Safety standards.  Whats more, this PAT Tester does every test you need to meet the IET Code of Practice revisions. Thanks to the revolutionary PrimeTest 350 PAT Tester, you can shorten your working hours because this top of the range PAT Tester is loaded with the latest technology making testing faster and more efficient. Bluetooth technology means it communicates with all your Bluetooth accessories without using wires.  In fact, there are no wires at all because it runs on high powered In-Situ rechargeable batteries so youre free to move from test to test.  Weighing in at under 1kg and measuring only 26 x 10cm makes the PrimeTest 350 the ideal tester for getting into hard to reach places. The PrimeTest 350 PAT Tester is a facilities management tool because through data logging and capture it also records asset location helping you meet Health and Safety standards.  Whats more, this PAT Tester does every test you need to meet the IET Code of Practice revisions. Features of the PrimeTest 350: Hand Held Battery Powered Definable Test USB and Bluetooth Download 6 AA In-situ Rechargeable Batteries Alternative Leakage Test, as described in the IET Code of Practice. 250v Insulation Test.  For use when suppressors or other components prevent a 500V insulation test. Load Measurement. During the protective conductor and touch current tests, the load is measured and displayed as both a power and current measurement.Calibration is NOT included. Seaward PrimeTest 350 Kits http://www.pat-services.co.uk/seaward-primetest-350-kit-4-1224.htm http://www.pat-services.co.uk/seaward-europa-pac-kit-3-1222.htm The Ultimate PAT Testing starter kit with data entry software for producing great results!  Includes a Microwave Leakage Detector to comply with new IEE regulations. Seaward Europa PAC Plus PAT Tester Kit 3 with Microwave Leakage Detector includes:  Seaward Europa PAC Plus PAT Tester Seaward PATGuard Lite V2 Software  Microwave Leakage Detector The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 500 Failed Labels 500 Cable Wraps  240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results)Also comes supplied with: Mains Lead Protective Rubber Cover Carry Case RS232 Download Lead Earth Bond Lead User Manual 240v Plug to 110v Adapter for testing 110v appliances The Seaward Europa PAC Plus is a Portable Appliance Tester which makes safety testing easy. New to the job? Or just after the simple life?! The success of the Europa PAC Plus PAT Tester is in its simplicity. It uses a large rotary switch to select the appropriate PAT test with clear indications on how to begin testing. The large display clearly shows the PAT test results. In short, the Europa PAC Plus is uncomplicated an easy to use PAT tester for anyone with basic training. This comprehensive PAT tester is portable too so can move from location to location quickly and easily. You can also take PAT test results with you, as the tester has a memory capacity of up to 100 tests. Theres no complicated menu to set up or navigate really its that easy. You can PAT test all equipment on the same day and can also undertake tests to ensure the appliance is safe after servicing. The large, easy view display allows you to see test results digitally, as well as having the ability to print them. This is PAT testing made easy. Features of the Seaward Europa PAC Plus: Easy to use manual tester Rotary switch for ease of use Ability to print test results Tests information technology equipment Accurate earth bond and leakage measurement even with multiple earths External Leakage Test Large full graphics displayCalibration is NOT included. Seaward Europa PAC Plus Kits http://www.pat-services.co.uk/seaward-europa-pac-kit-3-1222.htm http://www.pat-services.co.uk/kewtech-kt73-plus-kit-3-1220.htm The Ultimate PAT Testing starter kit with data entry software for producing great results!  Includes a Microwave Leakage Detector to comply with new IEE regulations. Kewtech KT73 Plus PAT Tester Kit 3 with Microwave Leakage Detector includes: Kewtech KT73 Plus PAT Tester  SimplyPATS Manual Software Microwave Leakage Detector Kewtech 103 Mains Wiring and Socket Checker The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 500 Failed Labels 500 Cable Wraps 240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results)Also comes supplied with: Mains Lead Earth Lead Instruction Manual The Kewtech KT73 Plus makes PAT testing simple and easy. This manual PAT tester is suitable for 230V and 110V portable electrical appliances.  It is housed in a robust style enclosure which will ensure that it continues looking good for years to come. The Kewtech KT73 Plus is capable of carrying out Fuse Tests, Earth Bond Tests at 100mA, 10A or 26A, Insultation tests at either 250V or 500V. Other functions include Load and Leakage Tests and IEC Lead Tests. Features of the Kewtech KT73 Plus: Earth bond 100mA/10A/26A Earth bond null 110V/230V appliances Fuse test and check Earth leakage at supply voltage Insulation test 250/500V DC Load test at supply voltage Calibration is NOT included. Kewtech KT73 Kits http://www.pat-services.co.uk/kewtech-kt73-plus-kit-3-1220.htm http://www.pat-services.co.uk/kewtech-kt73-plus-kit-2-1218.htm An excellent PAT Testing starter kit with data entry software for producing great results!  Kewtech KT73 Plus PAT Tester Kit 2 with Software includes: Kewtech KT73 Plus PAT Tester  SimplyPATS Manual Software Kewtech 103 Mains Wiring and Socket Checker The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 500 Failed Labels 500 Cable Wraps 240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results)Also comes supplied with: Mains Lead Earth Lead Instruction Manual The Kewtech KT73 Plus makes PAT testing simple and easy. This manual PAT tester is suitable for 230V and 110V portable electrical appliances.  It is housed in a robust style enclosure which will ensure that it continues looking good for years to come. The Kewtech KT73 Plus is capable of carrying out Fuse Tests, Earth Bond Tests at 100mA, 10A or 26A, Insultation tests at either 250V or 500V. Other functions include Load and Leakage Tests and IEC Lead Tests. Features of the Kewtech KT73 Plus: Earth bond 100mA/10A/26A Earth bond null 110V/230V appliances Fuse test and check Earth leakage at supply voltage Insulation test 250/500V DC Load test at supply voltageCalibration is NOT included. Kewtech KT73 Kits http://www.pat-services.co.uk/kewtech-kt73-plus-kit-2-1218.htm http://www.pat-services.co.uk/fluke-6200-pat-kit-3-1216.htm The Ultimate PAT Testing starter kit with data entry software for producing great results!  Includes a Microwave Leakage Detector to comply with new IEE regulations. Fluke 6200 PAT Tester Kit 3 with Microwave Leakage Detector includes:  Fluke 6200 PAT Tester  SimplyPATS Manual Software  Microwave Leakage Detector The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 500 Failed Labels 500 Cable Wraps 240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results) Also comes supplied with: Hard Carry Case Test Lead Test Probe Crocodile Clip Manual Rugged, compact and easy to use.  The Fluke 6200 is a great choice for all your PAT testing needs. The Fluke 6200 PAT tester has redefined auto test capabilities to help you increase the number of portable appliance tests performed per day. It's designed to enable you to work faster without compromising safety yours or your customers. Low weight The Fluke 6200 PAT Tester weighs approx. 3 kg, it is lightweight and very easy to carry around when working on-site. The hard carrying case (supplied) not only offers protection during transit but also includes extra storage space for accessories and other tools. Small size The Fluke 6200 is also extremely compact, and possesses Flukes traditional ruggedness to withstand working in the field. Packed with all the features you need for testing portable appliances, the Fluke 6200 PAT tester is a complete all-in-one solution. One-touch solution Pre-set test routines are initiated from a single button. This not only simplifies testing but also facilitates a faster, more efficient way of working. The fully automatic 6200 also includes user-definable test routines. Calibration is included FREE. Fluke 6200 Kits http://www.pat-services.co.uk/fluke-6200-pat-kit-3-1216.htm http://www.pat-services.co.uk/fluke-6200-pat-kit-2-1214.htm An excellent PAT Testing starter kit with data entry software for producing great results!   Fluke 6200 PAT Tester Kit 2 with Software includes:  Fluke 6200 PAT Tester  SimplyPATS Manual Software The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 500 Failed Labels 500 Cable Wraps 240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results)  Also comes supplied with: Hard Carry Case Test Lead Test Probe Crocodile Clip Manual Rugged, compact and easy to use.  The Fluke 6200 is a great choice for all your PAT testing needs. The Fluke 6200 PAT tester has redefined auto test capabilities to help you increase the number of portable appliance tests performed per day. It's designed to enable you to work faster without compromising safety yours or your customers. Low weight The Fluke 6200 PAT Tester weighs approx. 3 kg, it is lightweight and very easy to carry around when working on-site. The hard carrying case (supplied) not only offers protection during transit but also includes extra storage space for accessories and other tools. Small size The Fluke 6200 is also extremely compact, and possesses Flukes traditional ruggedness to withstand working in the field. Packed with all the features you need for testing portable appliances, the Fluke 6200 PAT tester is a complete all-in-one solution. One-touch solution Pre-set test routines are initiated from a single button. This not only simplifies testing but also facilitates a faster, more efficient way of working. The fully automatic 6200 also includes user-definable test routines.Calibration is included FREE. Fluke 6200 Kits http://www.pat-services.co.uk/fluke-6200-pat-kit-2-1214.htm http://www.pat-services.co.uk/metrel-mi3002-eurotest-dl-plus-1212.htm The MI 3002 EurotestDL is the ideal unit for engineers who perform high volume testing or work regularly on TT, TN and IT systems. Containing all the necessary tests for installation testing, the MI 3002 EurotestDL can also perform online voltage monitoring, and phase sequence testing. All results can be quickly saved and referenced on the unit while out on site and can be downloaded via the EuroLink Pro PLUS software, included in this kit, to the computer for evaluation of report generation after testing (Pro PLUS software automatically completes selected NICEIC forms). Key Features: Fuse Tables Built in fuse tables allow for automatic pass/fail evaluation of loop readings according to the regulations. Upgradable Unit can be upgraded to keep up to date with the latest regulations. Downloadable Downloads via RS232 or USB cable via the software included with the unit. Memory Unit stores up to 500 results in a multi-layer memory structure. Help screens Each test has their own individual help screen describing how to perform a measurement. Multi-system Testing Tests on TT and TN systems, IT systems and 110 V systems. Built-in Charger Unit has an inbuilt charging circuit and comes complete with a set of rechargeable NiMH batteries. Included In The Kit:  Instrument EurotestDL  Hard carry case (Pro/Pro Plus Kits only!) Mains measuring cable (1,5 m)  Tip commander (2 wire)  RS232 FW upgrade cable (RS232/PS cable)  Test probes (green)  Test probes (brown)  Test probes (blue)  Croc clips (green)  Croc clips (brown)  Croc clips (blue)  Test cable Universal connection  3 x 1,5 m (3 wire lead)  USB cable  6 NiMh AA batteries  12 V adaptor mains lead  Universal 12 V adaptor  PC SW EuroLink Pro PLUS (Pro Plus Kits only!)  Manual on CD  Start-up guide  Quick test guide  Calibration certificate Installation Testers http://www.pat-services.co.uk/metrel-mi3002-eurotest-dl-plus-1212.htm http://www.pat-services.co.uk/metrel-mi3002-eurotest-dl-pro-1210.htm The MI 3002 EurotestDL is the ideal unit for engineers who perform high volume testing or work regularly on TT, TN and IT systems. Containing all the necessary tests for installation testing, the MI 3002 EurotestDL can also perform online voltage monitoring, and phase sequence testing. All results can be quickly saved and referenced on the unit while out on site and can be downloaded via the EuroLink Pro software, included in this kit, to the computer for evaluation of report generation after testing (optional Pro PLUS software automatically completes selected NICEIC forms). Key Features: Fuse Tables Built in fuse tables allow for automatic pass/fail evaluation of loop readings according to the regulations. Upgradable Unit can be upgraded to keep up to date with the latest regulations. Downloadable Downloads via RS232 or USB cable via the software included with the unit. Memory Unit stores up to 500 results in a multi-layer memory structure. Help screens Each test has their own individual help screen describing how to perform a measurement. Multi-system Testing Tests on TT and TN systems, IT systems and 110 V systems. Built-in Charger Unit has an inbuilt charging circuit and comes complete with a set of rechargeable NiMH batteries. Included In The Kit:  Instrument EurotestDL  Hard carry case (Pro/Pro Plus Kits only!) Mains measuring cable (1,5 m)  Tip commander (2 wire)  RS232 FW upgrade cable (RS232/PS cable)  Test probes (green)  Test probes (brown)  Test probes (blue)  Croc clips (green)  Croc clips (brown)  Croc clips (blue)  Test cable Universal connection  3 x 1,5 m (3 wire lead)  USB cable  6 NiMh AA batteries  12 V adaptor mains lead  Universal 12 V adaptor  PC SW EuroLink PRO  Manual on CD  Start-up guide  Quick test guide  Calibration certificate Installation Testers http://www.pat-services.co.uk/metrel-mi3002-eurotest-dl-pro-1210.htm http://www.pat-services.co.uk/fluke-ti9-thermal-imaging-camera-1208.htm You wont find a better or more rugged entry-level thermal imager camera than the Fluke Ti9. Just point and shoot to capture the full picture, showing the hotspots that warn of imminent equipment failure. The Fluke Ti9's 160 x 120 resolution shows all the essential details. That greatly increases the speed of inspecting, repairing and verifying electrical and (electro) mechanical equipment. It also helps extend equipment lifetime and avoid electrical fires. Rugged and easy to use The Fluke Ti9 Thermal Imaging Camera resists dust and water and withstands a drop test of 2 meters. And you can upgrade it with IR-Fusion to convert it to a full-featured Fluke Ti10 Thermal Imaging Camera with advanced analysis and reporting. Fluke Ti9 Thermal Imager Camera Features: Delivers clear, crisp images needed to find problems fast Optimised for field use in harsh work environments Engineered and tested to withstand a 2 m (6.5 ft) drop Withstands dust and watertested to an IP54 rating Intuitive, three-button menu is easy to usesimply navigate with the push of a thumb Adjustable hand strap for left-or right-handed use Everything needed to get started is included. Training DVD is now included free. See how easy it is to set up your thermal imager, create professional reports with SmartView software and learn thermography theory with step-by-step video instructions Included Accessories: SmartView software 2 GB SD card SD card reader Rugged hard carrying case Soft carrying case Hand strap Rechargeable battery AC charger/power supply User manual Thermal Imaging Training DVD - Learn thermography!Includes Calibration CertificateOther Fluke Thermal Imaging Cameras:Fluke TiRx, Fluke TiR, Fluke TiR1, Fluke Ti10, Fluke Ti25Click here for Thermal Imaging (Imager) Camera information. Electrical Applications http://www.pat-services.co.uk/fluke-ti9-thermal-imaging-camera-1208.htm http://www.pat-services.co.uk/metrel-mi3002-eurotest-dl-1206.htm The MI 3002 EurotestDL is the ideal unit for engineers who perform high volume testing or work regularly on TT, TN and IT systems. Containing all the necessary tests for installation testing, the MI 3002 EurotestDL can also perform online voltage monitoring, and phase sequence testing. All results can be quickly saved and referenced on the unit while out on site and can be downloaded via the EuroLink Pro software, included in this kit, to the computer for evaluation of report generation after testing (optional Pro PLUS software automatically completes selected NICEIC forms). Key Features: Fuse Tables Built in fuse tables allow for automatic pass/fail evaluation of loop readings according to the regulations. Upgradable Unit can be upgraded to keep up to date with the latest regulations. Downloadable Downloads via RS232 or USB cable via the software included with the unit. Memory Unit stores up to 500 results in a multi-layer memory structure. Help screens Each test has their own individual help screen describing how to perform a measurement. Multi-system Testing Tests on TT and TN systems, IT systems and 110 V systems. Built-in Charger Unit has an inbuilt charging circuit and comes complete with a set of rechargeable NiMH batteries. Included In The Kit:  Instrument EurotestDL  Soft carrying bag  Soft carrying neck belt  Mains measuring cable (1,5 m)  Tip commander (2 wire)  RS232 FW upgrade cable (RS232/PS cable)  Test probes (green)  Test probes (brown)  Test probes (blue)  Croc clips (green)  Croc clips (brown)  Croc clips (blue)  Test cable Universal connection  3 x 1,5 m (3 wire lead)  USB cable  6 NiMh AA batteries  12 V adaptor mains lead  Universal 12 V adaptor  PC SW EuroLink PRO  Manual on CD  Start-up guide  Quick test guide  Calibration certificate Installation Testers http://www.pat-services.co.uk/metrel-mi3002-eurotest-dl-1206.htm http://www.pat-services.co.uk/martindale-hpat600-kit-3-1204.htm An excellent PAT Testing Starter Kit!   Martindale HPAT600 PAT Tester Kit 3 includes: Martindale HPAT600 PAT Tester SimplyPats Manual Software Microwave Leakage Detector The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 500 Failed Labels 500 Cable Wraps 240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results) Delux Carry Case for easy transportation and protection of your PAT Testing Kit!  Comes with customisable foam, so you can snugly fit whatever equipment you would like to take on siteAlso comes supplied with: Carry case Earth Bond Lead Mains Lead and Car Charger 6 Rechargeable Batteries Crocodile Clip Manual Keyring Martindale HPAT600 Handy PAT information The HPAT600 Handy PAT is a fantastic little tester for all of the low volume users who record tests manually. This battery powered HPAT600 comes complete with mains charger and also a car charger to enable you to charge on the move should you need it. You will be able to carry out a full weeks testing on a full charge as the Handypat tester will test approx 700 tests on a full set of batteries. This little semi-automatic HPAT600 from Martindale has great features such as 250 volt insulation tests - No more worries about testing surge protected extension leads and adapters as they will fly through the insulation test with the handypat. Safe for testing IT equipment it carries out a 200mA earth bond test it also has a built in extension and IEC lead socket. You can also set your own pass and fail limits a feature more common with larger more expensive testers. The bright HPAT600 display is backlit with the press of a button. Another feature of the HPAT600 is the ability to carry out testing automatically or manually again a feature of more professional testers but there's even more! In manual mode for the complete novice you will see a diagram presented on how to carry out the test. Need to store results? It also comes with a 200 test result memory so that you can look back on your days testing and write the results down afterwards. The screen of the HPAT600 displays all of the readings as well as a pass or fail indication making it easy to use. Just to recap the main features of the HPAT600:  Easy-to-use  Safe for IT equipment  Compatible with Surge Adapters and Extensions  Backlit display  200 test memory  Battery powered  Rechargeable  Automatic or manual  Leakage test  700 tests on a set of batteries  One year warrantyCalibration certificate is NOT included. Martindale HPAT600 Kits http://www.pat-services.co.uk/martindale-hpat600-kit-3-1204.htm http://www.pat-services.co.uk/martindale-hpat600-kit-2-1202.htm An excellent PAT Testing Starter Kit!   Martindale HPAT600 PAT Tester Kit 2 includes: Martindale HPAT600 PAT Tester SimplyPats Manual Software The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 500 Failed Labels 500 Cable Wraps 240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results) Delux Carry Case for easy transportation and protection of your PAT Testing Kit!  Comes with customisable foam, so you can snugly fit whatever equipment you would like to take on siteAlso comes supplied with: Carry case Earth Bond Lead Mains Lead and Car Charger 6 Rechargeable Batteries Crocodile Clip Manual Keyring Martindale HPAT600 Handy PAT information The HPAT600 Handy PAT is a fantastic little tester for all of the low volume users who record tests manually. This battery powered HPAT600 comes complete with mains charger and also a car charger to enable you to charge on the move should you need it. You will be able to carry out a full weeks testing on a full charge as the Handypat tester will test approx 700 tests on a full set of batteries. This little semi-automatic HPAT600 from Martindale has great features such as 250 volt insulation tests - No more worries about testing surge protected extension leads and adapters as they will fly through the insulation test with the handypat. Safe for testing IT equipment it carries out a 200mA earth bond test it also has a built in extension and IEC lead socket. You can also set your own pass and fail limits a feature more common with larger more expensive testers. The bright HPAT600 display is backlit with the press of a button. Another feature of the HPAT600 is the ability to carry out testing automatically or manually again a feature of more professional testers but there's even more! In manual mode for the complete novice you will see a diagram presented on how to carry out the test. Need to store results? It also comes with a 200 test result memory so that you can look back on your days testing and write the results down afterwards. The screen of the HPAT600 displays all of the readings as well as a pass or fail indication making it easy to use. Just to recap the main features of the HPAT600:  Easy-to-use  Safe for IT equipment  Compatible with Surge Adapters and Extensions  Backlit display  200 test memory  Battery powered  Rechargeable  Automatic or manual  Leakage test  700 tests on a set of batteries  One year warrantyCalibration certificate is NOT included. Martindale HPAT600 Kits http://www.pat-services.co.uk/martindale-hpat600-kit-2-1202.htm http://www.pat-services.co.uk/kewtech-kt71-kit-3-1200.htm The Ultimate PAT Testing starter kit with data entry software for producing great results!  Includes a Microwave Leakage Detector to comply with new IEE regulations.   Kewtech KT71 PAT Tester Kit 3 includes:  Kewtech KT71 PAT Tester  SimplyPATS Manual Software  Microwave Leakage Detector The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 500 Failed Labels 500 Cable Wraps  240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results) Delux Carry Case for easy transportation and protection of your PAT Testing Kit!  Comes with customisable foam, so you can snugly fit whatever equipment you would like to take on siteAlso comes supplied with: Mains Lead Test Lead/Crocodile Clip  Instruction Manual Soft Carry Case Easy and Safe Testing - Great for low level users! The KT71 makes PAT Testing easy and safe. In house maintenance staff who conduct their own yearly PAT Testing and electrical contractors who need to have a PAT testing capability, but for whom it is not core for their business, can easily be trained to use this instrument with complete safety. LED indictators give visual pass/fail indication with limits set in accordance with the IET (IEE) code of practice. This means that, in most cases, users will not have to interpret the results. When switching to live testing (in leakage current mode) audible warnings are given that the appliance is about to come live. A double button press is also required to safeguard against inadvertent switching on of an appliance. Features of the Kewtech KT71:  Class I Test It automatically goes through the test sequence, for example, it performs the sequence of an earth bond test at 200mA, followed by a check to see whether the user has not forgotten to switch the instrument on, then an insultation test. The insultation test has a 250V or 500V option and the test sequence also has an option whether a leakage current test is done instead of an insultation test. This corresponds to the IEE Code of Practice which supports a leakage test where insultation tests cannot be safely conducted. Class I 20A test Performs the sequence of an earth bond test at 20A, followed by a check to see whether the user has not forgotten to switch the instrument on, then an insulation test. The insulation test has a 250V or 500V option and the test sequence has an alternative of a leakage current test instead of the insultation test. This corresponds to the IEE code of Practice which supports a leakage test where insultation tests cannot be safely conducted or are suspect. Class II Test The Class II sequence tests whether the appliance is switched on and then runs an insulation test. A leakage current test (touch current test) can be conducted as an alternative. Leakage Current (Touch Current) Test The Leakage Current Test is conducted at mains voltage, a load test and a leakage test is undertaken and the results are shown alternatively on the screen. (Testing at mains voltage gives superior results than instruments that perform this by subsequent leakage tests). Extension Lead Test Tests Earth Continuity with 20A test current, insultation and polarity. An extension lead adapter comes with the KT71.Calibration is included FREE. Kewtech KT71 Kits http://www.pat-services.co.uk/kewtech-kt71-kit-3-1200.htm http://www.pat-services.co.uk/kewtech-kt71-kit-2-1198.htm An excellent PAT Testing starter kit with data entry software for producing great results!  Kewtech KT71 PAT Tester Kit 2 includes:  Kewtech KT71 PAT Tester  SimplyPATS Manual Software The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 500 Failed Labels 500 Cable Wraps 240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results) Delux Carry Case for easy transportation and protection of your PAT Testing Kit!  Comes with customisable foam, so you can snugly fit whatever equipment you would like to take on site Also comes supplied with: Mains Lead Test Lead/Crocodile Clip  Instruction Manual Soft Carry Case Easy and Safe Testing - Great for low level users! The KT71 makes PAT Testing easy and safe. In house maintenance staff who conduct their own yearly PAT Testing and electrical contractors who need to have a PAT testing capability, but for whom it is not core for their business, can easily be trained to use this instrument with complete safety. LED indictators give visual pass/fail indication with limits set in accordance with the IET (IEE) code of practice. This means that, in most cases, users will not have to interpret the results. When switching to live testing (in leakage current mode) audible warnings are given that the appliance is about to come live. A double button press is also required to safeguard against inadvertent switching on of an appliance. Features of the Kewtech KT71:  Class I Test It automatically goes through the test sequence, for example, it performs the sequence of an earth bond test at 200mA, followed by a check to see whether the user has not forgotten to switch the instrument on, then an insultation test. The insultation test has a 250V or 500V option and the test sequence also has an option whether a leakage current test is done instead of an insultation test. This corresponds to the IEE Code of Practice which supports a leakage test where insultation tests cannot be safely conducted. Class I 20A test Performs the sequence of an earth bond test at 20A, followed by a check to see whether the user has not forgotten to switch the instrument on, then an insulation test. The insulation test has a 250V or 500V option and the test sequence has an alternative of a leakage current test instead of the insultation test. This corresponds to the IEE code of Practice which supports a leakage test where insultation tests cannot be safely conducted or are suspect. Class II Test The Class II sequence tests whether the appliance is switched on and then runs an insulation test. A leakage current test (touch current test) can be conducted as an alternative. Leakage Current (Touch Current) Test The Leakage Current Test is conducted at mains voltage, a load test and a leakage test is undertaken and the results are shown alternatively on the screen. (Testing at mains voltage gives superior results than instruments that perform this by subsequent leakage tests). Extension Lead Test Tests Earth Continuity with 20A test current, insultation and polarity. An extension lead adapter comes with the KT71.Calibration is included FREE. Kewtech KT71 Kits http://www.pat-services.co.uk/kewtech-kt71-kit-2-1198.htm http://www.pat-services.co.uk/seaward-primetest-220-kit-3-1196.htm The Ultimate PAT Testing starter kit with data entry software for producing great results!  Includes a Microwave Leakage Detector to comply with new IEE regulations.  Seaward PrimeTest 220 PAT Tester Kit 3 includes: Seaward PrimeTest 220 PAT Tester SimplyPats Manual Software 500 Passed Labels 500 Failed Labels 500 Cable Wraps 240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results) Delux Carry Case for easy transportation and protection of your PAT Testing Kit!  Comes with customisable foam, so you can snugly fit whatever equipment you would like to take on siteAlso comes supplied with: Test Lead/Crocodile Clip  8 Rechargeable NiMH Batteries  Seaward Battery Charger  Charger Power Lead Instruction Manual  Mains Lead  Soft Carry Case The Seaward PrimeTest 220 is a PAT Tester and a Installation Checker in one.The Seaward PrimeTest 220 PAT Tester is great for professional PAT users such as PAT technicians and Service companies.    Like its brother, the Seaward PrimeTest 200, the Seaward PrimeTest 220 is no slouch.  In fact, this tester can out perform any other PAT Tester in its class. Utilising the hugely successful hand-held format the Seaward PrimeTest 220 is compact and full of great features. As the PrimeTest 220 is battery powered it gives you the freedom to move quickly from job to job. This PAT Tester has a comprehensive test list that features Class I and Class II testing, IT equipment testing and circuit testing. Its easy to see why the Seaward PrimeTest 220 is quickly becoming the tester other professionals have to beat. A great addition to any professionals armoury. Key features of the Seaward Primetest 220: Hand-held and Highly PortableLight and small enough to be held in the palm of your hand. A must for those who like to work fast without the need to pack-up your checker every five minutes. Battery PoweredA high powered battery gives you more than enough juice to do days of work without the need to recharge. There are no cables to mains sockets or additional equipment, making life much easier. Comprehensive TestingA mid-level, fully intergrated PAT Tester which does more tests than you can shake a stick at: Class I and II equipment including IT and business equipment, plus much more. Large LCD DisplayThe large, brightly lit display is a must for those dark and dingy jobs. Easy to see and easy to read say no to the possibility of mis-reading the information. Circuit Tester (Tests RCDs and Earth Loop Zs)- RCD Trip TimeTest Current: 30mATest Current Phase: 0C/180C auto switchedDisplay Range: 0ms 500ms- Earth Loop ResistanceTest Current: Non-tripping for > 30mA RCDDisplay Range: 0.00ohms 199ohms- Power Socket TestInput Voltage Range: 230V + 10%, -15% AC- IndicatorsPhase to Earth Voltage, Phase to Neutral Voltage, Neutral to Earth Seaward PrimeTest 220 Kits http://www.pat-services.co.uk/seaward-primetest-220-kit-3-1196.htm http://www.pat-services.co.uk/seaward-primetest-microwave-leakage-detector-1194.htm The Ultimate PAT Testing starter kit with data entry software for producing great results!  Includes a Microwave Leakage Detector to comply with new IEE regulations. Seaward PrimeTest 200 PAT Tester Kit 3 includes: Seaward PrimeTest 200 PAT Tester  SimplyPats Manual Software Microwave Leakage Detector 500 Passed Labels 500 Failed Labels 500 Cable Wraps 240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results) Delux Carry Case for easy transportation and protection of your PAT Testing Kit!  Comes with customisable foam, so you can snugly fit whatever equipment you would like to take on siteAlso comes supplied with: Lead Set  6 AA Batteries Instruction Manual Soft Carry Case The PrimeTest 200 is a 3-IN-1 MULTI-TESTER. This battery powered tester is  fast, efficient and convenient. It is Ideal for service companies and maintenance staff who have to carry out PAT testing, installation checking, digital multimeter readings and temerature measurements. There is nothing worse than carrying a ton of equipment around on site to do a few simple tests. The PrimeTest 200 is the answer; Class I, Class II and IT equipment test are a doddle, as are installation Tests or DMM readings. Ten measurement functions make the PrimeTest 200 a very versatile answer to any professional testers toolbox. Designed to be hand held, the Primetest 200 is easy to use and totally effective. Battery power makes it light and portable, and with no cables to slow you down, you will be flying from job to job. The heavy duty casing ensures its going to last a very long time. This is the Rolls Royce of multi-testers; smooth and refined.  Features of the Seaward PrimeTest 200: Battery driven for mains free working Rotary switch test selection Single test button action Tests Class I and Class II equipment Tests Extension and IEC leads Insulation, Continuity, Socket polarity and RCD tests Clear pass/fail indication for easy useCalibration is NOT included. Seaward PrimeTest 200 Kits http://www.pat-services.co.uk/seaward-primetest-microwave-leakage-detector-1194.htm http://www.pat-services.co.uk/seaward-primetest-microwave-leakage-detector-1192.htm The Ultimate PAT Testing starter kit with data entry software for producing great results!  Includes a Microwave Leakage Detector to comply with new IEE regulations. Seaward PrimeTest 50 PAT Tester Kit 3 includes: Seaward PrimeTest 50 PAT Tester SimplyPats Manual Software Microwave Leakage Detector The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 500 Failed Labels 500 Cable Wraps  240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results) Delux Carry Case for easy transportation and protection of your PAT Testing Kit!  Comes with customisable foam, so you can snugly fit whatever equipment you would like to take on siteAlso comes supplied with: Test Lead 6 AA Batteries Instruction Manual Soft Carry Case The Primetest 50 offers all the same lightness and portability as its bigger brothers, the PrimeTest 100, PrimeTest 200, PrimeTest 220 and PrimeTest 300 but with a much simplified range of tests. Simply choose the test you require; earthed appliance, double insulated appliance, or mains cord testing. The simple display on the PrimeTest 50 shows whether its a pass or fail, it couldnt be easier. Please be aware that as the PrimeTest 50 has set pass marks, If testing long extension leads or Earthed appliances with long cables the unit will display a fail for earth bond. If this may present a problem please see the PrimeTest 100 If toughness is an issue, dont worry; the rugged outer casing will stand up to anything a normal working environment has to offer. A great choice for those needing a reliable, easy to use, portable safety tester. Features of the Seaward PrimeTest 50: Easy to use Compact and rugged design Simple push button test action Test Class I and II equipment including IT and business equipment Extension and IEC lead tests Power socket polarity LCD display giving clear pass/fail indicationCalibration is NOT included. Seaward PrimeTest 50 Kits http://www.pat-services.co.uk/seaward-primetest-microwave-leakage-detector-1192.htm http://www.pat-services.co.uk/battpat-pat-tester-kit-3-1190.htm The ultimate PAT Testing starter kit with data entry software, for producing great results and microwave leakage detector! BATTPAT PAT Tester Kit 3 includes: BATTPAT PAT Tester SimplyPATS Manual Software Microwave Leakage Detector The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 500 Failed Labels 500 Cable Wraps 240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results) Delux Carry Case for easy transportation and protection of your PAT Testing Kit!  Comes with customisable foam, so you can snugly fit whatever equipment you would like to take on site.Also comes supplied with: 1 x Test Clip 1 x Power Supply (Mains Charger) User Manual Key features of the BATTPAT Pat tester: The BATTPAT is ideal for second hand shops, charities and companies who only have a few items to test.  It tests surge protected extension leads and adapters, where most other testers in this range do not.   Easy to Use Only has 4 buttons; Class I, Class I No Earth, Class II and Cables  Designed with novices and non-electricians in mind  'Long Lead' button tests appliances with long cables  Test Class I where there is no earth, such as desktop fans and shredders  Built in IEC Lead Socket allows you to test extension leads  Tests surge extension leads and adapters with no problems  Battery Powered - Approx 700 tests on a single charge  Rechargeable - Supplied with mains charger  Clear Pass/Fail Display  Neat compact design For a manual, low volume, battery powered tester we really do not have a bad word to say about it!Calibration is NOT included. BATTPAT Kits http://www.pat-services.co.uk/battpat-pat-tester-kit-3-1190.htm http://www.pat-services.co.uk/battpat-pat-tester-kit-2-1188.htm An excellent PAT Testing Starter Kit with data entry software for producing great results! BATTPAT PAT Tester Kit 2 includes: BATTPAT PAT Tester SimplyPATS Manual Software The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 500 Failed Labels 500 Cable Wraps 240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results) Delux Carry Case for easy transportation and protection of your PAT Testing Kit!  Comes with customisable foam, so you can snugly fit whatever equipment you would like to take on site. Also comes supplied with: 1 x Test Clip 1 x Power Supply (Mains Charger) User Manual Key features of the BATTPAT: The BATTPAT is ideal for second hand shops, charities and companies who only have a few items to test.  It tests surge protected extension leads and adapters, where most other testers in this range do not.   Easy to Use Only has 4 buttons; Class I, Class I No Earth, Class II and Cables  Designed with novices and non-electricians in mind  'Long Lead' button tests appliances with long cables  Test Class I where there is no earth, such as desktop fans and shredders  Built in IEC Lead Socket allows you to test extension leads  Tests surge extension leads and adapters with no problems  Battery Powered - Approx 700 tests on a single charge  Rechargeable - Supplied with mains charger  Clear Pass/Fail Display  Neat compact design For a manual, low volume, battery powered tester we really do not have a bad word to say about it!Calibration is NOT included. BATTPAT Kits http://www.pat-services.co.uk/battpat-pat-tester-kit-2-1188.htm http://www.pat-services.co.uk/flir-b250-thermal-imaging-camera-1183.htm FLIR B250 Small, compact and powerful infrared camera! An infrared camera is a powerful predictive maintenance tool, as in many instances equipment failure is preceded by a period of increasing heat. An infrared camera is also an excellent building inspection instrument, it quickly scans and identifies problem areas that can't be seen by the naked eye. It is also used for repair verification and insurance purposes. The FLIR B250 is a professional level infrared camera at a truly affordable price. It is jam-packed with many of the features found in higher-model FLIR infrared cameras. Picture-in-Picture and much more With the exclusive FLIR Picture-in-Picture capability, you combine infrared and visible light detail to easily show hidden trouble. Speed through reporting of trouble spots with the help of FLIR's QuickReport software. QuickReport includes easy image organisation tools and report templates so you can concentrate more on your IR inspection. Building applications for the FLIR B-Series A great feature of the FLIR B250 is the inclusion of a built-in insulation and dewpoint alarm. The FLIR B250 is specially designed for building inspections such as, heating and cooling losses, air infiltration and exfiltration, detecting moisture, HVAC or plumbing problems and much more. Features NEW Focal Plane Array detector with 240 x 180 pixels image resolution  NEW Copy to USB - Copy results to USB for quick data transfer. NEW MeterLink - New technology allowing you to wirelessly connect FLIR infrared cameras to Bluetooth Extech meters (e.g. Extech InspectorPro MO297 Multi-function Moisture Meter and Psychrometer) This data is instantly imprinted onto the thermal image. NEW IR Window Correction - When inspecting high voltage through safety IR windows this software corrects the image and severely improves quality. NEW 3.1 megapixel digital camera with built-in LED lights Outstanding ease-of-use Excellent ergonomics through small size and light weight Tiltable lens unit Excellent infrared image quality Integrated digital camera Visualisation software and tools Possibility to upgrade your camera to grow with your needs Interchangeable lens with 1X-2X continuous zoom Laser pointer Visual camera  Thumbnail gallery allows quick search for stored images 2x digital zoom Picture in picture (scalable) Object temperature range - 20C to +120C - Option available to increase temperature range up to +1200C 70 mK @ +30C (+86F) SD Card slot for image storage (1GB card stores up to 1,000 Radiometric JPEG images) Dewpoint and insulation alarm Dimensions: 106 x 201 x 125 mm Weight: 880g Accessories Transport case SD memory card Rechargeable battery AC adaptor/charger 2-bay battery charger QuickReport software USB and video cables Stylus pen Lens cap Storage case User documentation CD-ROM (21 languages) Getting started guide Power supply Power cord Sun shield Headset Click here to download a datasheet comparison of the FLIR B-Series Call us on 0800 247 1600 to discuss a wide range of lenses, software, and accessories for the B-Series!Other Flir Thermal Imaging Cameras:Flir i5, Flir i7, Flir InfraCam SD, Flir BCam SD, Flir b40, Flir b50, Flir b60, Flir i40, Flir i50, Flir i60, Flir T200, Flir T250, Flir T335, Flir T360, Flir T365, Flir T425, Flir B200, Flir B335, Flir B360, Flir B365, Flir B425 Click here for Thermal Imaging (Imager) Camera information. Building Applications http://www.pat-services.co.uk/flir-b250-thermal-imaging-camera-1183.htm http://www.pat-services.co.uk/fluke-tir1-thermal-imaging-camera-1179.htm The Fluke TiR1 Thermal Imaging camera is the perfect thermal imager for building envelope, restoration and remediation, inspection and roofing applications.Property and Facilities Managers are using the Fluke TiR1 to keep their buildings well maintained and in a healthy state for their clients.  Restoration professionals use thermal imaging to increase business by differentiating themselves from their competitors.  Thermal imaging provides a great way for documenting potential risks in case of future liability claims.Screen for Swine FluMexican Airports have been the most recent purchasers of the Fluke TiR1 Infrared Thermal Imager to screen people for H1N1 influenza A, or swine flu. The portable imager takes remote skin-temperature measurements at airports, hospitals, schools, and any facility where large numbers of people meet. Flukes IR Fusion overlays visible-light and infrared images to make anyone with higher body surface temperature easy to identify.Benefits of Infrared Noncontact Temperature Measurement: Noncontact, so there is less chance of spreading infection or disease Temperature readings are immediate, so large groups of people can be screened quickly Infrared temperature measurement is completely safe and innocuous, so there is no risk to public safety Individuals can be moving, so travel is not delayedIR-Fusion Technology The Fluke TiR1 Thermal Imager comes complete with IR-Fusion technology.  See things both waysinfrared and visual (visible light) images are combined together communicating critical information faster and easiertraditional infrared images are no longer enough. IR-Fusion, a patent-pending technology that simultaneously captures a digital photo in addition to the infrared image and fuses it together taking the mystery out of IR image analysis.Another great feature of the Fluke TiR1 Thermal Imager is the ability to record a voice comment with every image taken.Fluke TiR1 Thermal Imager Camera Features: Includes IR-Fusion Technology both in camera and software (combines visible image with IR image in full screen or picture-in-picture views) for easy identification and reporting of problems Rugged and reliable: Engineered to withstand a 2 m (6.5 ft) drop 9.1 cm (3.6 in) diagonal landscape color VGA (640 x 480) LCD Temperature range and thermal sensitivity optimised for building diagnostics applications Reflected background temperature (reflected temperature compensation) Perfect for any application and budget Excellent thermal sensitivity for seeing even small temperature differences (which could indicate problems) No need to carry pen and paperrecord findings by speaking into the camera. Voice annotations can be recorded with every image you take. Voice comments are saved along with individual images for future reference Operates in 16 languages Adjustable hand strap for left- or right-handed users Everything needed to get started is includedNEW! Training DVD is now included free. See how easy it is to set up your thermal imager, create professional reports with SmartView software and learn thermography theory with step-by-step video instructionsIncluded Accessories: AC power supply/battery charger (including mains adaptors) SD memory card SD card reader (USB) for downloading images into your computer SmartView software Rugged hard carrying case Soft transport bag Hand strap Users manual Thermal Imaging Training DVD - Learn thermography! Warranty registration cardIncludes Calibration CertificateOther Fluke Thermal Imaging Cameras:Fluke Ti9, Fluke TiRx, Fluke TiR, Fluke Ti10, Fluke Ti25Click here for Thermal Imaging (Imager) Camera information. Building Applications http://www.pat-services.co.uk/fluke-tir1-thermal-imaging-camera-1179.htm http://www.pat-services.co.uk/fluke-tirx-thermal-imaging-camera-1177.htm Fluke TiRx Inspector Thermal Imager for buildings This entry-level Thermal Imager shows building heat losses in highest detail The new Fluke TiRx Inspector Thermal Imager shows up building faults and energy waste instantly and in unrivalled detail. The 160 x 120 pixel resolution is three times that of other entry-level thermal imaging cameras, showing images on a widescreen format LCD. Just point the imager and pull the trigger the excellent 0.1 C (NETD) thermal sensitivity at 30 C highlights even small temperature differences. Facility managers, building inspectors and energy assessors can all use the Fluke TiRx Thermal Imaging Cameras to perform rapid building envelope and roofing inspections for restoration and repair. It shows problems like heat loss from HVAC (Heating, Ventilation and Air Conditioning systems), water leakage from pipes and radiators, air leakage from windows, moisture intrusion in insulation and the location of underfloor heating systems. And you can upgrade the TiRx Thermal Imaging Camera to a full-featured Fluke TiR Thermal Imaging (Imager) Camera with Flukes IR-Fusion for advanced analysis and reporting. IR-Fusion shows a full thermal image, or one combined with a visual image to pinpoint potential faults.Fluke TiRx Thermal Imager Camera Features: Rugged and reliable: Engineered to withstand a 2 m drop 9.1 cm (3.6 in) diagonal landscape color VGA (640 x 480) LCD Temperature range and thermal sensitivity optimised for building diagnostics applications Perfect for any application and budget Excellent thermal sensitivity for seeing even small temperature differences (which could indicate problems) Adjustable hand strap for left or right-handed users Everything needed to get started is included. Training DVD is now included free. See how easy it is to set up your thermal imager, create professional reports with SmartView software and learn thermography theory with step-by-step video instructions. Included Accessories: AC power supply/battery charger (including mains adaptors) SD memory card SD card reader (USB) for downloading images into your computer SmartView software Rugged hard carrying case Soft transport bag Hand strap Users manual Thermal Imaging Training DVD - Learn thermography! Warranty registration cardIncludes Calibration Certificate Other Fluke Thermal Imaging Cameras:Fluke Ti9, Fluke TiR, Fluke TiR1, Fluke Ti10, Fluke Ti25Click here for Thermal Imaging (Imager) Camera information. Building Applications http://www.pat-services.co.uk/fluke-tirx-thermal-imaging-camera-1177.htm http://www.pat-services.co.uk/fluke-tir-thermal-imaging-camera-1175.htm The Fluke TiR Thermal Imaging camera is the perfect thermal imager for building envelope, restoration and remediation, inspection and roofing applications.Property and Facilities Managers are using the Fluke TiR to keep their buildings well maintained and in a healthy state for their clients.  Restoration professionals use thermal imaging to increase business by differentiating themselves from their competitors.  Thermal imaging provides a great way for documenting potential risks in case of future liability claims. IR-Fusion Technology The Fluke TiR Thermal Imager comes complete with IR-Fusion technology.  See things both waysinfrared and visual (visible light) images are combined together communicating critical information faster and easiertraditional infrared images are no longer enough. IR-Fusion, a patent-pending technology that simultaneously captures a digital photo in addition to the infrared image and fuses it together taking the mystery out of IR image analysis.Fluke TiR Thermal Imager Camera Features: Includes IR-Fusion Technology both in camera and software (combines visible image with IR image in full screen or picture-in-picture views) for easy identification and reporting of problems Rugged and reliable: Engineered to withstand a 2 m (6.5 ft) drop 9.1 cm (3.6 in) diagonal landscape color VGA (640 x 480) LCD Temperature range and thermal sensitivity optimised for building diagnostics applications Perfect for any application and budget Excellent thermal sensitivity for seeing even small temperature differences (which could indicate problems) Adjustable hand strap for left or right-handed users Everything needed to get started is included. Training DVD is now included free. See how easy it is to set up your thermal imager, create professional reports with SmartView software and learn thermography theory with step-by-step video instructions.  Included Accessories: AC power supply/battery charger (including mains adaptors) SD memory card SD card reader (USB) for downloading images into your computer SmartView software Rugged hard carrying case Soft transport bag Hand strap Users manual Thermal Imaging Training DVD - Learn thermography! Warranty registration cardIncludes Calibration CertificateOther Fluke Thermal Imaging Cameras:Fluke Ti9, Fluke TiRx, Fluke TiR1, Fluke Ti10, Fluke Ti25Click here for Thermal Imaging (Imager) Camera information. Building Applications http://www.pat-services.co.uk/fluke-tir-thermal-imaging-camera-1175.htm http://www.pat-services.co.uk/simplypats-v6-manual-software-1173.htm Now compatible with Windows 7!SimplyPats V6 Manual Entry PAT Testing Software is aimed at users with non-downloadable PAT Testers.  Asset and Test Data is input manually into the software, users can then take advantage of the many features found within SimplyPats to manage and process their PAT Testing results. Simplified Input of Manual Test Data The Manual Entry screen within SimplyPats v6 Software allows for easy entry of Portable Appliance Asset information and Test Data, this includes Appliance ID, Date and Time of Test, Site, Location, Retest Period, Appliance Description and Test Data, which includes Result, Test Limit and Status I.E. Pass, Fail or Skip. Fed up of retyping the same asset every time? SimplyPats asks if you would like to carry over the current Asset information to the next Asset. Choose a set of User defined Test Limits from the pre-defined drop down boxes and the information will automatically populate the Test Limit fields, these are managed from the Maintain Test Limits screen and can be customised to show your own descriptions, i.e. CLASS I Test, CLASS II Test, CLASS I HAND HELD etc. After the Test Limits have been entered you only need to enter the Test Results and press the Auto button to calculate the Status of the test, i.e. Pass, Fail or Skip. Professional Looking Reports A number of standard Reports are available, including; Appliance Register, Pass Report, Fail Report and Certificate of Electrical Testing. Export Reports i.e. for Email As well as printing Reports, SimplyPats Manual v6 Software can save the results in Adobe PDF, MS Word and MS Excel formats.  This is an excellent feature for customers who require the results in email format. Retest Management SimplyPats offers a number of ways for you to manage asset retest dates. Simply use the Retest Calendar feature, which gives a graphical overview of Customers due for retest.  Microsoft Outlook users have the option to send retest information as an appointment to Outlook. Electronic Record of Test Data Storing Test Data electronically allows you to duplicate the data for archive purposes or re-print/export Reports at any time. SimplyPats v6 Supports all Manual PAT Testers e.g.  Seaward Primetest 50  Seaward Primetest 100  Seaward Primetest 200  Metrel AutoPAT  Martindale EasyPAT 1600  Martindale EasyPAT 2100  Martindale HANDYPAT 600  Kewtech KT71  Kewtech KT73 Plus  Fluke 6200  Robin 3000  Robin 3500  Megger PAT32  Transmille 5080  BATTPAT  SimplePAT Other SimplyPats v6 features include:  Export Test Data in popular file formats, such as Adobe PDF, MS Word and MS Excel formats  Advanced Sort and Group functions  Bulk Replace Asset Information  Spell Check  Invoicing  Add Customer details as well as Invoice Details  Maintain PAT Tester  Email Data  Import Appliance Descriptions from Previous Data File  Add your Details as well as Logo and Digital Signature for the Certificate of Electrical  Testing  Backup Data  Set Default Data Path, I.E. Save Data on a shared Server  Maintain Test, Repair and Extra Charges if using Charge/Repair Codes for Invoicing PAT Testing Software http://www.pat-services.co.uk/simplypats-v6-manual-software-1173.htm http://www.pat-services.co.uk/seaward-supernova-plus-kit-7-1171.htm An excellent professional PAT testing starter kit with PATGuard Lite Software for data management! Seaward SuperNova Plus Kit 7 - Lite Starter PAT Tester Kit includes:  Seaward SuperNova Plus PAT Tester Seaward PATGuard Lite V2 Software USB to Serial Adaptor (to connect your Seaward Europa Plus to the PC) 1000 Passed Labels 500 Failed Labels 500 Cable Wraps 230v Plug (13amp) to IEC Socket IEC Socket to 110v Plug (16amp)  Also comes supplied with: Earth Bond Lead Flash Probe 240V/110V Adaptor Cable RS232 Download Lead User Manual Serial Adaptor There is no denying the Seaward SuperNova is the most comprehensive, useful PAT Tester on the market, bar none! If you need to do a test rest assured the seaward SuperNova Plus PAT Tester can do it, including flash testing and full dual voltage capability. This sophisticated PAT Tester is packed full of fantastically useful features, such as 5000 test record memory, sites, locations, user, test status and date. The Seaward SuperNova has connections for a Barcode Scanner (optional) and Seaward Test n Tag Printer (optional), as well as a parallel printer port. For ease of use, there is a large LCD graphics display, with legible, walk through instructions for each test facility. Downloading vital information is fantastically fast and asset management is supported with a software package such as Seaward PATGuard Lite V2 (included). All this in a rugged enclose too. The SuperNova really does have it all! Seaward SuperNova Plus features:  Multi voltage in/multi voltage out  Accurate Earthbond and Leakage Measurement even when multiple earth paths exist  Full alpha-numeric QWERTY softkey pad  Full graphics display  Non-volatile flash memory  Real time clock  Connects to PC, Barcode reader and printer  "Learn Mode" adjusts the user-interface to differing levels of expertise  Auto test code generation  Boots up in less than 2 seconds  Superfast download - Up to 10 times quicker than existing testers  Parallel printer portCalibration is NOT included. Seaward Supernova Plus http://www.pat-services.co.uk/seaward-supernova-plus-kit-7-1171.htm http://www.pat-services.co.uk/seaward-europa-plus-kit-6-1169.htm An excellent professional PAT testing kit with PATGuard Elite Software for data management and a Barcode Scanner to speed up your testing!  We've also included a Test 'n' Tag printer to save even more time Seaward Europa Plus Kit 6 - Ultimate Printer PAT Tester Kit includes:  Seaward Europa Plus PAT Tester  Seaward Test 'n' Tag Printer (includes Black on Yellow Cartridge, Power Lead)  Seaward Test 'n' Tag Carry Case Seaward PATGuard Elite V2 Software USB to Serial Adaptor (to connect your Seaward Europa Plus to the PC)  Barcode Scanner 230v Plug (13amp) to IEC Socket IEC Socket to 110v Plug (16amp)Also comes supplied with:  Protective Rubber Cover  Carry Case  RS232 Download Lead  Earth Bond Lead  User Manual  240v Plug to 110v Adapter for testing 110v appliances One of our best selling PAT testers! The Seaward Europa Plus is a light weight version of the Seaward SuperNova.  If you need a PAT tester for a school, college, university or your PAT testing business then the Seaward Europa Plus is the one for you.  It is the preferred PAT tester of PAT testing businesses and companies that have to test large numbers of appliances. It will test IT, non IT and 110v equipment.  If you require a 110v run test take a look at the Seaward SuperNova. The PAT tester is fully computerised with a built in QWERTY keyboard for fast entry of test results and a built in IEC socket for testing IEC and extension leads.  With the Seaward Europa Plus there is no need for a separate extension lead adapter like some testers. Seaward Europa Plus Overview: When carrying out testing the Europa Plus PAT tester first lets you enter the appliance number which can be automatically incremented or decremented. Then enter the appliances location or room it is in, along with the retest frequency, which is selectable from a drop down menu. Once the above information has been entered into the Seaward Europa Plus you are presented with a menu of fully configurable pre-defined tests which are factory set. There are tests for Class 1 and Class 2 equipment of different types; such as hand held and portable equipment, movable and stationary and also IEC and extension lead tests. Once the test has been selected the Seaward Europa Plus automatically carries out the test and displays the test results on a large clear backlit display. At the end of the test you can enter the appliance description, serial/model number and any notes. Use the software to enter short codes for things such as descriptions; you dont have to type extension lead all day long for the description when you could just type 9E and the Seaward Europa Plus will automatically change it. The test results from the Seaward Europa Plus PAT tester can be downloaded to various software packages such as Seaward PATGuard Elite V2 (included)!  The memory on the Seaward Europa Plus will hold 5000 test records, so there is ample space for several weeks worth of testing. Other facilities include the ability to add a Barcode Scanner (included) to the tester so that instead of typing a 20 digit serial number you can scan a model/serial number barcode and the information will be transferred directly to the tester. You can even attach a Test n Tag Printer (included) which will produce a label to attach to the appliance. Calibration is NOT included. Seaward Europa Plus Kits http://www.pat-services.co.uk/seaward-europa-plus-kit-6-1169.htm http://www.pat-services.co.uk/flir-t250-thermal-imaging-camera-1165.htm FLIR T250 Small, compact and powerful infrared camera! An infrared camera is a powerful predictive maintenance tool, as in many instances equipment failure is preceded by a period of increasing heat. An infrared camera is also an excellent building inspection instrument, it quickly scans and identifies problem areas that can't be seen by the naked eye. It is also used for repair verification and insurance purposes. The FLIR T250 is a professional level infrared camera at a truly affordable price. It is jam-packed with many of the features found in higher-model FLIR infrared cameras. Picture-in-Picture and much more With the exclusive FLIR Picture-in-Picture capability, you combine infrared and visible light detail to easily show hidden trouble. Speed through reporting of trouble spots with the help of FLIR's QuickReport software. QuickReport includes easy image organisation tools and report templates so you can concentrate more on your IR inspection. Industrial applications for the FLIR T-Series Examples of industrial applications where the FLIR T-Series cameras are an invaluable tool for professional thermographers in spotting anomalies before a break down is a fact, are: production process supervision, measurement of heat development electrical and mechanical devices, detect blocked pipe work and insulation defects, enhance work safety and much more. Features NEW Focal Plane Array detector with 240 x 180 pixels image resolution  NEW Copy to USB - Copy results to USB for quick data transfer. NEW MeterLink - New technology allowing you to wirelessly connect FLIR infrared cameras to Bluetooth Extech meters (e.g. Extech EX8451000 ACA Clamp Meter) This data is instantly imprinted onto the thermal image. NEW IR Window Correction - When inspecting high voltage through safety IR windows this software corrects the image and severely improves quality. NEW 3.1 megapixel digital camera with built-in LED lights Outstanding ease-of-use Excellent ergonomics through small size and light weight Tiltable lens unit Excellent infrared image quality Integrated digital camera Visualisation software and tools Voice Comment recording Onscreen sketching Image markers on IR/Visual Text from Touch functions Possibility to upgrade your camera to grow with your needs Interchangeable lens with 1X-2X continuous zoom  Laser pointer Visual camera Thumbnail gallery allows quick search for stored images 2x digital zoom Picture in picture (scalable) Object temperature range - 20C to +120C- 0C to 350C- Option available to increase temperature range up to +1200C Wide temperature range: -4F to 662F (-20C to 350C) with 2% accuracy High Thermal Sensitivity (N.E.T.D) - 0.08C @ 25C 80 mK @ +30C (+86F) SD Card slot for image storage (1GB card stores up to 1,000 Radiometric JPEG images) Radiometric IR video streaming Panorama support Dimensions: 106 x 201 x 125 mm Weight: 880g Accessories Transport case SD memory card Rechargeable battery AC adaptor/charger 2-bay battery charger QuickReport software USB and video cables Stylus pen Lens cap Storage case User documentation CD-ROM (21 languages) Getting started guide Power supply Power cord Sun shield Headset Click here to download a datasheet comparison of the FLIR T-Series Call us on 0800 247 1600 to discuss a wide range of lenses, software, and accessories for the T-Series! Other Flir Thermal Imaging Cameras:Flir i5, Flir i7, Flir InfraCam SD, Flir BCam SD, Flir b40, Flir b50, Flir b60, Flir i40, Flir i50, Flir i60, Flir T200, Flir T335, Flir T360, Flir T365, Flir T425, Flir B200, Flir B250, Flir B335, Flir B360, Flir B365, Flir B425 Click here for Thermal Imaging (Imager) Camera information. Electrical Applications http://www.pat-services.co.uk/flir-t250-thermal-imaging-camera-1165.htm http://www.pat-services.co.uk/socket-professional-polarity-tester-1161.htm Bright LED's out-perform fragile old style neons Logical "Green for Go" LED indication New circuitry means no tripping RCD's Detects good plus 13 wiring fault conditions  Continuous audible tone gives positive good wiring indication Strong warbling tone gives clear warning of faulty wiring Advanced electronics include a quad comparator to give clear indication even on noisy circuits Detects good plus 13 wiring fault conditions The first socket tester to show where the actual fault is Live , Earth or Neutral  New patented "Fault Locate" electronics gives clearest indication yet of good plus 17 wiring fault conditions - more than any other known socket tester Continuous or strong warbling tone gives positive quick indication of good or faulty wiring Built in self check at start of testing gives confidence in correct operation at all times The first socket tester to also test true earth loop impedance Easy Colour LED read out system gives earth loop result as Good/Check or Urgent Check Compact design encourages more frequent socket safety checks Full earth loop test Audible tone indication gives clear indication of good socket or problem socket Test for total supply system polarity safety Operational check of 30mA RCDs Socket Testers http://www.pat-services.co.uk/socket-professional-polarity-tester-1161.htm http://www.pat-services.co.uk/socket-see-sok-34-easy-1159.htm Bright LED's out-perform fragile old style neons Logical "Green for Go" LED indication New circuitry means no tripping RCD's Detects good plus 13 wiring fault conditions  Continuous audible tone gives positive good wiring indication Strong warbling tone gives clear warning of faulty wiring Advanced electronics include a quad comparator to give clear indication even on noisy circuits Detects good plus 13 wiring fault conditions The first socket tester to show where the actual fault is Live , Earth or Neutral  New patented "Fault Locate" electronics gives clearest indication yet of good plus 17 wiring fault conditions - more than any other known socket tester Continuous or strong warbling tone gives positive quick indication of good or faulty wiring Built in self check at start of testing gives confidence in correct operation at all times The first socket tester to also test true earth loop impedance Easy Colour LED read out system gives earth loop result as Good/Check or Urgent Check Compact design encourages more frequent socket safety checks Full earth loop test Audible tone indication gives clear indication of good socket or problem socket Socket Testers http://www.pat-services.co.uk/socket-see-sok-34-easy-1159.htm http://www.pat-services.co.uk/martindale-hpat600-kit-1-1157.htm An excellent PAT Testing Starter Kit!   Martindale HPAT600 PAT Tester Kit 1 includes: Martindale HPAT600 PAT Tester The Essential Guide to PAT Testing Training DVD (with online examination) 500 Passed Labels 500 Failed Labels 500 Cable Wraps 240v Plug to 10amp IEC Lead for testing 240v Extension Cables 110v Socket to 10amp IEC Lead for testing 110v Extension Cables PAT Testing Log book (to record your test results) Delux Carry Case for easy transportation and protection of your PAT Testing Kit!  Comes with customisable foam, so you can snugly fit whatever equipment you would like to take on site Also comes supplied with: Carry case Earth Bond Lead Mains Lead and Car Charger 6 Rechargeable Batteries Crocodile Clip Manual Keyring Martindale HPAT600 Handy PAT information The HPAT600 Handy PAT is a fantastic little tester for all of the low volume users who record tests manually. This battery powered HPAT600 comes complete with mains charger and also a car charger to enable you to charge on the move should you need it. You will be able to carry out a full weeks testing on a full charge as the Handypat tester will test approx 700 tests on a full set of batteries. This little semi-automatic HPAT600 from Martindale has great features such as 250 volt insulation tests - No more worries about testing surge protected extension leads and adapters as they will fly through the insulation test with the handypat. Safe for testing IT equipment it carries out a 200mA earth bond test it also has a built in extension and IEC lead socket. You can also set your own pass and fail limits a feature more common with larger more expensive testers. The bright HPAT600 display is backlit with the press of a button. Another feature of the HPAT600 is the ability to carry out testing automatically or manually again a feature of more professional testers but there's even more! In manual mode for the complete novice you will see a diagram presented on how to carry out the test. Need to store results? It also comes with a 200 test result memory so that you can look back on your days testing and write the results down afterwards. The screen of the HPAT600 displays all of the readings as well as a pass or fail indication making it easy to use. Just to recap the main features of the HPAT600:  Easy-to-use  Safe for IT equipment  Compatible with Surge Adapters and Extensions  Backlit display  200 test memory  Battery powered  Rechargeable  Automatic or manual  Leakage test  700 tests on a set of batteries  One year warrantyCalibration certificate is NOT included. Martindale HPAT600 Kits http://www.pat-services.co.uk/martindale-hpat600-kit-1-1157.htm http://www.pat-services.co.uk/fluke-mc50-50-pack-meter-1155.htm  50 pack  Pre-moistened wipe removes dirt, oil and grease  One wipe easily cleans one meter  Safe on rubber, plastic and for environment (non-toxic) PAT Tester Accessories http://www.pat-services.co.uk/fluke-mc50-50-pack-meter-1155.htm http://www.pat-services.co.uk/fluke-mc6-6-pack-meter-1153.htm  6 pack  Pre-moistened wipe removes dirt, oil and grease  One wipe easily cleans one meter  Safe on rubber, plastic and for environment (non-toxic) PAT Tester Accessories http://www.pat-services.co.uk/fluke-mc6-6-pack-meter-1153.htm http://www.pat-services.co.uk/fluke-h3-clamp-meter-holster-1151.htm  Fabric holster absorbs shocks and protects meter from rough handling.  Built-in pocket for lead storage  Convenient belt-loop with snap  One year warranty Current Clamps Meters http://www.pat-services.co.uk/fluke-h3-clamp-meter-holster-1151.htm http://www.pat-services.co.uk/fluke-c1600-hard-carry-case-1149.htm The Fluke C1600 is a rugged, molded plastic case designed to carry Fluke handheld digital multimeters and process calibrators and most accessories used for these meters. Fluke C1600 Gear Box features:  Deep interior large enough to hold and protect your gear and leaves room for accessories and other essentials.  Rubber gasket in lid seals out dust and keeps contents dry.  Lift out tray keeps everything organized.  Snap open compartment on top of lid for easy access to small parts such as fuses, batteries, probes and leads.  Includes five hook and loop straps to wrap cords and test leads when not in use.  Can be locked.  Large carry handle for comfortable hauling. PAT Tester Accessories http://www.pat-services.co.uk/fluke-c1600-hard-carry-case-1149.htm http://www.pat-services.co.uk/fluke-c33-soft-carrying-case-1147.htm  Zippered carrying case with durable vinyl exterior  Has belt loop and an inner pocket to store test leads or small accessories  Companion case to:    - Fluke T100 series Voltage and Continuity Testers    - Fluke 330 series Clamp Meters    - Fluke T5 Electrical Tester  One year warranty Dimensions (H x W x D) mm 280 x 115 x 55 Compatibility T100 Series 333/334/335/336/337/902 Accessories http://www.pat-services.co.uk/fluke-c33-soft-carrying-case-1147.htm http://www.pat-services.co.uk/fluke-c25-soft-case-for-1145.htm  Zippered carrying case with padding and inside pocket.  One year warranty Dimensions (H x W x D) mm 218 x 128 x 64 Compatibility 114/115/116/117 175/177/179 1503/1507/1577/1587 9040/9062 922 971 51/52/53/54 II Digital Multimeters http://www.pat-services.co.uk/fluke-c25-soft-case-for-1145.htm http://www.pat-services.co.uk/fluke-1630-earth-ground-clamp-1143.htm The Fluke 1630 Earth Ground Clamp Meter is an exceptional tool.  With a compact and rugged design the Fluke 1630 is easy to use in compact spaces and harsh environments, while the display-HOLD keeps the measurements on screen.  The continuity testing with an audible alarm function ensures convenient use. This novel technique means that earth ground loop testing and continuity testing can be completed without breaking the circuit. It simplifies ground loop testing (also known as stakeless earth ground testing) and enables non-intrusive leakage current measurement.  Stakeless testing eliminates the need to disconnect parallel ground rods and find suitable locations for placing auxiliary ground stakes.  This saves time and enables users such as industrial and utility electricians, and field service electricians and contractors, to perform earth ground loop tests in locations where it is not possible to use other techniques, including inside buildings or on power pylons.  With the stakeless testing method, earth ground stakes are no longer necessary.  Simply place the earth ground clamp around the earth ground rod or connecting cable.  One half of the clamp induces a voltage, while the other half measures the current.  Group loop resistance is automatically determined at the grounding location. Fluke 1630 features:  Ground loop resistance testing without any disconnection or additional earth stakes  Earth ground leakage current measurement for system troubleshooting  True RMS AC current measurement range up to 30 A  Rapid evaluation of continuity without disconnection and audible HI/LO alarm  Display-HOLD function to freeze measurements  Recording function for automatic storage of measured values, which can be recalled later on the LCD display  Automatic self calibration ensures correct measurement every time  Two year warranty The Fluke 1630 is ideally suited for the following applications:  Ground loop checks on any earthing system  Continuity tests on earth bonding circuits and connections  Inspection of lighting protection systems  Leakage current measurement for troubleshooting on earth ground systems Included accessories:  Rugged carrying case with belt  Resistance test loop  9 V battery  Operating instructions Earth Testers http://www.pat-services.co.uk/fluke-1630-earth-ground-clamp-1143.htm http://www.pat-services.co.uk/fluke-1625-earth-ground-tester-1141.htm The Fluke 1625 is a simple to use earth ground tester which performs all four types of earth ground measurement.   While the Fluke 1623 is a great product, the Fluke 1625 offers extra versatility for more demanding applications.  It not only measures ground resistance by the conventional fall of potential test but allows you to save time using selective and stakeless methods. Selective testing allows extra safety as it does not require the electrode under test to be disconnected. The stakeless method allows you to clamp two current transformers (probes) to the ground conductor for fast ground connection testing.  This method requires no ground stakes or the disconnection of ground rods. Earth ground resistance and soil resistivity should be measured when: Designing earth ground systems Installing new ground system and electrical equipment Periodically testing ground and lighting protection systems Installing large electrical equipment such as transformers, switchgears and machines, etc Features: 3- and 4-Pole Fall of Potential (standard earth ground testing using two ground stakes) 3- and 4-Pole earth ground measurement 4-Pole soil resistivity testing 2-Pole resistance measurement AC 2- and 4-pole resistance measurement DC Selective testing without disconnecting ground rods, a technician can measure ground resistance using a combination of stakes and a clamp (1 clamp) Stakeless testing innovative solution using only clamps, instead of ground stakes, to measure earth ground loop resistance (2 clamps) Earth impedance measurement at 55 Hz Automatic frequency control (AFC) (94-128 Hz) Measuring voltage switchable 20/48V Programmable limits, settings Continuity with buzzer Dust/water resistance: IP56 Safety rating: CAT II 300 V Two year warranty Included in the Fluke 1625 Earth Ground Tester GEO Kit: - Fluke 1625 Earth Ground Tester GEO - Rugged carrying case* - Protective Holster - 2 test leads - 2 alligator clips - Carrying strap - 3 earth reels with wire (2-25m, 1-50m)* - 4 earth ground stakes* - 2 clamps (selective/stakeless)* - Batteries - Users manual * Additional to the standard Fluke 1625 Earth Ground Tester GEO Earth Testers http://www.pat-services.co.uk/fluke-1625-earth-ground-tester-1141.htm http://www.pat-services.co.uk/fluke-1625-earth-ground-tester-1138.htm The Fluke 1625 is a simple to use earth ground tester which performs all four types of earth ground measurement.   While the Fluke 1623 is a great product, the Fluke 1625 offers extra versatility for more demanding applications.  It not only measures ground resistance by the conventional fall of potential test but allows you to save time using selective and stakeless methods. Selective testing allows extra safety as it does not require the electrode under test to be disconnected. The stakeless method allows you to clamp two current transformers (probes) to the ground conductor for fast ground connection testing.  This method requires no ground stakes or the disconnection of ground rods. Earth ground resistance and soil resistivity should be measured when: Designing earth ground systems Installing new ground system and electrical equipment Periodically testing ground and lighting protection systems Installing large electrical equipment such as transformers, switchgears and machines, etc Features: 3- and 4-Pole Fall of Potential (standard earth ground testing using two ground stakes) 3- and 4-Pole earth ground measurement 4-Pole soil resistivity testing 2-Pole resistance measurement AC 2- and 4-pole resistance measurement DC Selective testing without disconnecting ground rods, a technician can measure ground resistance using a combination of stakes and a clamp (1 clamp) Stakeless testing innovative solution using only clamps, instead of ground stakes, to measure earth ground loop resistance (2 clamps) Earth impedance measurement at 55 Hz Automatic frequency control (AFC) (94-128 Hz) Measuring voltage switchable 20/48V Programmable limits, settings Continuity with buzzer Dust/water resistance: IP56 Safety rating: CAT II 300 V Two year warranty Fluke 1625 included accessories: - Protective holster - 2 test leads - 2 alligator clips - Carrying strap - Batteries - Users manual Earth Testers http://www.pat-services.co.uk/fluke-1625-earth-ground-tester-1138.htm http://www.pat-services.co.uk/socket-professional-proving-1136.htm A professional, compact, proving unit which is the first proving unit to generate AC waveform for a true test.  Test two pole volt testers including multimeters and test lamps  The first proving unit to generate AC waveform for a true test  Compact design encourages routine safety checks  Automatic test function to conserve batteries  Step voltage LEDs indicate voltage being generated 50-100-230-400-690V  Low battery indication gives ample warning to replace batteries  Comes with 6 AA batteries Checkboxes & Proving Units http://www.pat-services.co.uk/socket-professional-proving-1136.htm http://www.pat-services.co.uk/fluke-1623-earth-ground-tester-1134.htm The Fluke 1623 is a simple to use earth ground tester which performs all four types of earth ground measurement.   It not only measures ground resistance by the conventional fall of potential test but allows you to save time using selective and stakeless methods. Selective testing allows extra safety as it does not require the electrode under test to be disconnected. The stakeless method allows you to clamp two current transformers (probes) to the ground conductor for fast ground connection testing.  This method requires no ground stakes or the disconnection of ground rods. Earth ground resistance and soil resistivity should be measured when:  Designing earth ground systems  Installing new ground system and electrical equipment  Periodically testing ground and lighting protection systems  Installing large electrical equipment such as transformers, switchgears and machines, etc Features:  One-button measurement concept  3- and 4-Pole Fall of Potential (standard earth ground testing using two ground stakes)  3- and 4-Pole earth ground measurement  4-Pole soil resistivity testing  2-Pole resistance measurement AC  Selective testing without disconnecting ground rods, a technician can measure ground resistance using a combination of stakes and a clamp (1 clamp)  Stakeless testing innovative solution using only clamps, instead of ground stakes, to measure earth ground loop resistance (2 clamps)  Dust/water resistance: IP56  Safety rating: CAT II 300 V  Two year warranty Included in the Fluke 1623 Earth Ground Tester GEO Kit: - Fluke 1623 Earth Ground Tester GEO - Rugged carrying case* - Protective Holster - 2 test leads - 2 alligator clips - 1 shorting jumper - 3 earth reels with wire (2-25m, 1-50m)* - 4 earth ground stakes* - 2 clamps (selective/stakeless)* - Batteries - Users manual * Additional to the standard Fluke 1623 Earth Ground Tester GEO Earth Testers http://www.pat-services.co.uk/fluke-1623-earth-ground-tester-1134.htm http://www.pat-services.co.uk/fluke-1623-earth-ground-tester-1132.htm The Fluke 1623 is a simple to use earth ground tester which performs all four types of earth ground measurement.   It not only measures ground resistance by the conventional fall of potential test but allows you to save time using selective and stakeless methods. Selective testing allows extra safety as it does not require the electrode under test to be disconnected. The stakeless method allows you to clamp two current transformers (probes) to the ground conductor for fast ground connection testing.  This method requires no ground stakes or the disconnection of ground rods. Earth ground resistance and soil resistivity should be measured when:  Designing earth ground systems  Installing new ground system and electrical equipment  Periodically testing ground and lighting protection systems  Installing large electrical equipment such as transformers, switchgears and machines, etc Features:  One-button measurement concept  3- and 4-Pole Fall of Potential (standard earth ground testing using two ground stakes)  3- and 4-Pole earth ground measurement  4-Pole soil resistivity testing  2-Pole resistance measurement AC  Selective testing without disconnecting ground rods, a technician can measure ground resistance using a combination of stakes and a clamp (1 clamp)  Stakeless testing innovative solution using only clamps, instead of ground stakes, to measure earth ground loop resistance (2 clamps)  Measuring frequency 128Hz  Dust/water resistance: IP56  Safety rating: CAT II 300 V  Two year warranty Fluke 1623 included accessories: - Protective holster - 2 test leads - 2 alligator clips - 1 shorting jumper - Batteries - Users manual Earth Testers http://www.pat-services.co.uk/fluke-1623-earth-ground-tester-1132.htm http://www.pat-services.co.uk/fluke-1621-earth-ground-tester-1130.htm The Fluke 1621 is a straightforward and easy to use ground tester.  It makes a great field tester in most environments due to its convenient size, rugged holster and large, clear LCD display.  The Fluke 1621 features basic ground testing methods including 3-pole Fall-of-Potential as well as 2-pole ground resistance.   This is a must have tool for electrical contractors, utility test engineers and earth ground specialists. Features include:  3-pole Fall-of-Potential earth testing for basic measurements  2-pole resistance measurements for added versatility  Easily capture values with single-button operation  Ensure accurate measurements with automatic noise voltage detection  Hazardous voltage warning offers increased user protection  Large backlit display for working in all environments  Portable size for ease of use  Instant alert for measurements outside of your set limit, when you use the adjustable limit setting  Safety rating CAT II 600 V  Battery type: 1 x 9 V alkaline (LR61)  Two year warranty Included accessories: - Two measuring leads with alligator clips (2m) - Protective holster - Users manual - CD-ROM Earth Testers http://www.pat-services.co.uk/fluke-1621-earth-ground-tester-1130.htm http://www.pat-services.co.uk/fluke-1503-insulation-tester-1128.htm The Fluke 1503 is a low cost solution to general insulation testing.  It is rugged, reliable and easy-to-use.  The multiple test voltages make it ideal for troubleshooting, commissioning and preventive maintenance applications. Features include:  User selectable voltages for many applications  Special remote control probe for easy and safe measurements  Auto-discharge of capacitive voltage for added user protection  Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection  Auto power off to save batteries  Large display with backlight for working in all environments  Continuity function (200mA)  Battery life: Over 1000 Insulation Tests  One year warranty Fluke 1503 included accessories: - TP165x Remote Test Probe - TL224 SureGrip Silicone Test Lead Set - TP74 Lantern Tip Test Probe Set - Alligator Clips Insulation / Continuity http://www.pat-services.co.uk/fluke-1503-insulation-tester-1128.htm http://www.pat-services.co.uk/fluke-922-airflow-meter-kit-1126.htm The Fluke 922 is a perfect tool for technicians who want a simple solution to diagnosing ventilation problems.  Differential pressure measurements only tell part of the story.  Why use expensive and difficult to use specialist tools when the Fluke 922 combines pressure, air flow and velocity into one single rugged tool? Compatible with most Pilot tubes, the Fluke 922 allows technicians to conveniently enter their duct shape and dimensions for maximum measurement accuracy. Use the Fluke 922 to: - ensure airflow balance - measure pressure drops across filters and coils - ensure pressure drops across key HVAC equipment to drive peak performance and extended life - match ventilation and occupant loads - monitor indoor vs. outdoor pressure relationships and manage the building envelope - promote indoor comfort and quality - perform duct traversals for accurate airflow readings Provides differential and static pressure, air velocity and flow readings Convenient coloured hoses help diagnose pressure readings Bright backlit display for clear viewing Min/Max/Average HOLD function which keeps readings on the screen Auto power off Storage of up to 99 readings 375 hour battery life (Four AA batteries, 80 hours with backlight) Two year warranty Included in the kit: - Fluke 922 Airflow Meter - 30.48cm Pilot tube* - ToolPak* - Two rubber hoses - Wrist strap - 4 AA 1.5v alkaline batteries - Users manual - Hard carrying case* * Extras to the standard Fluke 922 Airflow Meter Environmental Test Equipment http://www.pat-services.co.uk/fluke-922-airflow-meter-kit-1126.htm http://www.pat-services.co.uk/fluke-922-airflow-meter-1124.htm The Fluke 922 is a perfect tool for technicians who want a simple solution to diagnosing ventilation problems.  Differential pressure measurements only tell part of the story.  Why use expensive and difficult to use specialist tools when the Fluke 922 combines pressure, air flow and velocity into one single rugged tool? Compatible with most Pilot tubes, the Fluke 922 allows technicians to conveniently enter their duct shape and dimensions for maximum measurement accuracy. Use the Fluke 922 to: - ensure airflow balance - measure pressure drops across filters and coils - ensure pressure drops across key HVAC equipment to drive peak performance and extended life - match ventilation and occupant loads - monitor indoor vs. outdoor pressure relationships and manage the building envelope - promote indoor comfort and quality - perform duct traversals for accurate airflow readings Provides differential and static pressure, air velocity and flow readings Convenient coloured hoses help diagnose pressure readings Bright backlit display for clear viewing Min/Max/Average HOLD function which keeps readings on the screen Auto power off Storage of up to 99 readings 375 hour battery life (Four AA batteries, 80 hours with backlight) Two year warranty Accessories included: - Two rubber hoses - Wrist strap - 4 AA 1.5v alkaline batteries - Users manual - Soft carry case Environmental Test Equipment http://www.pat-services.co.uk/fluke-922-airflow-meter-1124.htm http://www.pat-services.co.uk/fluke-971-temperature-humidity-meter-1122.htm Take fast and accurate humidity and temperature readings in the air.  To maintain optimal comfort levels it is important that humidity and temperature are correct in order to ensure good indoor air quality.  The Fluke 971 in a must-have tool for utility technicians, heating, venting and air conditioning (HVAC)-service contractors and indoor air quality (IAQ) specialists.  Lightweight, rugged and ergonomically designed, the Fluke 971 is perfect for monitoring problem areas. Features of the Fluke 971 Temperature Humidity Meter:  Save time by measuring humidity and temperature together  Measures dew point and wet bulb  Store up to 99 records  Min/Max/Average  Data HOLD for keeping data on the screen  Ergonomic design with a protective holster and belt clip for extra security when moving around  Dual reading backlit display  Twist-open protective cap  Low battery indicator  200 hours battery life (4 AAA alkaline)  One year warranty Thermometers http://www.pat-services.co.uk/fluke-971-temperature-humidity-meter-1122.htm http://www.pat-services.co.uk/fluke-902-clamp-meter-1120.htm The Fluke 902 is a tool to meet most heating, ventilation and air conditioning (HVAC) technicians demands.  It is small and lightweight so it can fit in tight places, combined with a HOLD function which keeps the measurements on the display.  With True RMS technology and a CAT III 600 V rating, the Fluke 902 helps technicians do their jobs safely and accurately. Features: Designed for HVAC applications with capacitance, DC Current (A), and temperature measurements AC Current DC Current AC Voltage DC Voltage Resistance Measurement True-RMS Display backlight for dark conditions Small design to allow entry into tight places Display HOLD to keep the measurements on the display Meter controls are positioned so current measurements can be done with one hand Large, backlit display Min/Max Current AC/DC (DC A: 0-200 A direct measurement) Max Conductor Diameter - 30mm Max Current Reading 600 amps Alkaline battery (150 hours) Low battery indication Auto shut-off saves the battery power for when you need it Three year warranty Included Accessories: - C33 soft case - TL75 test leads - 80BK Integrated DMM temperature probe - 2 AA alkaline batteries - Instruction card - Safety information sheet Current Clamps Meters http://www.pat-services.co.uk/fluke-902-clamp-meter-1120.htm http://www.pat-services.co.uk/fluke-568-infrared-thermometer-1118.htm The Fluke 568 Infrared Thermometer is the ideal tool for quick and accurate non-contact temperature measurements.  It is a hand-held tool great for measuring surface temperature.  Fantastic for safe temperature measurement of rotating, hard to reach, electricity, live or dangerously hot targets like electrical motors or rotating parts such as conveyor belts, as well as heating and ventilation systems. Why use several tools for the job when the Fluke 568 combines temperature measurement functions that HVAC/R, industrial and electrical professionals need? A single point laser sighting helps you mark the measurement target, from either close up or far away.  Within seconds you will have your temperature read-out on screen with reliable accuracy. You can use the Fluke 568s bead probe, or plug in any industry standard K mini connector thermocouple probe to take super-heat or internal temperatures. Features of the Fluke 568 Infrared Thermometer:   User selectable C or F   Laser sighting for accuracy (<7.0 meters)   Optical Resolution: 50:1   Backlit LCD display   MIN/MAX/Average and DIF measurements   Adjustable emissivity for higher IR accuracy   Includes thermocouple: Bead probe   Compatibility with other K-type thermocouples   Hi/Low alarm when measurements exceed pre-set limits   Data Logging with date/time stamp: 99 points   Wide temperature range from -40 to 800C   12 hour battery life (2 AA batteries)   Multi-language menu display   Two years warranty Included Accessories: - FlukeView Forms software - USB cable - K-Type thermocouple bead probe - Hard carrying case - 2 AA batteries - Quick start guide - User manual Infrared Digital Thermometers http://www.pat-services.co.uk/fluke-568-infrared-thermometer-1118.htm http://www.pat-services.co.uk/fluke-566-infrared-thermometer-1116.htm The Fluke 566 Infrared Thermometer is the ideal tool for quick and accurate non-contact temperature measurements.  It is a hand-held tool great for measuring surface temperature.  Fantastic for safe temperature measurement of rotating, hard to reach, electricity, live or dangerously hot targets like electrical motors or rotating parts such as conveyor belts, as well as heating and ventilation systems. Why use several tools for the job when the Fluke 566 combines temperature measurement functions that HVAC/R, industrial and electrical professionals need? A single point laser sighting helps you mark the measurement target, from either close up or far away.  Within seconds you will have your temperature read-out on screen with reliable accuracy. You can use the Fluke 566s bead probe, or plug in any industry standard K mini connector thermocouple probe to take super-heat or internal temperatures. Features of the Fluke 566 Infrared Thermometer:   User selectable C or F   Laser sighting for accuracy (<5.0 meters)   Optical Resolution: 30:1   Backlit LCD display   MIN/MAX/Average and DIF measurements   Adjustable emissivity for higher IR accuracy   Includes thermocouple: Bead probe   Compatibility with other K-type thermocouples   Hi/Low alarm when measurements exceed pre-set limits   Data Logging with date/time stamp: 20 points   Wide temperature range from -40 to 650C   12 hour battery life (2 AA batteries)   Multi-language menu display   Two years warranty Included Accessories: - K-Type thermocouple bead probe - Hard carrying case - 2 AA batteries - Quick start guide - User manual Infrared Digital Thermometers http://www.pat-services.co.uk/fluke-566-infrared-thermometer-1116.htm http://www.pat-services.co.uk/fluke-561-infrared-thermometer-1114.htm The Fluke 561 Infrared Thermometer is the ideal tool for quick and accurate non-contact temperature measurements.  It is a hand-held tool great for measuring surface temperature.  Fantastic for safe temperature measurement of rotating, hard to reach, electricity, live or dangerously hot targets like electrical motors or rotating parts such as conveyor belts, as well as heating and ventilation systems. Why use several tools for the job when the Fluke 561 combines temperature measurement functions that HVAC/R, industrial and electrical professionals need? A single point laser sighting helps you mark the measurement target, from either close up or far away.  Within seconds you will have your temperature read-out on screen with reliable accuracy. You can use the Fluke 561s Velcro pipe probe, or plug in any industry standard K mini connector thermocouple probe to take super-heat or internal temperatures. Features of the Fluke 561 Infrared Thermometer:   User selectable C or F   Laser sighting for accuracy (<2.5 meters)   Optical Resolution: 12:1   Backlit LCD display   MIN/MAX/Average and DIF measurements   Adjustable emissivity for higher IR accuracy   Includes thermocouple: Velcro pipe probe   Compatibility with other K-type thermocouples   Wide temperature range from -40 to 550C   12 hour battery life (2 AA batteries)   Two years warranty Included Accessories: - Thermocouple K-type Velcro pipe probe - Hand carrying case - 2 AA batteries - User manual with measurement guide Infrared Digital Thermometers http://www.pat-services.co.uk/fluke-561-infrared-thermometer-1114.htm http://www.pat-services.co.uk/fluke-360-leakage-clamp-meter-1112.htm The Fluke 360 is the perfect tool for non-invasive checks of insulation resistance.  It is portable, light weight and can fit into tight spaces, while the HOLD button will keep the results on the display to check after removal.  The unique design of the Fluke 360 eliminates interference from any adjacent current conductors. Fluke 360 Features:  Measure leakage current with a 3 mA range and touch current with a 1 A resolution  Accurate results are still available because of the Fluke 360s advanced shielding  Automatic ranging within the manually select mA or A range  Easy to view measurements on bargraph and digital display.  HOLD function is available when working in dark/hard to see locations  Can measure up to 60 A for all installation needs  With only a 40mm jaw the Fluke 360 easily fits into a pocket and is easy to carry  Auto power-off with audible buzzer  Conformance to IEC1010 and EMC standard  Meets all of the applications and performance classes in safety standard VDE0404-4 and the new VDE0702 Included Accessories: - Soft carry pouch - Users manual Current Clamps Meters http://www.pat-services.co.uk/fluke-360-leakage-clamp-meter-1112.htm http://www.pat-services.co.uk/fluke-355-ac-dc-clamp-1110.htm With True-RMS and current measurements of up to 2000 A, this makes the Fluke 355 a great choice clamp meter.  It comes with extra large jaws which allow it to clamp around large conductors found on many sites.  Designed with safety in mind the Fluke 355 has a rugged design, CAT IV 600 V and Cat III 1000 V ratings.  Accurate peak measurements are guaranteed by using the in-rush current mode perfect for inductive loads and motors. In addition to the Fluke 353, the Fluke 355 offers functions for measuring voltage and resistance, making this a very useful tool for industrial service technicians and electrical contractors. Fluke 355 Features: True-RMS measurements Display Backlight Motor start-up current Min/Max/Average Voltage AC/DC Resistance measurement Continuity measurement with beeper 100 hour batter life (with typical usage, backlight switched off) Two year warranty Included Accessories: - C43 Soft Meter Case - 6 AA batteries - TL224 SureGrip Silicone Test Lead Set - TP2 Slim Reach Test Probe Set (2mm) - AC285 SureGrip Alligator Set - Users manual Current Clamps Meters http://www.pat-services.co.uk/fluke-355-ac-dc-clamp-1110.htm http://www.pat-services.co.uk/fluke-353-ac-dc-clamp-1108.htm With True-RMS and current measurements of up to 2000 A, this makes the Fluke 353 a great choice clamp meter.  It comes with extra large jaws which allow it to clamp around large conductors, found on many sites.  Designed with safety in mind the Fluke 353 has a rugged design, CAT IV 600 V and Cat III 1000 V ratings.  Accurate peak measurements are guaranteed by using the in-rush current mode perfect for inductive loads and motors. Fluke 353 Features: True-RMS measurements Display Backlight Motor start-up current Min/Max/Average 100 hour batter life (with typical usage, backlight switched off) Two year warranty Included Accessories: - C43 Soft Meter Case - 6 AA batteries - Users manual Current Clamps Meters http://www.pat-services.co.uk/fluke-353-ac-dc-clamp-1108.htm http://www.pat-services.co.uk/digital-multimeter-electronics-1106.htm The Fluke 179 Electronics Combo Kit comes with: Fluke 179 True RMS Digital Multimeter TL224 SureGrip Silicone Test Lead Set TL910 Electronic Test Probe Set AC280 SureGrip Hook Clip Set TPAK Magnetic Hanger 80BK Integrated DMM Temperature Probe C35 Soft Meter Case The Fluke 179 series Digital Multimeters are the new benchmarks for general purpose multimeters. They set the standard with a combination of precision, features, ease-of-use, safety and reliability. All models offer True RMS AC voltage and current readings, 6000 count resolution, min-max average recording, as well as frequency and capacitance ranges. Despite all these and many other useful features, the 179 series remain easy to use. The ergonomic case with integrated holster protects the units in rough and tough environments. Safety conformance All inputs are protected to EN610101 - 1 CAT 1V 600/CAT 111 1000V.UL, CSA TUV listed and VDE pending. Features of the Fluke 179 Digital Multimeters Clear, easy to read, backlit display Temperature and frequency measurement Outer case with integral holster for arduous site conditions 33 segment, fast response analogue bargraph. The Fluke 179 is a fully featured autoranging digital multimeter designed for first level fault diagnosis on electrical and electronic systems and apparatus. It has the added features of temperature and frequency measurement Features: - True RMs measurements - Basic Accuracy 0.09% - Digital Display Counts 6000 - Voltage AC/DC (V) 1000 - Current AC/DC (A) 10 - Capacitance (uf) 10000 - Frequency (kHz) 100 - Resistance (Mohms) 50 - Display Backlight - Analog Bargraph Segments 33 - Auto and Manual Ranging - Display Hold and Auto Hold - Min-Max-Average Recording - Temperature -40 deg C to 400 Deg C - Smoothing mode filters rapidly changing inputs - Audible Continuity and Diode Test - Test Lead Alert - Unsafe Voltage Alert, Voltages Over 30V - Low Battery Indication - Ergonomic Case with Integrated Holster - Easy Battery Exchange - Selectable Sleep Mode Preserves Battery Life Included with all models: Test Leads, Installed 9V battery  Users manual. The 179 also includes the 80BK temperature probe. Digital Multimeters http://www.pat-services.co.uk/digital-multimeter-electronics-1106.htm http://www.pat-services.co.uk/robin-k4105-earth-resistance-tester-1102.htm For accurate resistance measurement of earth electrodes in accordance with the IEE Wiring Regulations. Robin offers a high performance digital instrument, which is lightweight and extremely easy to use.  It offers 3 earth resistance test ranges and can also measure the presence of earth voltage.  Also included is an instruction manual which explains how to perform earth tests.  Measures earth electrode resistance directly  Indicates if resistance of auxiliary spikes is within tolerance  Low power consumption  Drip-proof construction to IP54  Digital display  Carry case to hold instrument and accessories Included Accessories: Test Leads Auxiliary Earth Spikes Carrying Case Instruction Manual Certificate of Conformity Recommended Accessories: Calibration Earth Testers http://www.pat-services.co.uk/robin-k4105-earth-resistance-tester-1102.htm http://www.pat-services.co.uk/kewtech-multifunction-tester-1100.htm THIS IS THE NEW KT65 VERSION The kewtech KT65 Multifunction tester uses anti-trip technology and can perform Insulation, Continuity, Loop, PSC and RCD tests. Kewtech KT65 Features  Easy to use  Phase rotation in line with new 17th edition requirements  Advanced memory with free software  New Anti-Trip technology for full no trip LOOP testing on all RCD types  Test button in probe as well as lockdown test button for hands free testing  Easy PFC & PSC measurement without the need to alter test probes  250, 500 and 1000V insulation tests with auto discharge  Additional LED for warning of high voltage output in insulation test mode  Memory for test lead resistance compensation  Backlit display  Auto-test memory for RCD testing with all results shown on one screen  Conducts phase to phase loop tests  End of line calibration certificate included  Can be used with rechargeable batteries  Complies with BS7671 (Part P) Kewtech KT65 Accessories   Kamp 12 Mains lead   ACC065 G7 Test lead set   ACC064 SP Test remote with remote test button   Batteries   Test lead pouch   Soft carry case   Instruction Manual   Calibration Certificate Installation Testers http://www.pat-services.co.uk/kewtech-multifunction-tester-1100.htm http://www.pat-services.co.uk/kewtech-pat-adapter-1-1098.htm Convert your 17th edition multifunction or insulation/continuity tester into a PAT tester.  Works with all testers that use 4mm test leads, including Megger and Fluke. Covers all the mandatory tests demanded by the Code of Practice.  The new Code of Practice allows for 250V insulation tests.  In most cases this can replace leakage tests. The PAT Adapter enables all the following mandatory tests to be undertaken: Class 1  Earth bond -  Suitable for all appliances (including IT) using a Continuity Tester  Insulation at 250V or 500V using an Insulation Tester Class 2  Insulation at 250V or 500V using an Insulation Tester Extension Leads  (In conjunction with a Kewtech R2) PAT Tester Accessories http://www.pat-services.co.uk/kewtech-pat-adapter-1-1098.htm http://www.pat-services.co.uk/fluke-9040-phase-rotation-indicator-1096.htm The Fluke 9040 is effective for measuring phase rotation in all areas where three-phase supplies are used to feed motors, drives and electrical systems.  Using the LCD screen the Fluke 9040 can show a clear indication of the 3 phrase and the phase rotation direction to determine correct connections.  It allows a rapid determination of phase sequence and has a voltage and frequency range suitable for commercial and industrial use. Test probes come supplied and have a variable clamping range for safe contact, especially in industrial sockets.  No batteries are required. Contents included:  Alligator Clips Black (3)  Flexible Test Probes Black (3) Fuse Finders / Cable Locators http://www.pat-services.co.uk/fluke-9040-phase-rotation-indicator-1096.htm http://www.pat-services.co.uk/fluke-2042-cable-locator-1094.htm Fluke 2042 is ideal for tracing cables in walls and underground, locating fuse/breakers on final circuits and locating interruptions and short-circuits in cables and electrical floor heating systems.  It can also be used for tracing metallic water and heating pipes.  For all applications (live or dead cables) without additional instruments  Set includes a transmitter and a receiver  Proven digitally coded sender signal guarantees clear signal identification  Transmitter with LCD-display for transmitting level, transmitting code and external voltage  Receiver with a backlight LCD-display for level of receiving signal, code of receiving signal and live voltage indication  Automatic or manual adjustment of receiving signal sensitivity  Switchable acoustic receiving signal  Auto-Power-Off  Additional torch lamp for working in dark environments This cable locator comes with: TL27 Heavy Duty Test Lead Set (2) TP74 Lantern Tip Test Probe Set AC285 Alligator Clip Set Soft Carrying Case Hard Case Fuse Finders / Cable Locators http://www.pat-services.co.uk/fluke-2042-cable-locator-1094.htm http://www.pat-services.co.uk/fluke-sm300-socket-tester-1092.htm Fluke SocketMaster SM300 socket tester has the following features: Clear bi-colour LED and audible indication of wiring status Unique soft-touch RCD test checks 30mA RCD's for trip within 300mS Earth Volts TouchPad detects raised earth voltages >50v, indication potentially dangerous situations.   Socket Testers http://www.pat-services.co.uk/fluke-sm300-socket-tester-1092.htm http://www.pat-services.co.uk/flir-b40-thermal-imaging-camera-1089.htm The Flir b40 Thermal Imager is the latest product innovation from Flir for spotting building problems, identifying infiltration issues, evaluating water damage and energy preservation. At only 600g the Flir b40 Thermal Imaging Camera is so small and lightweight you can carry it with you anytime.  It is packed with features like visual camera, Fusion Picture-in-Picture, LED illuminating lights and many other analyzing functions. Flir b40 Thermal Imaging Camera Features: Visual Digital Camera Up to 0.6MP resolution at 120 x 120 pixels, with LED lights provides sharp images regardless of lighting conditions.Fusion Picture-in-Picture (PiP) The Flir B40 Infrared Camera features fusion picture-in-picture (PIP) that allows you to overlay the infrared image directly onto the corresponding visual image so you can see an infrared image super-imposed in a visible light image.  Accuracy 2% and 0.1C Thermal Sensitivity Provides the resolution needed to find problems faster and easier.Wide Temperature Range Measures from -20 to 120C targeting building applications.Small and lightweight At only 600g, the Flir b40 Thermal Imager is compact and lightweight, easy for getting into hard to reach places.Built-in LED lights Help you to do inspections in low light areas.Area (Min/Max) Mode A spot marker on the Flir b40 Infrared Camera shows the Minimum or the Maximum Temperature reading within the selected area.Radiometric JPEG Images Patented technology used to save images in standard JPEG format for easy e-mailing and analysis using QuickReport PC Software (included).Li-Ion Rechargable Battery Replaceable battery lasts for 5 hours of operating time.Thumbnail Image Gallery Shows you a complete overview of your findings.Insulation alarm Easily detects areas that don't fulfill the insulation requirements.Dew point alarm Displays areas with risk of surface condensation where mold growth could occur.NEW Laser Pointer Pin point the exact temperature quickly and easily.NEW Copy to USB Copy results to USB for quick data transfer.Other Flir Thermal Imaging Cameras:Flir i5, Flir i7, Flir InfraCam SD, Flir BCam SD, Flir b50, Flir b60, Flir i40, Flir i50, Flir i60, Flir T200, Flir T250, Flir T335, Flir T360, Flir T365, Flir T425, Flir B200, Flir B250, Flir B335, Flir B360, Flir B365, Flir B425 Click here for Thermal Imaging (Imager) Camera information.   Building Applications http://www.pat-services.co.uk/flir-b40-thermal-imaging-camera-1089.htm http://www.pat-services.co.uk/flir-b50-thermal-imaging-camera-1087.htm Buy a Flir b50 Thermal Imaging Camera now and you will receive the following items FREE in this exclusive offer: Additional Battery Flir Carry Pouch Extech Professional Home Inspection Kit including:- Pinless Moisture Meter- Mini IR Thermometer- Waterproof Stem Thermometer- Attractive Carry CaseStock is limited... So when theyre gone, theyre gone!The Flir b50 Thermal Imager is the latest product innovation from Flir for spotting building problems, identifying infiltration issues, evaluating water damage and energy preservation. At only 600g the Flir b50 Thermal Imaging Camera is so small and lightweight you can carry it with you anytime.  It is packed with features like visual camera, Fusion Picture-in-Picture, built-in Laser Pointer, LED illuminating lights and many other analyzing functions.Ideal for builders, property maintenance, glaziers, loft convertors and much more.Flir b50 Thermal Imaging Camera Features: Fusion Picture-in-Picture (PiP) The Flir B50 Infrared Camera features fusion picture-in-picture 3 step (PIP) that allows you to overlay the infrared image directly onto the corresponding visual image so you can see an infrared image super-imposed in a visible light image. Visual Digital Camera Up to 2.3MP resolution at 140 x 140 pixels, with LED lights provides sharp images regardless of lighting conditions.Accuracy 2% and 0.1C Thermal Sensitivity Provides the resolution needed to find problems faster and easier.Wide Temperature Range Measures from -20 to 120C targeting building application.Small and lightweight At only 600g, the Flir b50 Thermal Imager is compact and lightweight, easy for getting into hard to reach places.Built-in LED lights Help you to do inspections in low light areas.Area (Min/Max) Mode A spot marker on the Flir b50 Infrared Camera shows the Minimum or the Maximum Temperature reading within the selected area.Radiometric JPEG Images Patented technology used to save images in standard JPEG format for easy e-mailing and analysis using QuickReport PC Software (included).Li-Ion Rechargable Battery Replaceable battery lasts for 5 hours of operating time.Thumbnail Image Gallery Shows you a complete overview of your findings.Laser Pointer Built-in laser pointer increases accuracy by guiding you to the anomolies on the object.  This option is not available on the Flir b40 Thermal Imager.Insulation alarm Easily detects areas that don't fulfill the insulation requirements.Dew point alarm Displays areas with risk of surface condensation where mold growth could occur.Other Flir Thermal Imaging Cameras:Flir i5, Flir i7, Flir InfraCam SD, Flir BCam SD, Flir b40, Flir b60, Flir i40, Flir i50, Flir i60, Flir T200, Flir T250, Flir T335, Flir T360, Flir T365, Flir T425, Flir B200, Flir B250, Flir B335, Flir B360, Flir B365, Flir B425 Click here for Thermal Imaging (Imager) Camera information.   Building Applications http://www.pat-services.co.uk/flir-b50-thermal-imaging-camera-1087.htm http://www.pat-services.co.uk/flir-b60-thermal-imaging-camera-1085.htm The Flir b60 Thermal Imager is the latest product innovation from Flir for spotting building problems, identifying infiltration issues, evaluating water damage and energy preservation. At only 600g the Flir b60 Thermal Imaging Camera is so small and lightweight you can carry it with you anytime.  It is packed with features like visual camera, Fusion Picture-in-Picture, built-in Laser Pointer, Laser Locator, LED illuminating lights and many other analyzing functions. Flir b60 Thermal Imaging Camera features: Visual Digital Camera Up to 2.3MP resolution at 180 x 180 pixels, with LED lights provides sharp images regardless of lighting conditions.Fusion Picture-in-Picture (PiP) The Flir B50 Infrared Camera features fusion picture-in-picture scalable (PIP) that allows you to overlay the infrared image directly onto the corresponding visual image so you can see an infrared image super-imposed in a visible light image.  NEW NETD 70mK, Accuracy 2% and 0.1C Thermal Sensitivity Provides the resolution needed to find problems faster and easier.Wide Temperature Range Measures from -20 to 120C targeting building applications.Small and lightweight At only 600g, the Flir b60 Thermal Imager is compact and lightweight, easy for getting into hard to reach places.Built-in LED lights Help you to do inspections in low light areas.Area (Min/Max) Mode A spot marker on the Flir b60 Infrared Camera shows the Minimum or the Maximum Temperature reading within the selected area.  Auto Hot/Cold spot marker function shows a spot within the area that automatically finds the hottest or coldest spot within the box.Radiometric JPEG Images Patented technology used to save images in standard JPEG format for easy e-mailing and analysis using QuickReport PC Software (included).Li-Ion Rechargable Battery Replaceable battery lasts for 5 hours of operating time.Thumbnail Image Gallery Shows you a complete overview of your findings.Laser Pointer Built-in laser pointer increases accuracy by guiding you to the anomolies on the object.Laser LocatorFor even more accurate readings, you can how exactly where the laser is pointing on the Flir B60's screen.  This feature is not available on the Flir b40 and Flir b50.Insulation alarm Easily detects areas that don't fulfill the insulation requirements.Dew point alarm Displays areas with risk of surface condensation where mold growth could occur.NEW Copy to USB Copy results to USB for quick data transfer.NEW MeterLink New technology allowing you to wirelessly connect FLIR infrared cameras to Bluetooth Extech meters (e.g. Extech InspectorPro MO297 Multi-function Moisture Meter and Psychrometer) This data is instantly imprinted onto the thermal image.NEW Bluetooth Voice Annotation Make wireless comments in connection to the thermal images as you make an inspection.Other Flir Thermal Imaging Cameras:Flir i5, Flir i7, Flir InfraCam SD, Flir BCam SD, Flir b40, Flir b50, Flir i40, Flir i50, Flir i60, Flir T200, Flir T250, Flir T335, Flir T360, Flir T365, Flir T425, Flir B200, Flir B250, Flir B335, Flir B360, Flir B365, Flir B425 Click here for Thermal Imaging (Imager) Camera information. Building Applications http://www.pat-services.co.uk/flir-b60-thermal-imaging-camera-1085.htm http://www.pat-services.co.uk/digital-infrared-thermometer-1083.htm Reach for a rugged Fluke 60 series Infrared (IR) thermometer for jobs requiring temperature measurement in hard-to-reach, hot, rotating, or dangerous situations Get accurate readings over a broad range of temperatures -40C to 760C (-40 F to 1400 F). Plus, the enhanced optics allow you to measure smaller objects further away. All with a comfortable and easy to use handheld device. Main features of the Fluke 68: Laser guided sighting system for easy targeting with 1 % accuracy 12-point data logging Advanced optics to measure smaller targets at greater distances Adjustable emissivity for more accurate temperature measurements Selectable MAX, MIN, DIF and AVG functions that display values instantly with Hi/Lo Alarm Expanded measurement range up to 760 C (1400 F) Optional probe accessory available for dual contact and non-contact temperature measurements Infrared Digital Thermometers http://www.pat-services.co.uk/digital-infrared-thermometer-1083.htm http://www.pat-services.co.uk/digital-infrared-thermometer-1081.htm Reach for a rugged Fluke 60 series Infrared (IR) thermometer for jobs requiring temperature measurement in hard-to-reach, hot, rotating, or dangerous situations Get accurate readings over a broad range of temperatures -40C to 760C (-40 F to 1400 F). Plus, the enhanced optics allow you to measure smaller objects further away. All with a comfortable and easy to use handheld device. Features of the Fluke 66 Infrared thermometer Laser guided sighting system for easy targeting with 1 % accuracy 12-point data logging Advanced optics to measure smaller targets at greater distances Adjustable emissivity for more accurate temperature measurements Selectable MAX, MIN, DIF and AVG functions that display values instantly with Hi/Lo Alarm Expanded measurement range up to 600 C (1100 F) Optional probe accessory available for dual contact and non-contact temperature measurements Infrared Digital Thermometers http://www.pat-services.co.uk/digital-infrared-thermometer-1081.htm http://www.pat-services.co.uk/digital-infrared-thermometer-1079.htm Reach for a rugged Fluke 60 series Infrared (IR) thermometer for jobs requiring temperature measurement in hard-to-reach, hot, rotating, or dangerous situations Get accurate readings over a broad range of temperatures -40C to 760C (-40 F to 1400 F). Plus, the enhanced optics allow you to measure smaller objects further away. All with a comfortable and easy to use handheld device. The Fluke 63 Features: High-resolution optics High accuracy: 1 % and repeatability: 0.5 % MAX temperature display Laser targeting Backlit display Expanded measurement range up to 535 C (999 F) Infrared Digital Thermometers http://www.pat-services.co.uk/digital-infrared-thermometer-1079.htm http://www.pat-services.co.uk/fluke-62-mini-infrared-thermometer-1077.htm Features of the Fluke 62 Mini Digital Infrared Thermometer Single point offset laser sighting Best accuracy in its class: + 1% of reading Holds temperature readings for 7 seconds Dual displays shows current and MAX measurements     simultaneously Backlit display for poorly lit areas Comfortable ergonomic handle with protective rubber boot for     added durability Fitted carrying case Robust, award winning design Wide temperature range from -30 to 500C (20 to 932F) The Fluke 62 is ideal for professional diagnostics, for quick, accurate and non-contact temperature measurements. It is a hand-held tool great for measuring surface temperature. Great for safe temperature measurement of rotating, hard to reach, electricity, live or dangerously hot targets like electrical motors or rotating parts such as conveyor belts, as well as heating and ventillation systems. A single point laser sighting helps you mark the measurement target, from either close up or far away. Within seconds you will have your temperature read-out on screen with reliable accuracy. Infrared Digital Thermometers http://www.pat-services.co.uk/fluke-62-mini-infrared-thermometer-1077.htm http://www.pat-services.co.uk/fluke-t5-h5-1ac-kit-1075.htm The Fluke T5-H5-1AC Kit includes: T5-1000 Electrical Tester H5 Holster 1 AC VoltAlert Features of the T5-1000 The Fluke T5-1000 Voltage, Continuity and Current tester lets you check voltage, continuity and current with just one compact tool. Select Volts, ohms or current and the instrument does the rest. This models measure 1000 volts AC/DC Voltage Detectors / Volt Sticks http://www.pat-services.co.uk/fluke-t5-h5-1ac-kit-1075.htm http://www.pat-services.co.uk/voltage-continuity-current-testers-1073.htm The fast and easy solution to basic electrical testing. The Fluke T5-1000 Voltage, Continuity and Current tester lets you check voltage, continuity and current with just one compact tool. Select Volts, ohms or current and the instrument does the rest. This models measure 1000 volts AC/DC For 600 volts see the T5-600 model. The OpenJaw current technology lets you check current up to 100A without breaking the circuit. Features of the T5-1000 Display count Automatic selection Continuity Bleeper Sleep mode AC Voltage - 1000v DC Voltage - 1000v AC Current - 100A Resistance - 1000 ohms Safety Range - 1000V CAT III 400 hours of battery life Weight -0.38kg Size (HxWxD) - 203mm x 51mm x 30.5mm Two year warrantyThe Fluke T5-1000 Voltage, Continuity and Current tester lets you check voltage, continuity and current with just one compact tool. Select Volts, ohms or current and the instrument does the rest. Voltage Detectors / Volt Sticks http://www.pat-services.co.uk/voltage-continuity-current-testers-1073.htm http://www.pat-services.co.uk/voltage-continuity-current-testers-1071.htm The fast and easy solution to basic electrical testing. The Fluke T5-600 Voltage, Continuity and Current tester lets you check voltage, continuity and current with just one compact tool. Select Volts, ohms or current and the instrument does the rest. This models measure 600 volts AC/DC For 1000 volts see the T5-1000 model. The OpenJaw current technology lets you check current up to 100A without breaking the circuit. Features and Specifications of the T5-600 Display count Automatic selection Continuity Bleeper Sleep mode AC Voltage - 600v DC Voltage - 600v AC Current - 100A Resistance - 1000 ohms Safety Range - 600V CAT III 400 hours of battery life Weight -0.38kg Size (HxWxD) - 203mm x 51mm x 30.5mm Two year warranty Voltage Detectors / Volt Sticks http://www.pat-services.co.uk/voltage-continuity-current-testers-1071.htm http://www.pat-services.co.uk/digital-multimeter-industrial-1069.htm The Fluke 179 Industrial Combo Kit comes with: Fluke 179 True RMS Digital Multimeter Set of TP4 Slim Reach Probes Set of AC220 SureGrip Crocodile Clips TL224 SureGrip Silicone Test Lead Set C35 Carry Pouch TPAK Magnetic Hanger Strap Maglite Type K Thermo Couple The Fluke 179 series Digital Multimeters are the new benchmarks for general purpose multimeters. They set the standard with a combination of precision, features, ease-of-use, safety and reliability. All models offer True RMS AC voltage and current readings, 6000 count resolution, min-max average recording, as well as frequency and capacitance ranges. Despite all these and many other useful features, the 179 series remain easy to use. The ergonomic case with integrated holster protects the units in rough and tough environments. Safety conformance All inputs are protected to EN610101 - 1 CAT 1V 600/CAT 111 1000V.UL, CSA TUV listed and VDE pending. Features of the Fluke 179 Digital Multimeters Clear, easy to read, backlit display Temperature and frequency measurement Outer case with integral holster for arduous site conditions 33 segment, fast response analogue bargraph. The Fluke 179 is a fully featured autoranging digital multimeter designed for first level fault diagnosis on electrical and electronic systems and apparatus. It has the added features of temperature and frequency measurement Features: - True RMs measurements - Basic Accuracy 0.09% - Digital Display Counts 6000 - Voltage AC/DC (V) 1000 - Current AC/DC (A) 10 - Capacitance (uf) 10000 - Frequency (kHz) 100 - Resistance (Mohms) 50 - Display Backlight - Analog Bargraph Segments 33 - Auto and Manual Ranging - Display Hold and Auto Hold - Min-Max-Average Recording - Temperature -40 deg C to 400 Deg C - Smoothing mode filters rapidly changing inputs - Audible Continuity and Diode Test - Test Lead Alert - Unsafe Voltage Alert, Voltages Over 30V - Low Battery Indication - Ergonomic Case with Integrated Holster - Easy Battery Exchange - Selectable Sleep Mode Preserves Battery Life Included with all models: Test Leads, Installed 9V battery  Users manual. The 179 also includes the 80BK temperature probe. Digital Multimeters http://www.pat-services.co.uk/digital-multimeter-industrial-1069.htm http://www.pat-services.co.uk/fluke-117-322-kit-electricians-1067.htm This Fluke Combo kit has been speciall put together for Electrician's. This Fluke Combo Kit has been  selected for both predictive maintenance and troubleshooting. This kit gives you great savings over buying testers individually and contains: Fluke 117 True RMS Multimeter Fluke 322 Clamp Meter TL75 Hard Point Test Lead Set TPAK Magnetic Hanger C115 Deluxe carrying case with shoulder strap     Digital Multimeters http://www.pat-services.co.uk/fluke-117-322-kit-electricians-1067.htm http://www.pat-services.co.uk/fluke-113-digital-multimeter-1065.htm The Fluke 113 Digital Multimeter is a compact design for easy ergonomic, one0handed operation. It come in the familiar Fkluke yellow and robust casing and has a large easy to read display. Included with the 113 digital Multimeter:  Test Leads Holster, Installed 9V battery  User maunals. Digital Multimeters http://www.pat-services.co.uk/fluke-113-digital-multimeter-1065.htm http://www.pat-services.co.uk/tp165x-remote-control-1063.htm The Fluke TP165X Remote Control Probe is great for using wity the 1650 series of Fluke Multifunction testers. Simply press the button on the probe to take your readings. You don't have to take your eye off he job! Accessories http://www.pat-services.co.uk/tp165x-remote-control-1063.htm http://www.pat-services.co.uk/fluke-tl165-uk-standard-test-1060.htm Fluke TL165/UK Standard Test Lead Set Consists of Red, Blue and Green Leads for use with Multifunction testers. Accessories http://www.pat-services.co.uk/fluke-tl165-uk-standard-test-1060.htm http://www.pat-services.co.uk/fluke-mtc1363-main-test-cord-1058.htm Fluke MTC1363 Main Test Cord, test lead. Can be used with the Fluke 1650 series of testers. Accessories http://www.pat-services.co.uk/fluke-mtc1363-main-test-cord-1058.htm http://www.pat-services.co.uk/flir-i5-thermal-imaging-camera-1056.htm  Buy a Flir i5 Thermal Imaging Camera now and you will receive the following items FREE in this exclusive offer: Additional Battery Flir Carry Pouch Flir Hard Carry Case Extech Industrial Troubleshooting Kit including:- True RMS, autoranging multimeter with 11 functions- 400A Clamp meter with basic AC Current and 1mA resolution- InfraRed Thermometer (-58 to 1000F/-50 to 538C) with laser pointer- Non-contact voltage detector (from 100V to 600V AC)- Test Leads and Type K Temperature Probe- Heavy Duty Carry CaseStock is limited... So when theyre gone, theyre gone!The new Flir i5 Thermal Imager is the smallest, lightest and most affordable infrared, thermal camera on the market. It is incredibly easy to use and requires no former experience. It really is a matter of point-shoot-detect to obtain high-quality infrared images that will immediately give you the infrared information you need. With a great quality thermal image of your subject. A Flir i5 Infrared Camera is a powerful predictive maintenance tool, as in many instances equipment failure is preceded by a period of increasing heat. A Flir i5 thermal imaging camera is also an excellent building inspection instrument, it quickly scans and identifies problem areas that can't be seen by the naked eye. Many businesses use the Flir i5 for repair verification and insurance purposes. Key features of the Flir i5 Thermal Imaging Camera are: Detect hidden problems Make quick damage assessments Perform preventive maintenance inspections Survey buildings to find moisture and leaks Identify energy losses and poor insulation Spot electrical faults before it is too late Produce instant infrared images of your findings Create reports, analyse and document your findings with     the easy-to-use software The Flir i5 Thermal Imager Camera has all of the same great features of the other Flir Cameras in the Flir i - Thermal Imaging Camera range: Small and lightweight (only 300g) Easy to use Renowned picture quality Robust functionality Additional Features of The Flir i5 Infrared Camera: Fully Automatic Small and Lightweight 2.8" LCD screen 5 hours battery life +2% accuracy Ideal for easily detecting temperature rises in the body. A previous customer even bought the Flir i5 to detect H1N1 swine flu! Get 1 day Thermal Imaging Training course with Flir for only 225 per person when you purchase this item from us, just ask for more details.Other Flir Thermal Imaging Cameras:Flir i7, Flir InfraCam SD, Flir BCam SD, Flir b40, Flir b50, Flir b60, Flir i40, Flir i50, Flir i60, Flir T200, Flir T250, Flir T335, Flir T360, Flir T365, Flir T425, Flir B200, Flir B250, Flir B335, Flir B360, Flir B365, Flir B425 Click here for Thermal Imaging (Imager) Camera information.   Electrical Applications http://www.pat-services.co.uk/flir-i5-thermal-imaging-camera-1056.htm http://www.pat-services.co.uk/flir-i40-thermal-imaging-camera-1054.htm NEW Flir i40 Thermal Imager Camera is the latest product innovation from Flir Systems. Our Flir i40 Thermal Imaging Camera now comes with: FREE 1 Day training course - ask for more details FREE Quick Support Software Companies are using the Flir i40 Infrared Camera is great for spotting electrical problems, identifying mechanical issues, predictive maintenance and energy preservation.  It has the same great features as all of the Thermal Imaging Cameras in the Flir (i) range such as being small, robust light weight, easy-to-use and having excellent picture quality.Key features of the Flir i40 Thermal Imaging Camera: Visual Digital Camera Up to 0.6MP resolution at 120 x 120 pixels, with LED lights provides sharp images regardless of lighting conditions. Fusion Picture-in-Picture (PIP) The Flir i40 Infrared Camera features fusion picture-in-picture (PIP) that allows you to overlay the infrared image directly onto the corresponding visual image so you can see an infrared image super-imposed in a visible light image. Accuracy 2% and 0.1C Thermal Sensitivity Provides the resolution needed to find problems faster and easier. Wide Temperature Range Measures from -20 to 350C targeting electrical and mechanical applications. Small and lightweight At only 600g, the Flir i40 Thermal Imager is compact and lightweight, easy for getting into hard to reach places.Built-in LED lights Help you to do inspections in low light areas. Area (Min/Max) Mode Spot marker shows the Minumum or the Maximum Temperature reading within the selected area.Radiometric JPEG Images Patented technology used to save images in standard JPEG format for easy e-mailing and analysis using QuickReport PC Software (included). Li-Ion Rechargable Battery Replaceable battery lasts for 5 hours of operating time. Thumbnail Image Gallery Shows you a complete overview of your finding on the Flir i40 Thermal Imaging Camera screen.NEW Laser Pointer Pin point the exact temperature quickly and easily.NEW Copy to USB Copy results to USB for quick data transfer.NEW IR Window Correction When inspecting high voltage through safety IR windows this software corrects the image and severely improves quality.Other Flir Thermal Imaging Cameras:Flir i5, Flir i7, Flir InfraCam SD, Flir BCam SD, Flir b40, Flir b50, Flir b60, Flir i50, Flir i60, Flir T200, Flir T250, Flir T335, Flir T360, Flir T365, Flir T425, Flir B200, Flir B250, Flir B335, Flir B360, Flir B365, Flir B425 Click here for Thermal Imaging (Imager) Camera information.   Electrical Applications http://www.pat-services.co.uk/flir-i40-thermal-imaging-camera-1054.htm http://www.pat-services.co.uk/flir-i60-thermal-imaging-camera-1052.htm The NEW Flir i60 Thermal Imager is one of the latest thermal imaging product innovations from Flir Systems. Our Flir i60 Thermal Imaging Camera now comes with: FREE 1 Day training course - ask for more details FREE Quick Support Software Companies are using the Flir i60 Infrared Camera is great for spotting electrical problems, identifying mechanical issues, predictive maintenance and energy preservation.  It has the same great features as all of the Thermal Imaging Cameras in the Flir (i) range such as being small, robust light weight, easy-to-use and having excellent picture quality.  The Flir i60 Infrared Camera has lots of great featuresyou won't be disapointed with this latest and most advanced model in the Flir Thermal Imaging Camera (i) range. Key features of the Flir i60 Thermal Imaging Camera: Visual Digital Camera Up to 2.3MP resolution at 180 x 180 pixels, with LED lights provides sharp images regardless of lighting conditions. Fusion Picture-in-Picture (PIP) The Flir i60 Infrared Camera features fusion picture-in-picture scalable (PIP) that allows you to overlay the infrared image directly onto the corresponding visual image so you can see an infrared image super-imposed in a visible light image. Accuracy 2% and 0.1C Thermal Sensitivity Provides the resolution needed to find problems faster and easier. Wide Temperature Range Measures from -20 to 350C targeting electrical and mechanical applications. Small and lightweight At only 600g, the Flir i60 Thermal Imager is compact and lightweight, easy for getting into hard to reach places.Built-in LED lights Help you to do inspections in low light areas. Area (Min/Max) Mode Spot marker shows the Minumum or the Maximum Temperature reading within the selected area.Radiometric JPEG Images Patented technology used to save images in standard JPEG format for easy e-mailing and analysis using QuickReport PC Software (included). Li-Ion Rechargable Battery Replaceable battery lasts for 5 hours of operating time. Thumbnail Image Gallery Shows you a complete overview of your finding on the Flir i60 Thermal Imaging Camera screen.Laser Pointer Built-in laser pointer increases accuracy by guiding you to the anomolies on the object.Laser LocatorFor even more accurate readings, you can how exactly where the laser is pointing on the Flir i60's screen.  This feature is not available on the Flir i40 and Flir i50.NEW Copy to USB Copy results to USB for quick data transfer.NEW IR Window Correction When inspecting high voltage through safety IR windows this software corrects the image and severely improves quality.NEW MeterLink New technology allowing you to wirelessly connect FLIR infrared cameras to Bluetooth Extech meters (e.g. Extech EX8451000 ACA Clamp Meter) This data is instantly imprinted onto the thermal image.NEW Bluetooth Voice Annotation Make wireless comments in connection to the thermal images as you make an inspection.Other Flir Thermal Imaging Cameras:Flir i5, Flir i7, Flir InfraCam SD, Flir BCam SD, Flir b40, Flir b50, Flir b60, Flir i40, Flir i50, Flir T200, Flir T250, Flir T335, Flir T360, Flir T365, Flir T425, Flir B200, Flir B250, Flir B335, Flir B360, Flir B365, Flir B425 Click here for Thermal Imaging (Imager) Camera information.   Electrical Applications http://www.pat-services.co.uk/flir-i60-thermal-imaging-camera-1052.htm http://www.pat-services.co.uk/fluke-416d-laser-distance-meter-1048.htm The 416D Laser Distance Meter is a professional grade laser distance measuring tool that is fast, easy to use and fits in your pocket. The 416D brings you the most advanced measuring technology. It is fast, accurate, durable and easy to use, just point and shoot. The design is straight forward with one button operation means you spend less time measuring. Unlike ultra sonic distance meters with laser pointers, the Fluke 416D and 411D use precision narrow laser beam that can avoid the common errors caused by extraneous objects near measurement targets. The compact handy Fluke distance meter is designed for indoor, and limited out door applications. Addition, subtraction, area and volume calculations could not be simpler. The extra bright laser is clearly visible so you can see your targeting point even if an object is hard-to-reach or distant. The Fluke 416D has a large LCD screen and buttons positioned for one-handed measurements.   Key features: Reduction of estimation errors, saving both time and money. Instant measurement with one-button operation. Easy targeting with bright laser. Quick calculation of area (square footage) and volume. Easy addition and subtraction measurement. Improved battery life from automatic shut-off feature. Pythagoras calculation for determining distance indirectly from two other measurements. Pouch Ability to view more with large, 3-line display with backlight. Ability to measure up to 60m (200 feet). Storeage of the last 10 measurements for quick recall of distance. MIN/MAX function. Enhanced pythagora calculation for determining distance indirectly from three other measurements. Audible feedback of on and off modes. Strong environment protection with IP54 (water spray & dust proof) sealing.   Technical Specification Range (for extended distances, use a target plate) 60m Accuracy + 1.5mm Measurement units 00.000m Measurement storage 10 locations Battery life up to 5000 readings 2 Years Warranty       Distance Meters http://www.pat-services.co.uk/fluke-416d-laser-distance-meter-1048.htm http://www.pat-services.co.uk/fluke-411d-laser-distance-meter-1046.htm The 411D Laser Distance Meter is a professional grade laser distance measuring tool that is fast, easy to use and fits in your pocket. The 411D brings you the most advanced measuring technology. It is fast, accurate, durable and easy to use, just point and shoot. The design is straight forward with one button operation means you spend less time measuring. Unlike ultra sonic distance meters with laser pointers, the Fluke 416D and 411D use precision narrow laser beam that can avoid the common errors caused by extraneous objects near measurement targets. The compact handy Fluke distance meter is designed for indoor, and limited out door applications. Addition, subtraction, area and volume calculations could not be simpler. The extra bright laser is clearly visible so you can see your targeting point even if an object is hard-to-reach or distant. The Fluke 411D has a large LCD screen and buttons positioned for one-handed measurements.   Key features: Reduction of estimation errors, saving both time and money. Instant measurement with one-button operation. Easy targeting with bright laser. Quick calculation of area (square footage) and volume. Easy addition and subtraction measurement. Improved battery life from automatic shut-off feature. Pythagoras calculation for determining distance indirectly from two other measurements. Pouch   Technical Specification Range (for extended distances, use a target plate) 30m Accuracy + 3mm Measurement units 00.000m Battery life up to 3000 readings 2 Years Warranty       Distance Meters http://www.pat-services.co.uk/fluke-411d-laser-distance-meter-1046.htm http://www.pat-services.co.uk/flir-i50-thermal-imaging-camera-1029.htm Lightweight design, heavyweight performer... The fully featured Flir i50 Thermal Imager Camera with visual thermal imaging includes many analyzing functions such as Picture-in-Picture and laser pointer - This Flir Thermal Imaging Camera is a great addition to the Flir thermal imaging range. Our Flir i50 Thermal Imaging Camera now comes with: FREE 1 Day training course - ask for more details FREE Quick Support Software  Companies are using the Flir i50 Infrared Camera is great for spotting electrical problems, identifying mechanical issues, predictive maintenance and energy preservation.  It has the same great features as all of the Thermal Imaging Cameras in the Flir (i) range such as being small, robust light weight, easy-to-use and having excellent picture quality. Use the Flir i50 Thermal Imaging Camera to perform: Safety Inspections Repair verification Unplanned shutdown avoidance New installation evaluation Preventative maintenance Key features of the Flir i50 Thermal Imaging Camera: Visual Digital Camera Up to 2.3MP resolution at 140 x 140 pixels, with LED lights provides sharp images regardless of lighting conditions. Fusion Picture-in-Picture (PIP) The Flir i50 Infrared Camera features fusion picture-in-picture 3 step (PIP) that allows you to overlay the infrared image directly onto the corresponding visual image so you can see an infrared image super-imposed in a visible light image. Accuracy 2% and 0.1C Thermal Sensitivity Provides the resolution needed to find problems faster and easier. Wide Temperature Range Measures from -20 to 350C targeting electrical and mechanical applications. Small and lightweight At only 600g, the Flir i50 Thermal Imager is compact and lightweight, easy for getting into hard to reach places.Built-in LED lights Help you to do inspections in low light areas. Area (Min/Max) Mode Spot marker shows the Minumum or the Maximum Temperature reading within the selected area.Radiometric JPEG Images Patented technology used to save images in standard JPEG format for easy e-mailing and analysis using QuickReport PC Software (included). Li-Ion Rechargable Battery Replaceable battery lasts for 5 hours of operating time. Thumbnail Image Gallery Shows you a complete overview of your finding on the Flir i50 Thermal Imaging Camera screen.Laser Pointer Built-in laser pointer increases accuracy by guiding you to the anomolies on the object.NEW Copy to USB Copy results to USB for quick data transfer.NEW IR Window Correction When inspecting high voltage through safety IR windows this software corrects the image and severely improves quality.Other Flir Thermal Imaging Cameras:Flir i5, Flir i7, Flir InfraCam SD, Flir BCam SD, Flir b40, Flir b50, Flir b60, Flir i40, Flir i60, Flir T200, Flir T250, Flir T335, Flir T360, Flir T365, Flir T425, Flir B200, Flir B250, Flir B335, Flir B360, Flir B365, Flir B425 Click here for Thermal Imaging (Imager) Camera information.   Electrical Applications http://www.pat-services.co.uk/flir-i50-thermal-imaging-camera-1029.htm http://www.pat-services.co.uk/seaward-primetest-350-kit-3-1027.htm An excellent professional PAT testing kit with PATGuard Elite Software for data management and a Barcode Scanner to speed up your testing! Seaward PrimeTest 350 Kit 3 - Elite Scanner PAT Tester Kit includes: Seaward PrimeTest 350 PAT Tester Seaward PATGuard Elite V2 Software Bluetooth Barcode Scanner 1000 Barcode Labels 1000 Passed Labels 500 Failed Labels 500 Cable Wraps  Socket & See SOK 32 Professional Socket Tester 230v Plug (13amp) to IEC Socket IEC Socket to 110v Plug (16amp) Delux Carry Case for easy transportation and protection of your PAT Testing Kit!  Comes with customisable foam, so you can snugly fit whatever equipment you would like to take on siteThe PrimeTest 350 is supplied with: Soft Carry Case Test Lead and Crocodile Clip Earth Bond Lead Mains Lead 6 AA In-Situ Rechargeable Batteries Battery Charger 240v Plug to 110v Adapter for testing 110v appliances RS232 Download Lead USB to Serial Adaptor (to connect your Seaward PrimeTest 350 to the PC) Reference Guide Instruction Manual with CD The Seaward PrimeTest 350 is ideal for PAT Testers, Electrical Contractors, Facilities Managers and Manufacturers. Thanks to the revolutionary PrimeTest 350 PAT Tester, you can shorten your working hours because this top of the range PAT Tester is loaded with the latest technology making testing faster and more efficient. Bluetooth technology means it communicates with all your Bluetooth accessories without using wires.  In fact, there are no wires at all because it runs on high powered In-Situ rechargeable batteries so youre free to move from test to test.  Weighing in at under 1kg and measuring only 26 x 10cm makes the PrimeTest 350 the ideal tester for getting into hard to reach places. The PrimeTest 350 PAT Tester is a facilities management tool because through data logging and capture it also records asset location helping you meet Health and Safety standards.  Whats more, this PAT Tester does every test you need to meet the IET Code of Practice revisions. Thanks to the revolutionary PrimeTest 350 PAT Tester, you can shorten your working hours because this top of the range PAT Tester is loaded with the latest technology making testing faster and more efficient. Bluetooth technology means it communicates with all your Bluetooth accessories without using wires.  In fact, there are no wires at all because it runs on high powered In-Situ rechargeable batteries so youre free to move from test to test.  Weighing in at under 1kg and measuring only 26 x 10cm makes the PrimeTest 350 the ideal tester for getting into hard to reach places. The PrimeTest 350 PAT Tester is a facilities management tool because through data logging and capture it also records asset location helping you meet Health and Safety standards.  Whats more, this PAT Tester does every test you need to meet the IET Code of Practice revisions. Features of the PrimeTest 350: Hand Held Battery Powered Definable Test USB and Bluetooth Download 6 AA In-situ Rechargeable Batteries Alternative Leakage Test, as described in the IET Code of Practice. 250v Insulation Test.  For use when suppressors or other components prevent a 500V insulation test. Load Measurement. During the protective conductor and touch current tests, the load is measured and displayed as both a power and current measurement.Calibration is NOT included. Seaward PrimeTest 350 Kits http://www.pat-services.co.uk/seaward-primetest-350-kit-3-1027.htm http://www.pat-services.co.uk/seaward-primetest-350-kit-2-1025.htm An excellent professional PAT testing starter kit with PATGuard Elite Software for data management! Seaward PrimeTest 350 Kit 2 - Data Management PAT Tester Kit includes: Seaward PrimeTest 350 PAT Tester Seaward PATGuard Elite V2 Software 1000 Passed Labels 500 Failed Labels 500 Cable Wraps  Socket & See SOK 32 Professional Socket Tester 230v Plug (13amp) to IEC Socket IEC Socket to 110v Plug (16amp) Delux Carry Case for easy transportation and protection of your PAT Testing Kit!  Comes with customisable foam, so you can snugly fit whatever equipment you would like to take on siteThe PrimeTest 350 is supplied with: Soft Carry Case Test Lead and Crocodile Clip Earth Bond Lead Mains Lead 6 AA In-Situ Rechargeable Batteries Battery Charger 240v Plug to 110v Adapter for testing 110v appliances RS232 Download Lead USB to Serial Adaptor (to connect your Seaward PrimeTest 350 to the PC) Reference Guide Instruction Manual with CD The Seaward PrimeTest 350 is ideal for PAT Testers, Electrical Contractors, Facilities Managers and Manufacturers. Thanks to the revolutionary PrimeTest 350 PAT Tester, you can shorten your working hours because this top of the range PAT Tester is loaded with the latest technology making testing faster and more efficient. Bluetooth technology means it communicates with all your Bluetooth accessories without using wires.  In fact, there are no wires at all because it runs on high powered In-Situ rechargeable batteries so youre free to move from test to test.  Weighing in at under 1kg and measuring only 26 x 10cm makes the PrimeTest 350 the ideal tester for getting into hard to reach places. The PrimeTest 350 PAT Tester is a facilities management tool because through data logging and capture it also records asset location helping you meet Health and Safety standards.  Whats more, this PAT Tester does every test you need to meet the IET Code of Practice revisions. Thanks to the revolutionary PrimeTest 350 PAT Tester, you can shorten your working hours because this top of the range PAT Tester is loaded with the latest technology making testing faster and more efficient. Bluetooth technology means it communicates with all your Bluetooth accessories without using wires.  In fact, there are no wires at all because it runs on high powered In-Situ rechargeable batteries so youre free to move from test to test.  Weighing in at under 1kg and measuring only 26 x 10cm makes the PrimeTest 350 the ideal tester for getting into hard to reach places. The PrimeTest 350 PAT Tester is a facilities management tool because through data logging and capture it also records asset location helping you meet Health and Safety standards.  Whats more, this PAT Tester does every test you need to meet the IET Code of Practice revisions. Features of the PrimeTest 350: Hand Held Battery Powered Definable Test USB and Bluetooth Download 6 AA In-situ Rechargeable Batteries Alternative Leakage Test, as described in the IET Code of Practice. 250v Insulation Test.  For use when suppressors or other components prevent a 500V insulation test. Load Measurement. During the protective conductor and touch current tests, the load is measured and displayed as both a power and current measurement. Calibration is NOT included. Seaward PrimeTest 350 Kits http://www.pat-services.co.uk/seaward-primetest-350-kit-2-1025.htm http://www.pat-services.co.uk/seaward-primetest-350-kit-1-1023.htm An excellent professional PAT testing starter kit! Seaward PrimeTest 350 Kit 1 - Basic Starter PAT Tester Kit includes: Seaward PrimeTest 350 PAT Tester 1000 Passed Labels 500 Failed Labels 500 Cable Wraps Socket & See SOK 32 Professional Socket Tester 230v Plug (13amp) to IEC Socket IEC Socket to 110v Plug (16amp) PAT Testing Log book (to record your test results) Delux Carry Case for easy transportation and protection of your PAT Testing Kit!  Comes with customisable foam, so you can snugly fit whatever equipment you would like to take on siteThe PrimeTest 350 is supplied with: Soft Carry Case Test Lead and Crocodile Clip Earth Bond Lead Mains Lead 6 AA In-Situ Rechargeable Batteries Battery Charger 240v Plug to 110v Adapter for testing 110v appliances RS232 Download Lead USB to Serial Adaptor (to connect your Seaward PrimeTest 350 to the PC) Reference Guide Instruction Manual with CD The Seaward PrimeTest 350 is ideal for PAT Testers, Electrical Contractors, Facilities Managers and Manufacturers. Thanks to the revolutionary PrimeTest 350 PAT Tester, you can shorten your working hours because this top of the range PAT Tester is loaded with the latest technology making testing faster and more efficient. Bluetooth technology means it communicates with all your Bluetooth accessories without using wires.  In fact, there are no wires at all because it runs on high powered In-Situ rechargeable batteries so youre free to move from test to test.  Weighing in at under 1kg and measuring only 26 x 10cm makes the PrimeTest 350 the ideal tester for getting into hard to reach places. The PrimeTest 350 PAT Tester is a facilities management tool because through data logging and capture it also records asset location helping you meet Health and Safety standards.  Whats more, this PAT Tester does every test you need to meet the IET Code of Practice revisions. Thanks to the revolutionary PrimeTest 350 PAT Tester, you can shorten your working hours because this top of the range PAT Tester is loaded with the latest technology making testing faster and more efficient. Bluetooth technology means it communicates with all your Bluetooth accessories without using wires.  In fact, there are no wires at all because it runs on high powered In-Situ rechargeable batteries so youre free to move from test to test.  Weighing in at under 1kg and measuring only 26 x 10cm makes the PrimeTest 350 the ideal tester for getting into hard to reach places. The PrimeTest 350 PAT Tester is a facilities management tool because through data logging and capture it also records asset location helping you meet Health and Safety standards.  Whats more, this PAT Tester does every test you need to meet the IET Code of Practice revisions. Features of the PrimeTest 350: Hand Held Battery Powered Definable Test USB and Bluetooth Download 6 AA In-situ Rechargeable Batteries Alternative Leakage Test, as described in the IET Code of Practice. 250v Insulation Test.  For use when suppressors or other components prevent a 500V insulation test. Load Measurement. During the protective conductor and touch current tests, the load is measured and displayed as both a power and current measurement. Calibration is NOT included. Seaward PrimeTest 350 Kits http://www.pat-services.co.uk/seaward-primetest-350-kit-1-1023.htm http://www.pat-services.co.uk/fluke-sp1000-mini-printer-1021.htm Without using any additional software the SP1000 can be used to directly print out stored test records on to thermal paper. The printer is compact and easily transported and is ideal for test professionals who need to issue an immediate written account of work carried out. The printer is powered by a rechargeable battery and comes complete with mains charger and RS232 Printer Lead. Compatible with: SmartPAT 5500 PAT Tester Fluke 6500 PAT Tester Fluke 6200 PAT Tester   PAT Tester Accessories http://www.pat-services.co.uk/fluke-sp1000-mini-printer-1021.htm http://www.pat-services.co.uk/seaward-bluetooth-printer-adaptor-1019.htm This Bluetooth adaptor has been developed to enable the Test n Tag Kit to work with the Primetest 300. Its so easy to connect, simply plug the adaptor into the printer and the printers power supply means that the printer is then Bluetooth ready. PAT Tester Accessories http://www.pat-services.co.uk/seaward-bluetooth-printer-adaptor-1019.htm http://www.pat-services.co.uk/mtp300-printek-printer-1017.htm Printek MtP300 Mobile Printer to use with your Metrel PAT Tester Prints your company logo on label Gives a professional appearance - no hand writing! Every result stored Small and easy to transport Test codes printed on tags These printers are tested and configured to work with your Metrel PAT System. This printer comes in two models: MtP400 - 4" Label Printer MtP300 - 3" Label Printer PAT Tester Accessories http://www.pat-services.co.uk/mtp300-printek-printer-1017.htm http://www.pat-services.co.uk/printek-mobile-printer-mtp400-1015.htm Printek MtP400 Mobile Printer to use with your Metrel PAT Tester Prints your company logo on label Gives a professional appearance - no hand writing! Every result stored Small and easy to transport Test codes printed on tags These printers are tested and configured to work with your Metrel PAT System. This printer comes in two models: MtP400 - 4" Label Printer MtP300 - 3" Label Printer PAT Tester Accessories http://www.pat-services.co.uk/printek-mobile-printer-mtp400-1015.htm http://www.pat-services.co.uk/transmille-6080-plus-pat-tester-1013.htm The 6080 Professional PAT Tester has all of the functions of a good PAT Tester with dual voltage capability for complete 110V/230V compatibility with sockets for each voltage. The IEC / extension lead check function allows leads to be verified at the press of a button. Using the self check function, the 6080 can be verified using its own built in test facility simply connect to the self check terminals to verify PAT operation. This unique function avoids the need for a separate test box. The 6080 also includes larger battery capacity to provide typically up to 700 tests between charging. The 6080 PLUS PAT Tester Is the same as the 6080 but with the following extra features added Designed especially for detailed PAT record keeping QWERTY keyboard for data entry of asset number, description and retest dates Stores up to 600 appliance records Data download capability Barcode reader options Suitability Level: PAT Testers Electrical Contractors Manufacturers Facilities Managers Schools & Colleges Key Features: Easy to use Ultra fast testing Slider for lead length calculator Rugged and Portable Professional PAT Testers http://www.pat-services.co.uk/transmille-6080-plus-pat-tester-1013.htm http://www.pat-services.co.uk/transmille-6080-pat-tester-1011.htm The 6080 Professional PAT Tester has all of the functions of a good PAT Tester with dual voltage capability for complete 110V/230V compatibility with sockets for each voltage. The IEC / extension lead check function allows leads to be verified at the press of a button. Using the self check function, the 6080 can be verified using its own built in test facility simply connect to the self check terminals to verify PAT operation. This unique function avoids the need for a separate test box. The 6080 also includes larger battery capacity to provide typically up to 700 tests between charging. Suitability Level: PAT Testers Electrical Contractors Manufacturers Facilities Managers Schools & Colleges Key Features: Easy to use Ultra fast testing Slider for lead length calculator Rugged and Portable   Professional PAT Testers http://www.pat-services.co.uk/transmille-6080-pat-tester-1011.htm http://www.pat-services.co.uk/seaward-primetest-300-kit-5-1009.htm An excellent professional PAT testing kit with PATGuard Elite Software for data management and a Barcode Scanner to speed up your testing!  We've also included a Test 'n' Tag Elite printer to save even more time  Seaward PrimeTest 300 Kit 5 - Ultimate Printer PAT Tester Kit includes: Seaward PrimeTest 300 PAT Tester Seaward Test n Tag Elite Printer Seaward PATGuard Elite V2 Software Bluetooth Barcode Scanner Socket & See SOK 32 Professional Socket Tester 230v Plug (13amp) to IEC Socket IEC Socket to 110v Plug (16amp) Delux Carry Case for easy transportation and protection of your PAT Testing Kit!  Comes with customisable foam, so you can snugly fit whatever equipment you would like to take on siteAlso comes supplied with: Soft Carry Case Test Lead and Crocodile Clip Earth Bond Lead Mains Lead 8 AA Rechargeable Batteries Battery Charger with Mains/Car Charger Lead 240v Plug to 110v Adapter for testing 110v appliances USB Bluetooth Adaptor with Installation CD Reference Guide Instruction Manual with CD The Seaward PrimeTest 300 is the smallest, smartest and fastest PAT Tester around! The PrimeTest 300 has been specifically designed to boost the Portable Appliance Test productivity of Electrical Contractors and service engineersby making PAT Testing faster and easier. Lightweight and handheld, the PrimeTest 300 PAT Tester incorporates all Class I and Class II electrical safety tests in a compact user-friendly design. Long life battery power eliminates the reliance on mains supply, reduces downtime between tests and makes the instrument totally practical and portable to use anywhere. The PrimeTest 300's intuitive and fast user interface supports straightforward operation and test control in either manual or automatic test modes. Operating features include fast start up and a large backlit display which is supported by a full alphanumeric keypad, including programmable soft keys for customised test routines. A large internal memory facility allows the storage of test results for safety audit and traceability purposes. In addition to recording test results, the tester can also record other details and descriptions of the equipment under test. Cable Free Testing Bluetooth technology allows the wireless connection of a Bluetooth Barcode Scanner (included), Seaward Test n Tag Elite Printer (included) and other accessories - eliminating the need to constantly plug and unplug leads and cords, allowing totally cable-free testing. A wireless connection also means that stored data can be transferred immediately and directly from the tester to a PC and edited with various software packages such as Seaward PATGuard Elite V2 (included) at the touch of a button. Features of the PrimeTest 300: Intuitive and fast user interface Manual and automatic test modes User definable and configurable test sequences Graphic display Full alphanumeric keypad Large memory for storing results and test programs Brain cell capabilityCalibration is NOT included. Seaward PrimeTest 300 Kits http://www.pat-services.co.uk/seaward-primetest-300-kit-5-1009.htm http://www.pat-services.co.uk/seaward-primetest-300-kit-4-1007.htm An excellent professional PAT testing kit with PATGuard Pro Software for data management and a Barcode Scanner to speed up your testing!  We've also included a Test 'n' Tag Elite printer to save even more time  Seaward PrimeTest 300 Kit 4 - Pro Printer PAT Tester Kit includes: Seaward PrimeTest 300 PAT Tester Seaward Test n Tag Elite Printer Seaward PATGuard Pro V2 Software Bluetooth Barcode Scanner Socket & See SOK 32 Professional Socket Tester 230v Plug (13amp) to IEC Socket IEC Socket to 110v Plug (16amp) Delux Carry Case for easy transportation and protection of your PAT Testing Kit!  Comes with customisable foam, so you can snugly fit whatever equipment you would like to take on site Also comes supplied with: Soft Carry Case Test Lead and Crocodile Clip Earth Bond Lead Mains Lead 8 AA Rechargeable Batteries Battery Charger with Mains/Car Charger Lead 240v Plug to 110v Adapter for testing 110v appliances USB Bluetooth Adaptor with Installation CD Reference Guide Instruction Manual with CD The Seaward PrimeTest 300 is the smallest, smartest and fastest PAT Tester around! The PrimeTest 300 has been specifically designed to boost the Portable Appliance Test productivity of Electrical Contractors and service engineersby making PAT Testing faster and easier. Lightweight and handheld, the PrimeTest 300 PAT Tester incorporates all Class I and Class II electrical safety tests in a compact user-friendly design. Long life battery power eliminates the reliance on mains supply, reduces downtime between tests and makes the instrument totally practical and portable to use anywhere. The PrimeTest 300's intuitive and fast user interface supports straightforward operation and test control in either manual or automatic test modes. Operating features include fast start up and a large backlit display which is supported by a full alphanumeric keypad, including programmable soft keys for customised test routines. A large internal memory facility allows the storage of test results for safety audit and traceability purposes. In addition to recording test results, the tester can also record other details and descriptions of the equipment under test. Cable Free Testing Bluetooth technology allows the wireless connection of a Bluetooth Barcode Scanner (included), Seaward Test n Tag Elite Printer (included) and other accessories - eliminating the need to constantly plug and unplug leads and cords, allowing totally cable-free testing. A wireless connection also means that stored data can be transferred immediately and directly from the tester to a PC and edited with various software packages such as Seaward PATGuard Pro V2 (included) at the touch of a button. Features of the PrimeTest 300: Intuitive and fast user interface Manual and automatic test modes User definable and configurable test sequences Graphic display Full alphanumeric keypad Large memory for storing results and test programs Brain cell capabilityCalibration is NOT included. Seaward PrimeTest 300 Kits http://www.pat-services.co.uk/seaward-primetest-300-kit-4-1007.htm http://www.pat-services.co.uk/metrel-swiftpat-mi3302-pat-tester-1005.htm The Metrel SwiftPAT MI 3302 Kit is new to the market. It is a manual PAT Tester that is great for those who have little experience in PAT Testing. Simple to operate, the Metrel MI 3302 will give a clear PASS or Fail reading and clearly displays all results on it's bright LCD screen.This tester comes already calibrated and includes a 110V adapter for testing 110v electrical appliances. The Metrel SwiftPAT MI 3302 also comes with 3 years warranty.Metrel SwiftPAT MI 3302 is ideal for: Maintenance Staff Schools & Colleges Care Homes Leisure IndustryMetrel SwiftPAT MI 3302 key features: Bright LCD screen Mains powered PortableMetrel SwiftPAT MI 3302 kit includes: Earth Bond Test Lead Mains Lead 240v Plug to 110v Adaptor for testing 110v appliances Instruction Manual Metrel MI3302 Soft Carry Case 3 Year WarrantyCalibration is included FREE. Budget PAT Testers http://www.pat-services.co.uk/metrel-swiftpat-mi3302-pat-tester-1005.htm http://www.pat-services.co.uk/iec-clover-leaf-adaptor-1003.htm Used for testing clover leaf IEC leads as used in many computers. This handy adaptor is very useful and can be used with all PAT Testers. Adaptor Leads and Cables http://www.pat-services.co.uk/iec-clover-leaf-adaptor-1003.htm http://www.pat-services.co.uk/fluke-sm200-socket-tester-997.htm The Fluke SM200 Professional Socket Tester is a fast way to check if your sockets are safe. Fluke has introduced a range of professional electrical socket testers with modern, ergonomic and durable designs. The range includes the Fluke SM100, SM200 and SM300, professional tools designed for contractors to rapidly and reliably test the safety of installed mains sockets. Socket Testers http://www.pat-services.co.uk/fluke-sm200-socket-tester-997.htm http://www.pat-services.co.uk/edition-multifunction-tester-992.htm The UK's first 17th Edition Multifunction Testerthe Di-log 9083P The all new 9083P Multi-function tester has been designed to meet the requirements of the new 17th Edition, the current Part P requirements and is fully compliant with the performance requirements of BS EN 61557. It also  incorporates many features that end users have requested. The unique high speed RCD-LOC feature allows loop testing without tripping and type of RCD. Continuity test - with auto null facility to zero out lead resistance RCD testing -  trip time, trip current, ramp current  Prospective short circuit current - direct readout of PSCC 100, 250, 500V - insulation measurement test voltages Loop impedance - unique loop principal will not trip any RCD RCD auto test - tests RCD's in auto mode without going back to the tester Integrated socket polarity test Fully protected - against damage when accidently connected across phases Manufactured in the UK FREE CombiVolt 2 worth 58.00 when you buy the 9083P* *Web Orders Only Terms and Conditions apply. Installation Testers http://www.pat-services.co.uk/edition-multifunction-tester-992.htm http://www.pat-services.co.uk/kewtech-kt64-kit-989.htm The ultimate 17th Edition tester kit - get it all in one easy purchase. The Kewtech KT64 Multifunction tester uses anti-trip technology and can perform Insulation, Continuity, Loop, PSC and RCD tests. Get this and all of the following in this special offer kitonly from PASS. KT64 Kit includes: KT64 Multifunction Tester The LightMate Connector Set (5 connectors)  50m Wander Lead TC1 Book - Electrical Installation Certificate Kewcheck R2 4mm Socket test adaptor Installation Testers http://www.pat-services.co.uk/kewtech-kt64-kit-989.htm http://www.pat-services.co.uk/seaward-practice-compliance-upgrade-987.htm To comply with the stated requirement for the routine checking of a testers accuracy, the kit includes the PAT CheckBox, providing a safe, simple and quick means of checking the calibration of Portable Appliance Testers. Also included is the RC 750 RCD tester, a handheld digital unit that helps your tester comply with the requirement for RCD trip time test on adapots and extenstion leads. There, compliance made easy. PAT Tester Accessories http://www.pat-services.co.uk/seaward-practice-compliance-upgrade-987.htm http://www.pat-services.co.uk/seaward-powercheck-1557-checkbox-985.htm The powercheck 1557 is the worlds first checkbox to verify the calibration of both PAT and Installation test equipment. The PowerCheck 1557 tests: Full Earth Continuity Insulation Resistance RCD Trip Time RCD Trip Current Loop PE Conductor Current Touch Current Flash test verification 17th Edition compliant. IEE Code of Practice compliant. Tests to BS 7671/EN 61557. The most comprehensive range of tests available. Confirm performance between calibrations. Rugged and robust. Does not trip RCDs Compatible with all tester brands.   PAT Tester Accessories http://www.pat-services.co.uk/seaward-powercheck-1557-checkbox-985.htm http://www.pat-services.co.uk/seaward-professional-patsolutions-983.htm Professional PATSolutions Kit includes: Primetest 220 Pat Tester PAT Checkbox 500 Pass Labels 110V Adaptor PAT Guide PAT Tester Accessories http://www.pat-services.co.uk/seaward-professional-patsolutions-983.htm http://www.pat-services.co.uk/kewtech-lightmate-connector-set-981.htm Get the whole set of Lightmate Connectors. The set comes with: Lightmate Bayonet Connection Lightmate Edison Screw Lightmate GU10 Halogen spotlights/downlighters Lightmate Small Bayonet Connection Lightmate Small Edison Screw Visit our Lightmate Promo Page: http://www.pat-services.co.uk/kewtech-lightmate-promotion.html Accessories http://www.pat-services.co.uk/kewtech-lightmate-connector-set-981.htm http://www.pat-services.co.uk/kewtech-sbc-lightmate-small-bayonet-979.htm The Small Bayonet Connection Lightmate Lightmates are an essential testing accessory to facilitate fast and safe testing for Loop Impedance, and R1& R2 Testing of Lighting Circuits.   They are the easiest way to test light fittings. Simply unscrew fitting. Plug in Lightmate and Connect tester. TEST!   It really is that quick. Get a full set of Lightmates Click the following link for more information: http://www.pat-services.co.uk/kewtech-lightmate-promotion.html Accessories http://www.pat-services.co.uk/kewtech-sbc-lightmate-small-bayonet-979.htm http://www.pat-services.co.uk/kewtech-ses-lightmate-small-edison-977.htm The Small Edison Screw Lightmate. Lightmates are an essential testing accessory to facilitate fast and safe testing for Loop Impedance, and R1& R2 Testing of Lighting Circuits. They are the easiest way to test light fittings. Simply unscrew fitting. Plug in Lightmate and Connect tester. TEST! It really is that quick. Get a Full set of Lightmates Click the following link for more information: http://www.pat-services.co.uk/kewtech-lightmate-promotion.html   Accessories http://www.pat-services.co.uk/kewtech-ses-lightmate-small-edison-977.htm http://www.pat-services.co.uk/kewtech-gu10-lightmate-halogen-975.htm GU10 Halogen spotlights/downlighters lightmate Lightmates are an essential testing accessory to facilitate fast and safe testing for Loop Impedance, and R1& R2 Testing of Lighting Circuits. They are the easiest way to test light fittings. Simply unscrew fitting. Plug in Lightmate and Connect tester. TEST! It really is that quick. Get a Full set of Lightmates Click the following link for more information: http://www.pat-services.co.uk/kewtech-lightmate-promotion.html Accesso