Wander Lead

Click image to enlarge

50 Metre wander lead 4mm for use with all insulation testers and Multifinction testers.

Ideal for testing circuits such as light fittings and ceiling roses where a long wander lead is required.

The wander lead has 50 metres of cable terminated with a 4mm plug which fits into your multimeter or multifunction installation tester and a 4 mm socket in the front of the reel.

This wander lead is an essential accessory. It is the best way to test for earth bond continuity as well as for R2 measurements. It comes with it's own crocodile clip.

First, measure the resistance of the test lead itself and record or if your installation tester has an auto null facility  zero out the lead.

Connect the crocodile clip to the loose end of the wander lead and connect it to the earth at the DB.

Unwind however much cable you need from the wander test lead then connect the continuity tester to the extension reels 4mm connector and to the point to be tested.

One end of the earth bonding should be disconnected to avoid parallel earths.

You can relly save time when you use this is conjunction with a socket test adapter such as the Kewcheck R2 or Socket and See SS130 socket test adapter.