Fluke 1AC II Voltage Detector Details
Voltage detection made easy. The Fluke 1 AC II simply requires you to hold the detector near to a voltage source; if voltage is detected, the 1 AC II will begin to glow with an internal red light and will emit an audible beeping tone.
To ensure accuracy is maintained constantly the 1 AC II will continuously test itself internally to make sure the tester works correctly.
This voltage detector can test voltage from 90 to 1000V and is CAT IV 1000V safety rated.
- Technical Specs
Fluke 1AC VoltAlert Technical Specifications
|Operating Principle||Senses the steady state electrostatic field produce by AC voltage through
insulation without requiring contact to the bare conductor. A red glow at
the tip and a beeping noise (if not switched OFF) indicates voltage presence.
|Voltage Sensing Ranges|| Nominally, 90V AC to 1000V AC or 200V AC to 1000V AC depending on model,
45 to 405Hz; also a 20V to 90V control circuit model
|Detector Tip Style||Blade or round, depending on model|
|Light Source||One high intensity red LED|
|Agency Approvals||c CSA us, CE, C-Tick|
|Safety Rating||CAT IV 1000V|
|Operating Temperature||-10 to 50°C|
| Operating Humidity Ranges
||0 to 95% (0 to 30°C)
0 to 75% (30 to 40°C)
0 to 45% (40 to 55°C)
||2 AAA alkaline batteries included|