Fluke 1654B Multifunction Tester + FREE Super Rod Kit

Click images to enlarge

For a limited time get a FREE Super Rod CRSS Standard Plus Set (RRP: £32.49) with this Multifunction Installation Tester! Terms & Conditions apply.

Fluke 1654B Installation Tester: The complete test instrument for advanced users

The Fluke 1654B is one of the most complete installation testers on the market today. It includes everything a contractor could need, such as inbuilt memory and a wide range of test functions.

New RCD Type B applications
• Mains systems with frequency converters (i.e. building sites), appliances including switch mode power supplies, solar systems must be protected with RCD type B (draft IEC 60364-5-53 / DIN VDE 0100-530, IEC 60364-7-712 / DIN VDE 0100-712).
• In the event of an insulation fault the leakage current could be a pure DC current, which is only detected by RCD type B.
• The Fluke 1654B Electrical Tester has a full RCD testing function which includes RCD type AC, A and the new RCD type B.

Fast and innovative
• Take two measurements at once with a dual display. PEFC/PSC and loop impedance are measured and displayed in parallel.
• Brand new high current loop mode. Faster measurements in comparison to loop tests with non-trip mode for RCD’s.
• Fast voltage measurement between L-N, L-PE and N-PE using the mains cord. No need to change measurement connections.
• The latest Fluke 1650 series of testers come with a Zero Adaptor for fast, reliable and accurate test lead and mains cord compensation. This Adaptor can be used for mains plugs, probes, alligator clips and more.
• The Fluke 1654B Multifunction Installation Tester comes with a slim probe with test button so you can keep your eyes on the display while probing difficult to reach points.

Rugged, safe and easy to use
• Compact and lightweight, the Fluke 1654B Tester weighs only 1.3KG and can withstand a drop from 1m.
• Earth Volt Touchpad detects raised earth voltages >50V, indicating potential dangerous situations.
• As standard this Fluke instrument is supplied with fused test leads that comply with GS38.
• Forget complex multi-level menus, the Fluke 1654B Installation Tester has a simple rotary dial to select the function you need.
• Large backlit display, clear symbols and a wide viewing angle.

Fluke 1654B Multifunction Tester Key Features
• RCD type B test (smooth DC currents)
• mOhm resolution for Looptest
• Memory (up to 1500 test results)
• Extended data management
• Extended documentation mode
• Fast high current loop test
• Variable RCD current mode for customized settings
• PASS/FAIL indication for RCD tests
• Select voltage measurement between L-N, L-PE and N-PE
• Zero adapter for easy test lead compensation, available as new accessory and also included with standard scope of supply

Fluke 1600 Series Multifunction Tester Comparison

	1652C	1653B	1654B
Zero adapter	x	x	x
Volts (V)	x	x	x
Frequency (Hz)	x	x	x
Insulation (RISO)	x	x	x
Continuity (RLO)	x	x	x
Fast high current loop test (ZI)	x	x	x
Loop & line resistance-mΩ resolution			x
Short Circuit Current (PSC,PEFC, IK)	x	x	x
RCD FI Trip TimeTest  (FI, DDR)	x	x	x
Variable RCD current setting	x	x	x
Tests time-delayed RCD´s (S-type)	x	x	x
RCD Ramp Test  (FI, DDR)	x	x	x
RCD Auto Test  (FI, DDR)	x	x	x
Test of smooth dc sensitive RCD type B			x
Earth Resistance (RE)		x	x
Phase Sequence	x	x	x
Internal Memory		x	x
IR Interface for downloading data		x	x
Remote probe	x	x	x

Fluke 1654B Multifunction Tester Kit Includes
• Fluke 1654B Installation Tester
• Fluke TP165X Remote Control Probe
• Fluke TL165/UK Fused test lead set
• Fluke C1600 Hard Carrying Case
• Mains test cord
• Zero adapter
• Padded carrying strap
• Printed Quick reference guide
• Manual on CD ROM
• 6 AA batteries