DiLog DL6790 CombiVolt 2 LCD Digital Voltage & Continuity Tester

Click image to enlarge

DiLog CombiVolt 2 Voltage Tester and Continuity Tester with Phase Rotation Test.

The CombiVolt 2 three-in-one tester has a rugged, ergonomically formed housing for perfect handling.  Similar to the DiLog CombiVolt 1 Voltage / Continuity Tester DL6780 but with digital LCD display.

DiLog DL6790 CombiVolt 2 Voltage and Continuity Tester features:
• Digital LCD display
• Testing of AC/DC voltages from 12 to 690V AC/DC
• Continuity testing with optical and acoustic indication
• Automatic switching between voltage and continuity
• Three Phase Rotation detection system
• Intergrated single pole test for phase detection
• Short response time (<0,1s) for fast voltage tests
• Single pole phase indication
• Fully compliant with GS38
• Fully operational voltage indication even when batteries are discharged
• IP65 - water-jet and dust-tight protection for outdoor use
• Electrical torch function - for working in dark environments
• Probe-tip protection - for reducing the danger of injuries which may be cause by probe tip
• Designed and built according to IEC61010, IEC61243-3
• Proving unit friendly

DiLog DL6790 CombiVolt 2 Voltage and Continuity Tester specification:

Voltage
Voltage Display: 12 – 690 V AC/DC
LED Resolution: 12, 24, 50, 120, 230, 400, 690
LCD Resolution: 1 V +/- 3% + 8 digits
Voltage Detection: Automatic
Acoustic Signal: AC voltage – DC voltage
Polarity Detection: Full range
Response Time: LED < 0.1s, LCD <2s
Frequency Range: 0 – 400 Hz
Peak Current: Is<0.3A/Is(after 5s) <3.5 mA
Operation Time: 30s
Recovery Time: 10 min
Auto Power On: <12 V AC/DC

Single Pole Voltage Indication
Voltage Range: 100 – 690 V
Frequency Range: 50 – 400 Hz

Continuity
Measuring Range: 0 - 400 KΩ

Phase Rotation Test
Voltage Range: 100 – 690 V
Frequency: 45 – 65 Hz
Over Voltage Protection: 690 V AC/DC

Other
Power Supply: 2 x 1.5V LR03 battery
Dimensions: 255 x 70 x 28 mm
Weight: 200g