DiLog 9083P 17th Edition Multifunction Tester

Click images to enlarge

For a limited time, get the Di-Log 9083P Multifunction Tester with the following FREE accessories (RRP: £98.98!):

• DiLog DL1203 Carry Case with Harness
• DiLog DL6790 CombiVolt 2 Voltage and Continuity Tester

DiLog 9083P Multifunction Tester description:
Are you carrying out Part P or 17th Edition electrical work? The Di-Log 9083P Multifunction Tester meets all 17th Edition requirements, whilst remaining one of the cheapest testers on the market. This doesn’t mean that the Di-Log 9083P Multifunction Tester skimps on features; it incorporates everything the day-to-day electrician will need in a small hand-held unit.

Avoid tripping RCBD’s when you are loop testing with the Di-Log 9083P Multifunction Tester’s unique RCD-LOC feature. The Di-Log 9083P Multifunction Tester also allows you to measure insulation, test continuity, auto test RCD's, measure loop impedance, take direct readouts of PSCC (Prospective Short Circuit Current) and carry out socket polarity tests.

Capture and store test results from the Di-Log 9083P Multifunction Tester with optional Seaward PowerGuard Pro Software. Quickly and easily print all BS 767 1, BS 5839, NICEIC and NAPIT certificates and reports. If you would like to use a PDA with the Di-Log 9083P to upload your results to a computer, then see the optional PowerGuard Pro Mobile Software.

DiLog 9083P Multifunction Tester features:
• Continuity test – With auto null facility to zero out lead resistance
• RCD testing – Trip time, trip current, auto test and ramp current
• Prospective short circuit current – Direct readout of PSCC
• Insulation measurement – 100, 250 and 500V test voltages
• Loop Impedance – Loop test will not trip RCD’s
• RCD auto test – Test RCD’s in auto mode without going back to the tester
• Socket polarity test – Integrated into the DiLog 9083P Installation tester
• Fully protected – Cannot be damaged when accidently connected across phases
• Downloadable – Download the DiLog 9083P Tester into optional Seaward PowerGuard Pro Software.

DiLog 9083P Multifunction Tester kit includes:
• Di-Log 9083P Installation Tester
• Di-Log 9083P instruction manual
• Crocodile clips (red, black, green)
• 4mm shrouded safety test probes (red, black, green)
• Test lead 1.5m 13A UK plug to red, black, green 4mm shrouded safety plugs
• Test lead set 1.5m 13A plug to red, black, green 4mm shrouded safety plugs to red
• 6 x 1.5V cells LR6 type AA alkaline batteries
• 2 year warranty